Gundam Models Discussion Thread

[Haladflire65]

Hey, I'm interested in giving a shot at building a model - where's a good place to start? I don't think I'll have much access to tools or paint; would the HG 1/144 Gundam 00 ones be managable for a beginner? Help!

[Amber.Dawn]

HG Gundam 00 is nice. You can start with MG's if you want, but if you want to paint, panel line, etc, then HG 00 is a good start I'd say.

[Nerroth]

You could wait a bit, and get the 00 Raiser with the GN Sword III.


Alternatively, the Exia R2 is a very fine little kit, and already available...

[WaytoDawn]

man i forgot to post my arios in here

enjoy
ahhhh this finally done
this kit is quite troublesome, the seamline is quite a lot and some of them in difficult area like in the bottom of the foot
but thanks to sammy (from Zero-G Forum) who give me advice to make smooth texture, now i'm capable to make something reallly reeallly smooth

not as good as him or keita, but i will learn more in next project :p

actually this project is my project with my friend but because he so SLOWWW i'm finish earlier (he not even start yet)
well anyway
i'm only do some minor detailing in this kit like filling the empty area and add some panel line
and also this is the first time i'm using samuel decal and mark softener
it's working very very well
my decal now is become one with the surface

yayyy

enough with the chit chat
enjoy, and critique are always welcome (to be honest i don't like critique, but as a modeler we need that right?)

http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9724_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9727_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9728_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9729_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9731_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9732_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9734_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9736_resize.jpg[hr]
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9737_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9741_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9742_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9745_resize.jpg
http://i406.photobucket.com/albums/pp142/Rayfier/Arios/IMG_9748_resize.jpg

maybe i will do 1/100 00, Seravee and cherudim as well in the future (because i also have 1/100 exia, dynames and virtue)

Wow! Thats some amazing paintwork! Really inspirational! Btw, did you spray a layer of topcoat first before you place on the decals? Is that how you make them look so good?

[yusawateva]

http://farm3.static.flickr.com/2615/3975248211_54af528acc_m.jpg
http://farm3.static.flickr.com/2547/3975248307_e4db60e683_m.jpg
http://farm4.static.flickr.com/3471/3975248147_43d678f700_m.jpg
http://farm3.static.flickr.com/2479/3976011416_e0816c4303_m.jpg

credit : Ngee Khiong (http://www.ngeekhiong.blogspot.com/)

[X207]

I reckon it would look bad - plus, would it even attach to Exia? I mean... it has 3 holes (seen here : http://www.1999.co.jp/eng/image/10095809n2/40/2) and I'm sure that wouldn't go on Exia.

i think i saw an exia with the feathers here but i think the drive was off 0 gundam on that particular exia

[LoweGear]

While it's not really Gundam, I thought this was worth mentioning:

Master Grade Figurerise 1/8 Son Goku, December release 3,675 yen:

http://img43.imageshack.us/img43/1430/37621.jpg

:eyespin:

You know that them making MG Gundam Girls is now inevitable after this :uhoh:

[Vandalier]

Wow! Thats some amazing paintwork! Really inspirational! Btw, did you spray a layer of topcoat first before you place on the decals? Is that how you make them look so good?

well before i put decal
i spray GLOSS TOPCOAT
after that i'm lining it and then put the decal
after that i sprayed it with Flat Topcoat

[cupcakes4chris]

i think i saw an exia with the feathers here but i think the drive was off 0 gundam on that particular exia

Yeah, I know it won't fit on a 1/100 perfectly, but mods are possible. I just want to see if it looks nice or not..kinda planning a project for mg exia

[Suika-Esper]

Does anyone know a good glue or adhesive for metal to metal?

You could always use a soldering iron to weld the two pieces together. That would probably work better than just an adhesive.


Hey, I'm interested in giving a shot at building a model - where's a good place to start? I don't think I'll have much access to tools or paint; would the HG 1/144 Gundam 00 ones be managable for a beginner? Help!

The 00 HG's are fantastic to start with. They're a big improvement over some of the models from years ago. I remember my first model was the Tallgeese III from Endless Waltz. Whew- what a tough time I had figuring that out. The simplest designs are the best to start out with. The AEU Enact from 00 is pretty easy. I'd recommend one of them as a first.

[Tormenk]

While it's not really Gundam, I thought this was worth mentioning:

Master Grade Figurerise 1/8 Son Goku, December release 3,675 yen:

:eyespin:

You know that them making MG Gundam Girls is now inevitable after this :uhoh:

Complete with removeable armors and fully detailed inner frame. :naughty:

[GrahamAker]

where can get garage kits for mg exia to turn into exia r2

[Sworra]

You could always use a soldering iron to weld the two pieces together. That would probably work better than just an adhesive.

Thanks for the suggestion i will try that out.. Any other suggestions would be great. :)

[DRAGUN H.E.X.]

While it's not really Gundam, I thought this was worth mentioning:

Master Grade Figurerise 1/8 Son Goku, December release 3,675 yen:

http://img43.imageshack.us/img43/1430/37621.jpg

:eyespin:

You know that them making MG Gundam Girls is now inevitable after this :uhoh:

omg! what happened to his crotch & to the instructions, please stop pointing at it, we all know how it works :heh:

Complete with removeable armors and fully detailed inner frame. :naughty:

seriously?, including to the male pilots's crotch & even Piccolo's? :heh:

[X207]

Yeah, I know it won't fit on a 1/100 perfectly, but mods are possible. I just want to see if it looks nice or not..kinda planning a project for mg exia

found the post i was refering to on page 720something

Instruction pamphlet of O states that the GN Feather is a one-off thing for the original O for "Shock And Awe" purpose. But it was deemed to much of a wastage of GN Paticles for just some fancy fireworks and was left out of later designs.

But you can always use back the O's GN drive with a little creativity as demonstrated below :-

http://img143.imageshack.us/img143/2513/1252254581185.jpg (http://img143.imageshack.us/i/1252254581185.jpg/)

[Haladflire65]

How much work would HG Gundam Dynames (http://www.bandai-hobby.net/gundam00/product/hg/gundam_dynames.html) take to build? It's the suit I personally like most and would like to build it if possible, but I'm a complete beginner. Frankly I don't have much interest in Exia, and not a whole lot of time and money either. Is HCM Pro Dynames (http://www.bandai-hobby.net/gundam00/product/hcm/gundam_dynames.html) any good?

Which models are easiest to build and uses least additional supplies like paint or cutters? And decent quality?

Sorry for my endless questions and thanks in advance to anyone who answers them! :D

[kakakka]

You don't have to build HCM Pro.

You have to paint/colour the HG Dynames to look exactly like in the show. The building can take atleast 7 hours (that's my shortest, and I'm more of a beginner)

[Haladflire65]

Would it still look decent without painting? I just don't think I can get ahold of paint and have time to use it where I'm living right now.

[bio9205]

Hey, I'm interested in giving a shot at building a model - where's a good place to start? I don't think I'll have much access to tools or paint; would the HG 1/144 Gundam 00 ones be managable for a beginner? Help!

If you're only going to build, put on stickers, and panel line, without paint at all, HG 00 is definitely a good start. I have over 10 HG 00 kits, all unpainted, built directly out of the box, minimal panel lining.

And I see you're 14. I'm 15. :) You should be able to afford most of the HG 00 kits if you're not painting them. But I recommend you to panel line at least, they'll look better.

HG Dynames is pretty easy. One of the first few kits I got, though it is not very show-accurate due to the lack of paint. 00S2 kits are more show-accurate in terms of building them without paint.

[Hamachi]

How is the designer's colour Seravee?

Is Cherudim the only one out of the three 1/100 (Designer color ver.) without the LED gimmick?

[Haladflire65]

If you're only going to build, put on stickers, and panel line, without paint at all, HG 00 is definitely a good start. I have over 10 HG 00 kits, all unpainted, built directly out of the box, minimal panel lining.

And I see you're 14. I'm 15. :) You should be able to afford most of the HG 00 kits if you're not painting them. But I recommend you to panel line at least, they'll look better.

HG Dynames is pretty easy. One of the first few kits I got, though it is not very show-accurate due to the lack of paint. 00S2 kits are more show-accurate in terms of building them without paint.

Thanks for the info. I think I'll give HG Dynames a shot. :D

[bio9205]

Hmm, but looking at my HG Dynames, it's nothing compared to the painted version. You might want to have a look at the unpainted version before deciding.

[HiddenMessage]

How is the designer's colour Seravee?

Is Cherudim the only one out of the three 1/100 (Designer color ver.) without the LED gimmick?

The Manual from "http://www.1999.co.jp/eng/10097456" say the 1/100 Designer Color Cherudin kit includes the LED gimmick.

[X207]

i have a question regarding protecting paint from the dust. i know where to find such clear paint but im not sure which is better to use between the dull finish or shiny finish? i dont want the model to shine like orb's akatsuki but i do want a semi metallic finish so it shines a bit while keeping the colours a bit dark.

[darkstrife]

i have a question regarding protecting paint from the dust. i know where to find such clear paint but im not sure which is better to use between the dull finish or shiny finish? i dont want the model to shine like orb's akatsuki but i do want a semi metallic finish so it shines a bit while keeping the colours a bit dark.

using a clear or gloss topcoat will make ur kits more shinier as opposed to a flat or matt finish. it's kinda hard to achieve what you are describing as i'm not really proficient with painting myself. if you want a metallic finish you can buy either metallic gold or silver spraypaint from Tamiya. you'll need an undercoat of Black paint first before applying either of the above paints so that the finish is smooth

also if u use an metallic paint, u cant use any topcoat as it will ruin the finish.
hope this helps!!!:)

[LoweGear]

Guess the grade?

http://i203.photobucket.com/albums/aa299/spec_operations/3980101580_21d95622d4.jpg
http://i203.photobucket.com/albums/aa299/spec_operations/3979341847_20bd5640a2.jpg

Yep, PG 00 Raiser preview :eek::eek::eek:

Images from Ngeekhiong

[GrahamAker]

who is goin for pg 00? damn costly!

[Critias]

using a clear or gloss topcoat will make ur kits more shinier as opposed to a flat or matt finish. it's kinda hard to achieve what you are describing as i'm not really proficient with painting myself. if you want a metallic finish you can buy either metallic gold or silver spraypaint from Tamiya. you'll need an undercoat of Black paint first before applying either of the above paints so that the finish is smooth

also if u use an metallic paint, u cant use any topcoat as it will ruin the finish.
hope this helps!!!:)

Hey how come black paint for an undercoat for silver/metallic paints? I've never used those paints before, but always wanted to try it. Since I usually use white/gray primer before I paint, would there be much difference if I used black?

[Amber.Dawn]

Tempting, but too expensive for my taste.

[kakakka]

http://farm3.static.flickr.com/2537/3979560375_1fab3c2033.jpg
So it looks like this? Looks like a 'pass', phew. :heh:

[X207]

using a clear or gloss topcoat will make ur kits more shinier as opposed to a flat or matt finish. it's kinda hard to achieve what you are describing as i'm not really proficient with painting myself. if you want a metallic finish you can buy either metallic gold or silver spraypaint from Tamiya. you'll need an undercoat of Black paint first before applying either of the above paints so that the finish is smooth

also if u use an metallic paint, u cant use any topcoat as it will ruin the finish.
hope this helps!!!:)

thanks, that helps alot. i always wondered how they make it metallic. ive started my hg144 00 gundam, the chest and gn drives are done. once i get some pics of the GN sword 2 and the apporiate transparent blue paint.

[darkstrife]

No Worries X207, glad to help :D

Hey how come black paint for an undercoat for silver/metallic paints? I've never used those paints before, but always wanted to try it. Since I usually use white/gray primer before I paint, would there be much difference if I used black?

Tamiya actually recommends spraying Black as an undercoat themselves, i believe the reason is so that the metallic silver (or gold) has a consistent finish on the painted piece. if no undercoat is used, the finish may look darker or lighter in some areas compared to the rest.

as with using primers, i havent used them before so i couldnt tell u if they would make any difference, i painted my MG Hi-nu a few months ago using metallic silver, if u look at the silver spots, u can see that the paint is consistent and even as i applied a black spray beforehand

http://img32.imageshack.us/img32/3685/dsc00286a.th.jpg (http://img32.imageshack.us/i/dsc00286a.jpg/)

[Nightwing(T_T)]

wow :twitch:


http://i36.tinypic.com/72fwgz.jpg


http://i38.tinypic.com/1zg6d7b.jpg


http://i38.tinypic.com/24oavr4.jpg


frankly speaking it looks great. now if somehow I could do something about the shipping fee and get the price cut ..... :upset:

[SonicSP]

wow :twitch:


http://i36.tinypic.com/72fwgz.jpg


http://i38.tinypic.com/1zg6d7b.jpg


http://i38.tinypic.com/24oavr4.jpg


frankly speaking it looks great. now if somehow I could do something about the shipping fee and get the price cut ..... :upset:


Guess the grade?

http://i203.photobucket.com/albums/aa299/spec_operations/3980101580_21d95622d4.jpg
http://i203.photobucket.com/albums/aa299/spec_operations/3979341847_20bd5640a2.jpg

Yep, PG 00 Raiser preview :eek::eek::eek:

Images from Ngeekhiong

Are those real GN Particles!!!????I never knew they exist.Wow,I guess we're paying for that huh?

:(............................that 00 is beautiful.But such luxuries can only be afforded by Kings and Queens.At least Emperor/Empresses get discounts.

I think my HG 00 just became One Year Old recently.I better buy him a cake,because I'm not getting the PG anytime soon.

http://farm3.static.flickr.com/2537/3979560375_1fab3c2033.jpg
So it looks like this? Looks like a 'pass', phew. :heh:

I knew Bandai would take advantage of this.I'm looking forward to the manual more than the kit for any 2 Drive mention.

I always liked the color scheme more than the Susanowo,so maybe I'll give it a shot.






Question:Alright,the 00 Gundam's GN Sword II equipment has a blue crystal sensor on it right?

Well,anybody got any suggestions on what color should be used for the Trans-Am version?because there's no color guide and I have no ideas on this.

[Rising Dragon]

Err, those GN-Particles were likely added to the picture via photoshop, Sonic.

[SonicSP]

By the way,is that the GN-Sword III being attached to 0 Raiser?

Huh,reminds me a bit of XN Raiser......


I know its early,but I haven't seen any good poses from this PG yet,which makes me worried a bit considering how........unfortunate the 1/100 was.A shame,considering the HG was pretty great.I hope it wont dissapoint.

Still,I will be enjoying the pictures of these,that is for sure.

[Rising Dragon]

Looks like its attached there. I like the idea of how the 0-Raiser has equippable weapon pods... those could really up the combat capability of the 00 Raiser.

[bio9205]

I'm going to Japan this year. Definitely picking up a couple of PG 00 with the exclusive parts. :)

[SonicSP]

I'm going to Japan this year. Definitely picking up a couple of PG 00 with the exclusive parts. :)

Wow.........a couple?That's really alot.

Good luck building them.PGs are really hard and stressful,I'm just getting annoyed by HGs these days,now that my schedule is tighter.

[WaytoDawn]

Well, its been quite some time since i've bought my first airbrush and compressor and i've finally got the time to test it out. I had an Exia lying around so might as well tried experimenting on that. This is indeed the first kit i've tried fixing the seam lines, sand, primer, paint and so on. It was a real enjoyable experience for me and i've managed to learn a few things *not to mention some heartbreaking mistakes like paint chipping, fingerprints on paint, etc...*Well, here are the pics!

http://img96.imageshack.us/img96/3923/05102009406.th.jpg (http://img96.imageshack.us/i/05102009406.jpg/)
http://img96.imageshack.us/img96/1783/05102009398.th.jpg (http://img96.imageshack.us/i/05102009398.jpg/)
http://img203.imageshack.us/img203/2830/05102009400.th.jpg (http://img203.imageshack.us/i/05102009400.jpg/)
Album link- http://img96.imageshack.us/gal.php?g=05102009406.jpg

Well, thats it! Comments and advice of improvements appreciated!

[GrahamAker]

is it hg 1/144 exia or 1/100?

[Calvin329]

http://i36.tinypic.com/72fwgz.jpg



That. Is. Amazing. O_O

Awesome art.

I wonder what the box art would be like. XD

[helois]

damn Bandai!!!!! the 00 raiser could be my first PG...

[pumpkins]

maybe they'll include those clear plastic pieces with green dots like in the nu gundam =X

[LoweGear]

wow :twitch:


http://i36.tinypic.com/72fwgz.jpg


http://i38.tinypic.com/1zg6d7b.jpg


http://i38.tinypic.com/24oavr4.jpg


frankly speaking it looks great. now if somehow I could do something about the shipping fee and get the price cut ..... :upset:

Nice, though keep in mind that these are CGI images and not the actual physical models. Though I like how the GN Sword III attaches to the O Raiser.

[duotiga]

PG 00 Raiser is too cool

[MakubeX2]

The official development blog :-

http://bandai-hobby.net/hobbyblog/pg_00raiser/

Love how they commented how the kit is to the PG Red Frame :-

> アストレイに負けず劣らずの重量級の本商品。

So it will only be a slight improvement, huh ?

[LightningZERO]

Man, PG 00 Raiser is all kind of awesomeness.

I can't afford the price. Too bad

[MakubeX2]

Man, PG 00 Raiser is all kind of awesomeness.

I can't afford the price. Too bad

Look on the bright side, the developers said "it will be as good as the Astray" and look at how the PG Astray Red Frame turns out.

[Alexus_Z3]

wow :twitch:


http://i36.tinypic.com/72fwgz.jpg


http://i38.tinypic.com/1zg6d7b.jpg


http://i38.tinypic.com/24oavr4.jpg


frankly speaking it looks great. now if somehow I could do something about the shipping fee and get the price cut ..... :upset:
This is really tempting but I don't know what to do about the price :(

[Haladflire65]

What I've always thought about Gundam models is that they're always looks so cool in those promotional pictures, but when you see the actual thing it just looks like... plastic.

But I think the PG 00 Raiser's pretty awesome.

Correction: Very awesome.

[Nerroth]

So, I started my first attempt at a painted gunpla.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject1.jpg

I don't have time to get it all done in one sitting - which is the first time that's happened, too. Usually, I can get through the build, whip out the Gundam Marker and be more or less done. Not this time.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject2.jpg

The Reborns has more sprues in the box than any other HG figure I've gotten so far - but then, I got my 00 and 0 Raiser models separately.

Right now, I'm trying to assemble each module bit by but, painting up the most prominent surfaces as I go, and planning to go back over to get the rest of the surface detail (and the panel lining) in once I'm finished with the build.


So far, I'm at this stage:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject3.jpg

I had to cheat a bit, by using the purple stickers - but I tried to paint in other details I would have otherwise used transfers for.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject4.jpg

If I ever work out a good way to mix clear purple (or ever see a clear purple paint to buy) I'll go back over the chest piece...

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject5.jpg

I dunno if it's out of me being a bit more careful due to not wanting to mess up any drying paint, but I feel that the fold-out engine piece might be a little less than fully in the right position. But then, that might be just the way the model itself works.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProkect6.jpg

I forgot to take a pic showing the Cannon visor - which really looks cool when you apply the clear green paint, actually - but I'll try to note that for next time.


So, here's hoping things will look a bit more promising by day 2!

[Amber.Dawn]

What I've always thought about Gundam models is that they're always looks so cool in those promotional pictures, but when you see the actual thing it just looks like... plastic.

But I think the PG 00 Raiser's pretty awesome.

Correction: Very awesome.

Hmm, really? I often find the actual model in front of me to be cooler than pics online.

[Amber.Dawn]

Look on the bright side, the developers said "it will be as good as the Astray" and look at how the PG Astray Red Frame turns out.

Umm, you said the PG Red Frame was bad, didn't you?

[WaytoDawn]

is it hg 1/144 exia or 1/100?

Its a HG 1/144 exia.
That PG Raiser sure is nice!

[bio9205]

So, I started my first attempt at a painted gunpla.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject1.jpg

I don't have time to get it all done in one sitting - which is the first time that's happened, too. Usually, I can get through the build, whip out the Gundam Marker and be more or less done. Not this time.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject2.jpg

The Reborns has more sprues in the box than any other HG figure I've gotten so far - but then, I got my 00 and 0 Raiser models separately.

Right now, I'm trying to assemble each module bit by but, painting up the most prominent surfaces as I go, and planning to go back over to get the rest of the surface detail (and the panel lining) in once I'm finished with the build.


So far, I'm at this stage:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject3.jpg

I had to cheat a bit, by using the purple stickers - but I tried to paint in other details I would have otherwise used transfers for.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject4.jpg

If I ever work out a good way to mix clear purple (or ever see a clear purple paint to buy) I'll go back over the chest piece...

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject5.jpg

I dunno if it's out of me being a bit more careful due to not wanting to mess up any drying paint, but I feel that the fold-out engine piece might be a little less than fully in the right position. But then, that might be just the way the model itself works.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProkect6.jpg

I forgot to take a pic showing the Cannon visor - which really looks cool when you apply the clear green paint, actually - but I'll try to note that for next time.


So, here's hoping things will look a bit more promising by day 2!

Not bad. But the yellow you're using is in the wrong shade - it should be something like beige. Also, instead of purple paint, I suggest using a purple permanent marker. Any kind will do, they work pretty well. That's for the chest piece though, the forehead piece looks better unpainted.

And the drives are supposed to be orange, not green.

[KaiDamien]

Im curious, in the boxart of 1/100 astray mirage frame . Is the other MS the backside of astray mirage frame?

[GrahamAker]

Not bad. But the yellow you're using is in the wrong shade - it should be something like beige. Also, instead of purple paint, I suggest using a purple permanent marker. Any kind will do, they work pretty well. That's for the chest piece though, the forehead piece looks better unpainted.

And the drives are supposed to be orange, not green.

not bad at all . hes just trying to make tau twin drive suit into origiinal gn drive suit:heh:

[bio9205]

Well, that doesn't make sense. It looks out of place as well - the green doesn't go with Reborns' colour scheme. Maybe you can panel-line over the green with a black Gundam marker, it'll look much better.

[justsomeguy]

So, I started my first attempt at a painted gunpla.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject1.jpg

I don't have time to get it all done in one sitting - which is the first time that's happened, too. Usually, I can get through the build, whip out the Gundam Marker and be more or less done. Not this time.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject2.jpg

The Reborns has more sprues in the box than any other HG figure I've gotten so far - but then, I got my 00 and 0 Raiser models separately.

Right now, I'm trying to assemble each module bit by but, painting up the most prominent surfaces as I go, and planning to go back over to get the rest of the surface detail (and the panel lining) in once I'm finished with the build.


So far, I'm at this stage:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject3.jpg

I had to cheat a bit, by using the purple stickers - but I tried to paint in other details I would have otherwise used transfers for.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject4.jpg

If I ever work out a good way to mix clear purple (or ever see a clear purple paint to buy) I'll go back over the chest piece...

http://img.photobucket.com/albums/v108/Nerroth/RebornsProject5.jpg

I dunno if it's out of me being a bit more careful due to not wanting to mess up any drying paint, but I feel that the fold-out engine piece might be a little less than fully in the right position. But then, that might be just the way the model itself works.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProkect6.jpg

I forgot to take a pic showing the Cannon visor - which really looks cool when you apply the clear green paint, actually - but I'll try to note that for next time.


So, here's hoping things will look a bit more promising by day 2!
You might want to paint the edges of the chest crystal purple, so it looks less like a clear piece when viewed from the front.

[MakubeX2]

http://img33.imageshack.us/img33/9819/1254829716811.jpg (http://img33.imageshack.us/i/1254829716811.jpg/)

Bandai showing off their record of expecting to achieve nearly 5000,000 kits sold for their SD line in their local and oversea market by the end of this year, thanks to their ROTK franchise. No doubt they will continue to milk the ROTK line for the near future as it's much easier to design a SD kit than a standard real size kit for a mech.

[duotiga]

frankly speaking...i got no regrest on getting sd sanguo kits. the kits are great & fun doing it XD

[StratoSpear]

I just purchased Ignition Mode Exia for S$80... God, I can't wait for it to arrive!!

[X207]

doesnt tamiya have clear paints that can be mixed? i still need to get some light bllue for 00 gn swordII but you might get away with it by mixing red clear and blue clear paints?? i have yet to use clear colors but did cheat with throne drei by mixing normal colors.

[Okamidum]

Anyone have any insight of the Rick Dom and Gouf Custom from MS IGLOO. I really want either one but dalong didnt have much of a rating for it but they look nice.

[Tormenk]

doesnt tamiya have clear paints that can be mixed? i still need to get some light bllue for 00 gn swordII but you might get away with it by mixing red clear and blue clear paints?? i have yet to use clear colors but did cheat with throne drei by mixing normal colors.

Wouldn't that give you clear purple in the end? Tamiya's clear colors get darker with more coats so a light blue would be one or two coats at best. Otherwise you can source around for markers or highlighters for the light blue.

Anyone have any insight of the Rick Dom and Gouf Custom from MS IGLOO. I really want either one but dalong didnt have much of a rating for it but they look nice.

Basically recolors of the Dom and Gouf Custom released ages ago, with new decal sets. Look up the Dom to be sure, since there are subtle differences from it and the Rick Dom.

[Vandalier]

Yayyyy
tommorrow bandai will display PG 00

i hope tommorrow afternoon we already can see the picture

[bio9205]

Just started on my Reborns - done the head and torso. I don't paint, hardly panel-line - but it looks great! No regrets on this model indeed.

[GrimmReaperNL]

i just decided i've finished my blue frame and posed him with my other astray frames.

as there's no blue frame model (apart from the one that one discontinued a long time ago) i bought a 2nd green frame and painted the damn thing. bought some armored core weapon kits and made them work for blue frame. here's the result:
http://www.grimmreaper.nl/cpg/albums/Gallery/models/gunpla/gundam_seed/astray/mbf-p03/normal_DSC04989.JPG (http://www.grimmreaper.nl/cpg/thumbnails.php?album=60)
http://www.grimmreaper.nl/cpg/albums/Gallery/models/gunpla/gundam_seed/astray/astray%20frames/normal_DSC04996.JPG (http://www.grimmreaper.nl/cpg/displayimage.php?album=61&pos=0)
hope you like it (them)

[Nerroth]

Not bad. But the yellow you're using is in the wrong shade - it should be something like beige. Also, instead of purple paint, I suggest using a purple permanent marker. Any kind will do, they work pretty well. That's for the chest piece though, the forehead piece looks better unpainted.

And the drives are supposed to be orange, not green.

The yellow might be a little different than advertised, but I like the slightly richer paint on the model, personally.

Also, I coloured the Drives based on what one of the painted-up suits in... I think it was either Dengeki Hobby or Hobby Japan (I forget which, but the store I got the Reborns in carries both - and I saw it there).

Plus, I think the green looks well on the suit.

(I like to think of it as a standby mode, when it's not producing particles. Kind of like an inverse traffic-light system, or something!)

You might want to paint the edges of the chest crystal purple, so it looks less like a clear piece when viewed from the front.

As regards the purple, I'm not too sure which option to go for at the moment. I do want to have it cover the clear plastic, rather than be hidden behind it... I might try the marker option if I can't find a good way to paint something on.



Oh, and also:


Day 2


Yesterday, I finished the actual build, while chipping away at the paint work.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB1.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB2.jpg

The beam saber blade in the kit is not coloured - but a coat of clear red paint on it worked a treat!

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB3.jpg

Some more detail:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB4.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB5.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB6.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB7.jpg

A few comparison pics now, with the Reborns Gundam alongside a suit I feel it takes a lot of design inspiration from - the Exia (in this case, the rebuilt R2 version):

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB8.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB9.jpg


Today, I converted the suit into Cannon mode for the first time - and posed it alongside my HG Gaddess:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC1.jpg

http://img.photobucket.com/albums/v108/Nerroth/ReornsProjectC2.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC4.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC5.jpg

And a couple of Gaddess pics, if you are interested:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC3.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC6.jpg



When I sit down for Day 3 of the project, I'll work on cleaning up the paint work, covering areas which haven't been covered yet, and getting more of the panel lining done with my Gundam Marker.


Wish me luck.

[astranagun]

http://superrobotwar.files.wordpress.com/2009/10/srwhotnews_pla10_hgucktybox.jpg

[Nerroth]

Oh, by the way - does anyone have a comparison pic of the HG Reborns in Gundam mode alongside the HGUC Hi-Nu?

[cf18]

MG V Gundam ver Ka @ The 49th All Japan Plamodel Hobby Show 2009

http://s153.photobucket.com/albums/s228/eltia/?action=view&current=346660.jpg

Source:
http://www.hobbyfanatics.com/index.php?/topic/25269-the-49th-all-japan-plamodel-hobby-show-2009/
http://hk.myblog.yahoo.com/iam-cybergundam/article?mid=33704

[Vandalier]

Wowwwwwwwww!!!!!!!!!!!!!

Gotta buy it!!!!!!!!!!

[yusawateva]

MG V Gundam ver Ka @ The 49th All Japan Plamodel Hobby Show 2009

http://s153.photobucket.com/albums/s228/eltia/?action=view&current=346660.jpg

Source:
http://www.hobbyfanatics.com/index.php?/topic/25269-the-49th-all-japan-plamodel-hobby-show-2009/
http://hk.myblog.yahoo.com/iam-cybergundam/article?mid=33704

is victory gundam as big as f91 or smaller?

[Rising Dragon]

is victory gundam as big as f91 or smaller?

Actually, Gundam F91 and Victory Gundam are the same size: 15.2 meters in height.

[yusawateva]

Actually, Gundam F91 and Victory Gundam are the same size: 15.2 meters in height.

alright thanks! then i might actually get it, need to see more pictures first though

[MakubeX2]

Rumour :-

MG V Gundam to be out in time for Chirstmas '09.

MG V Gundam ver Ka @ The 49th All Japan Plamodel Hobby Show 2009

http://s153.photobucket.com/albums/s228/eltia/?action=view&current=346660.jpg

Source:
http://www.hobbyfanatics.com/index.php?/topic/25269-the-49th-all-japan-plamodel-hobby-show-2009/
http://hk.myblog.yahoo.com/iam-cybergundam/article?mid=33704

It seems my (insider) source was telling the truth way back on page 732. He did also mentioned a Guncannon ver 2.0 is in the works now.

[yusawateva]

It seems my (insider) source was telling the truth way back on page 732. He did also mentioned a Guncannon ver 2.0 is in the works now.

ya think gun cannon will be out by Christmas?

[MakubeX2]

ya think gun cannon will be out by Christmas?

Nope. I think it's still in the design phase.

[Kelrys]

What is the recommended gold for most of the gold parts in the SD Sangokuden line?

I've been using conventional gold paint marker, but they don't stick so well.

OFF topic: How are the Keroro models nowadays?

[MakubeX2]

What is the recommended gold for most of the gold parts in the SD Sangokuden line?

I've been using conventional gold paint marker, but they don't stick so well.

I've seen kids using poster colours for them. Seem to work well.

[Sworra]

Day 2


Yesterday, I finished the actual build, while chipping away at the paint work.

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB1.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB2.jpg

The beam saber blade in the kit is not coloured - but a coat of clear red paint on it worked a treat!

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB3.jpg

Some more detail:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB4.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB5.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB6.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB7.jpg

A few comparison pics now, with the Reborns Gundam alongside a suit I feel it takes a lot of design inspiration from - the Exia (in this case, the rebuilt R2 version):

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB8.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectB9.jpg


Today, I converted the suit into Cannon mode for the first time - and posed it alongside my HG Gaddess:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC1.jpg

http://img.photobucket.com/albums/v108/Nerroth/ReornsProjectC2.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC4.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC5.jpg

And a couple of Gaddess pics, if you are interested:

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC3.jpg

http://img.photobucket.com/albums/v108/Nerroth/RebornsProjectC6.jpg



When I sit down for Day 3 of the project, I'll work on cleaning up the paint work, covering areas which haven't been covered yet, and getting more of the panel lining done with my Gundam Marker.


Wish me luck.

Great work so far. Keep up the good work. Its starting to come through, can't wait to see the finished product.

[Sworra]

i just decided i've finished my blue frame and posed him with my other astray frames.

as there's no blue frame model (apart from the one that one discontinued a long time ago) i bought a 2nd green frame and painted the damn thing. bought some armored core weapon kits and made them work for blue frame. here's the result:
http://www.grimmreaper.nl/cpg1419/albums/Gallery/models/gunpla/gundam_seed/astray/mbf-p03/normal_DSC04989.JPG (http://www.grimmreaper.nl/cpg1419/thumbnails.php?album=60)
http://www.grimmreaper.nl/cpg1419/albums/Gallery/models/gunpla/gundam_seed/astray/astray%20frames/normal_DSC04996.JPG (http://www.grimmreaper.nl/cpg1419/displayimage.php?album=61&pos=0)
hope you like it (them)

Wow Very nice touches with all your coloured frames its looks like you have a power rangers theme going. haha. I like the Armored core addons you put on the blue frame it is a very clean look. Keep up the good work.

[MakubeX2]

http://img19.imageshack.us/img19/1074/1254972862748.jpg (http://img19.imageshack.us/i/1254972862748.jpg/)

New HGUC lineup, I suppose.

[Nerroth]

Great work so far. Keep up the good work. Its starting to come through, can't wait to see the finished product.

Thanks - and I can't wait either!


Assuming I don't mess it up, that is...

[LightningZERO]

Finally V Gundam huh

And more Trans-AM 00 kits
http://www.toysdaily.com/discuz/thread-110707-1-1.html

[Suika-Esper]

Finally V Gundam huh

And more Trans-AM 00 kits
http://www.toysdaily.com/discuz/thread-110707-1-1.html

I'm assuming Dynames has a different shield to match whatever changes they made on the dvd's. Bandai, you never run out of money-milking tricks, do you? On the other hand, the Masurao is really looking good! I can't wait.

[cf18]

More photos:
http://blog.hobbystock.jp/report/2009/10/tp0233.html
or
http://www.toy-world.com.hk/forum/viewthread.php?tid=19593&page=2#pid109252

MG V Gundam at 3800 yen, Hexa part included.

[Amber.Dawn]

I like the design of the V Gundam, but its size is a turn off for me. I prefer Sinanju-sized Gundams. Or at the very least, Exia-sized.

[Rising Dragon]

I'm liking the color scheme of the new Savior, but if Athrun doesn't watch out, he's going to find himself stuck in the new Blitz. >.>

[CandleStick]

Meh, I'm gonna pass on the V gundam. Here's to hoping that the V2 will come out =D

[Atlantis_Lux]

I'm liking the color scheme of the new Savior, but if Athrun doesn't watch out, he's going to find himself stuck in the new Blitz. >.>


Yeah! And, honestly, I prefer the old color scheme for the Blitz. A stealth unit painted in red is definitely a paradox. :heh:

[MakubeX2]

http://img200.imageshack.us/img200/7733/1254979308487.jpg (http://img200.imageshack.us/i/1254979308487.jpg/)

Heh. Bandai expect those PG OOR owners to pay another 3500 yen for some transparent parts. How greedy could they get.

[cf18]

And more photos
http://www.blog.amiami.com/amiblo/2009/10/49.html

[MakubeX2]

http://img243.imageshack.us/img243/7388/1254984364455.jpg (http://img243.imageshack.us/i/1254984364455.jpg/)

SD Gundam Romance Of Three Kingdom Anime Planned.For the first time in Bandai's History a toyline had sold well enough for them to commission an anime instead of the reverse.

Told people that the SD ROTK line is making lots more cash than OO for Bandai before....

[Rising Dragon]

Yeah! And, honestly, I prefer the old color scheme for the Blitz. A stealth unit painted in red is definitely a paradox. :heh:

I don't think the color scheme really matters when it comes to using Mirage Colloid, since it makes you seemingly transparent, so its not that bad.

[calubin_175]

3800 yen for V Gundam, hmm 3500 yen for the same amount of gimmicks as the Crossbone, 300 yen for the Hexa head. Waiting for V Dash and V2.

Guncannon Ver.2.0, I have a feeling that it is gonna be anime version, perhaps with a lil bit of panel lines like Guntank and Gouf.

[darkstrife]

http://img200.imageshack.us/img200/7733/1254979308487.jpg (http://img200.imageshack.us/i/1254979308487.jpg/)

Heh. Bandai expect those PG OOR owners to pay another 3500 yen for some transparent parts. How greedy could they get.

as if shipping wasnt through the roof already.... for 3500 i could buy another MG kit. but then again this is Bandai, to them 'greedy' isn't part of their vocabulary

on an another note, anyone know of a site which will ship spraypaint internationally? i ordered from HLJ recently and all of a sudden they cancel my shipment cos they 'just' realised that they couldnt send spraypaints... YOU'VE BEING SELLING IT FOR YEARS, HOW THE HECK DO U 'JUST' REALISE??????

[Tormenk]

Sounds like the ban on shipping flammable materials and objects is finally taking effect. I don't spray paint but no topcoats is going to be bad anyway.

[bio9205]

Nice Reborns there! I got down to continuing mine, but broke one of the beam sabers >_> No matter, I'll fix it with some superglue when I get my hands on some.

Another thing: I just painted my Arche's beam sabers today, and tried to pose them with it. Even when I take off the Buster Sword and Shield, the legs can't go far. I know it can't do the 00 split, but the Fang containers are really heavy and weighing down on the legs, so I can't pose the legs too far apart. Any recommendations? Thanks!

[Nightwing(T_T)]

:love::love::love:

http://i36.tinypic.com/23ma0bc.jpg



http://i37.tinypic.com/21ozyg5.jpg



http://i33.tinypic.com/2gt9p3m.jpg



http://i34.tinypic.com/2i1mnat.jpg

Damn now that's how I like it

Edit:
I might get that MG Victory Ver. Ka since I'm also a fan of victory.

[darkstrife]

so now with some actual pics of the PG 00 raiser posted up, what does everyone think?

i'm still not 100% convinced, i need some pics of the runners, inner frame pics and some reviews soon will be nice ^^

[Ardi220288]

well admittedly it looks awesome it give you the feeling of "Power" but yeah still need some review on it ;)

[Nightwing(T_T)]

Box art of PG 00 Raiser

http://i36.tinypic.com/scrivc.jpg


http://i35.tinypic.com/4kz7de.jpg


http://i33.tinypic.com/2hoitzl.jpg


http://i35.tinypic.com/2iu7zp0.jpg

[KaiDamien]

PG 00 looks really awesome.Red looks kind of off for Blitz. Since no one answered i figured i asked one last time
Im curious, in the boxart of 1/100 astray mirage frame . Is the other MS the backside of astray mirage frame

[Alexus_Z3]

:love::love::love:

http://i36.tinypic.com/23ma0bc.jpg



http://i37.tinypic.com/21ozyg5.jpg



http://i33.tinypic.com/2gt9p3m.jpg



http://i34.tinypic.com/2i1mnat.jpg

Damn now that's how I like it


Sweet PG 00 Raiser :love: - I love the leg - :D


Hmm am I the only one thinking that nebula Blitz looks like a lobster? :heh:


http://i34.tinypic.com/24q8u92.jpg

[LoweGear]

Technically that other MS shown is not the back, it's the alternate form of the Mirage Frame, where the head, arms and feet flip around, however it's still facing the front.

[helois]

damn Bandai(maybe the words reapeted a lot in this topic)!!!

00 PG looks beautiful...

i'll wait some years to buy this... XD

[silencer.001]

Ok

Christmas List:

PG 00 Raiser
MG V Gundam

yep, just those 2 will do me this year ^^

do want

[GrahamAker]

hg 00 line is far from over! transarm reborns, masurao/suswanoo, gnz series are yet to come!!!!!!!!!

[KaiDamien]

Technically that other MS shown is not the back, it's the alternate form of the Mirage Frame, where the head, arms and feet flip around, however it's still facing the front.

Ah cool thanks =)

[Amber.Dawn]

Tempted to get the PG now...in addition to Blue Frame, and many more.
My poor wallet...

[Ardi220288]

58 runners.....

http://i36.tinypic.com/vicsg7.jpg

they should've used wider table for this one :heh:

[MakubeX2]

I can still point out certain faults here in regards to the PG OOR sample here :-

1) Why does the panelings seems to be mainly concerntrated on the O Raiser unit now. The OO, in contrast, seems too "clean".

2) Either the legs of the OO is too short or it's arms are too long. In any case, the arm seem to be reaching the knee, making the entire unit too ape-ish instead of humanoid.

3) Look at the circled part below :-

http://img199.imageshack.us/img199/9439/1255014439577.jpg (http://img199.imageshack.us/i/1255014439577.jpg/)

This is what I suppose is a GN Particle Radiator Fin from the anime. And it looks to be too certain to be made up of what can be call one single plastic instead of multiple pieces in which PG is well-known for. Evidence of Bandai scrimping on parts to maximise their profit here.

[Nightwing(T_T)]

http://i37.tinypic.com/j6sa5z.jpg

http://i37.tinypic.com/1znbp7o.jpg

http://i36.tinypic.com/2ngub9x.jpg

http://i38.tinypic.com/331gcgw.jpg

http://i36.tinypic.com/261nv5c.jpg

http://i38.tinypic.com/21mdkci.jpg

http://i34.tinypic.com/2e4c0hy.jpg

http://i36.tinypic.com/1fd30n.jpg

http://i38.tinypic.com/2gu04sz.jpg

http://i33.tinypic.com/2zthfr5.jpg

http://i35.tinypic.com/2mr7kfm.jpg

http://i35.tinypic.com/2yvnupl.jpg

http://i37.tinypic.com/20rr08y.jpg

http://i34.tinypic.com/2hrd3qf.jpg

From ngeekhiong:

- Pelvis joint can swing upwards (is a die cast part I believe)
- Plated parts for the blade of GN Sword II
- Linked component between the shoulder joint and shoulder block can be observed
- Clear part set will be a Bandai Hobby Online Shop limited item. Pre-order period is between September 28th and January 2010. 3,500 Yen (inclusive of tax) I think.

[SonicSP]

Wow,it's beautiful...........

Now if it will only have great articulation and posability and it really will be perfect.

[Rising Dragon]

3) Look at the circled part below :-

http://img199.imageshack.us/img199/9439/1255014439577.jpg (http://img199.imageshack.us/i/1255014439577.jpg/)

This is what I suppose is a GN Particle Radiator Fin from the anime. And it looks to be too certain to be made up of what can be call one single plastic instead of multiple pieces in which PG is well-known for. Evidence of Bandai scrimping on parts to maximise their profit here.

Actually, that's, um, the outer plating of the GN-Shield.

EDIT: Also, through comparing the above picture with the official lineart of the 00 Gundam, the arms and legs look to be quite in proportion. I think its just the angle of the camera that makes it look ape-ish, as depicted in Nightwing's first image.

[SonicSP]

Is he referring to the 0 Raiser's Clevical Antennas's or the GN-Shield?

[Rising Dragon]

Is he referring to the 0 Raiser's Clevical Antennas's or the GN-Shield?

I think Makube mistook the GN-Shield for the 0 Raiser's large Clavicle Antenna.

[GN0010 Nosferatu]

That is absolutely beautiful, I fucking love it. Never will we get a better detailed 00 Raiser.

Are those missile pods by the way? In the 8th picture down.

[darkstrife]

Tempted to get the PG now...in addition to Blue Frame, and many more.
My poor wallet...

i know what ur going thru amber lol, i just recently bought a MG unicorn (yet to build) and i'm also tempted to get the PG 00 AND the MG blue astray. i have the money, but to spend so much on gundam models... i don't know lol

the PG 00 does look super kickass, 58 runners is more than twice a normal MG kit so its quite a lot, for some reason i'm tempted to get the clear parts as it seems that the clear parts have light shades of different colours which will make the model look better rather than if all the clear parts were just plain clear

[Rising Dragon]

That is absolutely beautiful, I fucking love it. Never will we get a better detailed 00 Raiser.

Are those missile pods by the way? In the 8th picture down.

Yes, they are. They can be attache to the 0-Raiser's wing binders and clavicle antennae.

[MakubeX2]

Actually, that's, um, the outer plating of the GN-Shield.

After looking at the rest of the promo pix, you're right.

But my point about Bandai slacking off still stands, I mean you will expect them to add more internal details via more parts instead off just slapping all of them onto one single piece. Especially after what they demand of you in term of monetary terms.

PS :- The more I look at it, the more I think the Perfect Grade is just an experimental platform Bandai is using for their MG and HG line. And people who buy the PG is funding their R&D department.

Now,the point I'm trying to put across here is to expect a MG of the OOR to be better looking than the PG here at a more economical rate as well.

[Aoi Toori]

It's really beautiful, if only that's cheaper I'll definitely buy it.. ><

Uh, maybe I'll ask my girlfriend to buy it for me :heh: lol

[Tormenk]

Eh hollow areas are a thing of HGs, not PGs but whatever. I'm not buying it so no loss to me.

I'm only interested in seeing if the joints for the drives can actually support the Raiser wings now that they pack alot more weight with a solid frame inside.

[GN0010 Nosferatu]

I gotta say, after viewing these pictures, I'm more at ease with the 00 Raiser design. It's really not that bad.

[LordStrike]

wen is that beauty coming out? i wish i had the cash for it

[astranagun]

wen is that beauty coming out? i wish i had the cash for it

It should come out the 28th of november

http://i34.tinypic.com/2hrd3qf.jpg

or the 25th of the same month
http://i38.tinypic.com/2gu04sz.jpg

[Akyra]

Sorry, to get you guys to repeat again, but what's the other first edition goodie?

[Vandalier]

DAMN!!! 28 Nov
so it will be not at AFA 2009 T_T (21-22 nov)

huks, i though i can buy this PG when i come to singapore huhuhuhuhuh

[MakubeX2]

http://img527.imageshack.us/img527/3773/1255090440836.jpg (http://img527.imageshack.us/i/1255090440836.jpg/)

Here's an interesting observation for upon the body armour of the MG V. I knew something has to be sacrifieced for it's complex transformation.

[vbann]

So...how long before we get the inevitable trans am repaint of PG 00 raiser

[CrimsonBlitz]

Might be a while..remember how long it took for a Strike Rouge PG to come out.

But im gonna wait for the V2. Not gonna waste my money on the Victory...But that blue frame is looking nice....

[yusawateva]

ya think delta from unicorn will be out in the rumored unicorn MGs coming out in jan/feb?

[GN0010 Nosferatu]

So the modeling grades goes like this, right?

HG means, High Grade
MG means, Mega Grade
PG means, Perfect Grade.

[kakakka]

MG = Master Grade

[GrimmReaperNL]

there's also:
NG = No (or non) Grade
FG = First Grade
SG = Speed Grade

[Amber.Dawn]

Sorry, to get you guys to repeat again, but what's the other first edition goodie?

You mean for the PG 00?

A stand.

[Alexus_Z3]

http://i37.tinypic.com/j6sa5z.jpg

http://i37.tinypic.com/1znbp7o.jpg

http://i36.tinypic.com/2ngub9x.jpg

http://i38.tinypic.com/331gcgw.jpg

http://i36.tinypic.com/261nv5c.jpg

http://i38.tinypic.com/21mdkci.jpg

http://i34.tinypic.com/2e4c0hy.jpg

http://i36.tinypic.com/1fd30n.jpg

http://i38.tinypic.com/2gu04sz.jpg

http://i33.tinypic.com/2zthfr5.jpg

http://i35.tinypic.com/2mr7kfm.jpg

http://i35.tinypic.com/2yvnupl.jpg

http://i37.tinypic.com/20rr08y.jpg

http://i34.tinypic.com/2hrd3qf.jpg

From ngeekhiong:
Freakin awesome and with 00 Quanta on the way .... no doubt about it :D

[pademon]

does anybody know what the hollow part of the body of the pg 00 is for?

[Tormenk]

ya think delta from unicorn will be out in the rumored unicorn MGs coming out in jan/feb?

Likely. The other MG would probably be the Banshee.

[gummybear]

http://img527.imageshack.us/img527/3773/1255090440836.jpg (http://img527.imageshack.us/i/1255090440836.jpg/)

Here's an interesting observation for upon the body armour of the MG V. I knew something has to be sacrifieced for it's complex transformation.

on the plus side, at least they made something other than the damn first generation gundam all the time, if they would get on it and make Gundam X MG and the damn 1:100 GN ARCHER then I will be even more hapy.

[GrahamAker]

its depends upon the hg 00 series. exia was the one of the best sellers hg series and 00 raiser topped it. so 00 raiser got promoted to pg division while exia got promoted to mg division! i want to see cherudim mg or arios? what do u say guys?

[Nerroth]

I was wondering about a couple of the season 2 suits I haven't picked up yet (in HG), in terms of quality. (There are a couple, like the Arche Gundam, Susanowo, Ahead Smultron and so forth that for one reason or another haven't really grabbed me, in terms of wanting to go and buy/build them.)

How is the HG Susanowo as a kit, to pick one example? (Or the Arche, to pick another?)

[Tormenk]

Arche > Susanowo.

The latter has a number of problems so waiting for the Masurao might be a good idea. The design's been changed to (hopefully?) fix the problems the Susanowo had. Arche has more stickers and requires alittle bit more painting than the Susanowo as well.

[Amber.Dawn]

does anybody know what the hollow part of the body of the pg 00 is for?

PG Exia maybe?

[Sir Dearka]

http://img527.imageshack.us/img527/3773/1255090440836.jpg (http://img527.imageshack.us/i/1255090440836.jpg/)

Here's an interesting observation for upon the body armour of the MG V. I knew something has to be sacrifieced for it's complex transformation.
I still think these are just two separate parts put one on another.

[BioRanger]

PG Exia maybe?

I think that 00 Quanta is more likely.

[Calvin329]

I think that 00 Quanta is more likely.

Yea, now that it's basically confirmed that 00 Quanta has a chest condensor like Exia, I'm assuming they're going to release parts to transform PG 00 Raiser into 00 Quanta.

[Akyra]

Ah, thanks amber....

man I m tempted to buy the PG 00 now!...and I haven't even started by MG destiny, SF and Exia (all special eds) and my PG Red Astray....lol

[Sir Dearka]

At such rate, I fear the next 00 MG would be Gundam 00. At least once they should release all the Mg for the 4 main Gundams. Of course, I find it extremely improbable. Sandrock, Heavyarms, Deathscythe from Wing and Duel or Aegis from SEED... though these were extremely popular series and the characters piloting these were very popular, too and had their own fanbases, they still did not release MGs.

Ahh, Mater Grade Dynames.... where art thou?
http://img.photobucket.com/albums/v234/Armasil/Lockon%20Stratos/DSCF8206.jpg
http://img.photobucket.com/albums/v234/Armasil/Lockon%20Stratos/DSCF8223.jpg

[MakubeX2]

I still think these are just two separate parts put one on another.

Care to share you view about this will facilitate the movement of the waist ?

And....

http://img30.imageshack.us/img30/4143/1255165389327.jpg (http://img30.imageshack.us/i/1255165389327.jpg/)

A jump of 130% increase of sales in the SD ROTK line in just a year. Scary thought in such economical climate and they didn't even export that line into Europe and America. It's just East Asia and Japan now.

[Sir Dearka]

Care to share you view about this will facilitate the movement of the waist ?
Maybe there is a joint between them? Something not shown in this exposition?

[pademon]

Quote:
Originally Posted by BioRanger View Post
I think that 00 Quanta is more likely.
Yea, now that it's basically confirmed that 00 Quanta has a chest condensor like Exia, I'm assuming they're going to release parts to transform PG 00 Raiser into 00 Quanta.
that would be exciting!
anybody here living in east asia? i only have to wait a month to have the PG00 available locally. a month to save money~

[LightningZERO]

Is this posted yet? Boxart for Unicorn series

http://img.photobucket.com/albums/v178/BladeEX/20091009044823-44242.jpg
http://img.photobucket.com/albums/v178/BladeEX/20091009044829-50838.jpg

http://img.photobucket.com/albums/v178/BladeEX/20091009045146-28277.jpg

MG Zaku II Ver 2.0 A Baoa Qu Defense Team Type(December release)
MG G3 Gundam Ver 2.0 (Sample)

[Tak]

A jump of 130% increase of sales in the SD ROTK line in just a year. Scary thought in such economical climate and they didn't even export that line into Europe and America. It's just East Asia and Japan now.

It had always been East Asia and Japan. That part is not surprising, at all. East Asia is Japan's biggest export market for pop culture goods. The Western market is but a fraction of that.

Especially when it comes to RoTK. Oh, and what is this I am looking, it will be animated? :heh:

- Tak

[gummybear]

MG G3 Gundam Ver 2.0

REALLY?! there been 3 different RX version 2.0 out already, how many more do we need?! Even for a old fan of RX, I am already sick of the RX milking, let it die and move on to other Gundams and that is also not Turn A

[MakubeX2]

It had always been East Asia and Japan. That part is not surprising, at all. East Asia is Japan's biggest export market for pop culture goods. The Western market is but a fraction of that.

Especially when it comes to RoTK. Oh, and what is this I am looking, it will be animated? :heh:

Or rather in this scenarior, ROTK is a well known masterpiece throughout East Asia that is read by the Chinese, Korean, Japanese and even the Vietnamese.

This particular SD line is just a perfect blend of Old-Meet-New combination where you have an old classic marrying a new pop culture accessible almost by all. Those unfamiliar with Gundam will at least know who the ROTK characters are and will be enticed by the design to pick up a kit or 2 especially with the cheap pricing.

[Critias]

At such rate, I fear the next 00 MG would be Gundam 00. At least once they should release all the Mg for the 4 main Gundams. Of course, I find it extremely improbable. Sandrock, Heavyarms, Deathscythe from Wing and Duel or Aegis from SEED... though these were extremely popular series and the characters piloting these were very popular, too and had their own fanbases, they still did not release MGs.
[/SPOILER]


Hey there's always hope. Look at Infinite Justice; it got the MG treatment, and the Justices have always been second to the Freedoms. But (arguing with myself), if you're ever gonna see something other than Setsuna's Gundams becomes MGs, then they're gonna have to suddenly become AS popular as the mains, or do something so stupidly godly in the movie. :D

[yusawateva]

does the MG MK-II Gundam HD Color come with the display base??

[vektar]

does the MG MK-II Gundam HD Color come with the display base??

it does not, i was really disapointed when i got my HD MkII because of the lack of action base.

[Nerroth]

Arche > Susanowo.

The latter has a number of problems so waiting for the Masurao might be a good idea. The design's been changed to (hopefully?) fix the problems the Susanowo had. Arche has more stickers and requires alittle bit more painting than the Susanowo as well.

What kind of problems are you referring to, regarding the Susanowo?

[bio9205]

What kind of problems are you referring to, regarding the Susanowo?

1) Lack of open hands for the ever-awesome cross hand pose. Masurao has them.
2) Side binders connected to main body with a very loose poly cap piece. Drops out often.

That said, Susanowo has its good points as well, like the inclusion of the blue wire, the Flag face (albeit unpainted) and most importantly, it requires minimal painting. Just requires 3 stickers.

And I wouldn't say Arche is better. I own both, and they have their own share of flaws.

[Mister Mister]

REALLY?! there been 3 different RX version 2.0 out already, how many more do we need?! Even for a old fan of RX, I am already sick of the RX milking, let it die and move on to other Gundams and that is also not Turn A

I personally would prefer if they used the 2.0 frame as a basis for 2.0s of Alex or the GP-01.

[Nerroth]

1) Lack of open hands for the ever-awesome cross hand pose. Masurao has them.
2) Side binders connected to main body with a very loose poly cap piece. Drops out often.

That said, Susanowo has its good points as well, like the inclusion of the blue wire, the Flag face (albeit unpainted) and most importantly, it requires minimal painting. Just requires 3 stickers.

And I wouldn't say Arche is better. I own both, and they have their own share of flaws.

Hmm. What's the issue with the Arche, then?

(For comparison's sake, how is the Arche kit compared to the HG Throne Zwei?)

[randus]

Hmm. What's the issue with the Arche, then?

(For comparison's sake, how is the Arche kit compared to the HG Throne Zwei?)
A bit more articulation at the shoulders and waist as compared to the Thrones. The legs can split a bit further but not much change for the legs. >.>

EDIT:
Issues? Well, the arm will sag after a while holding the buster sword and the legs can't do the 00 split which it really need for the feet sabers to be more dynamic to pose. Yep.

[ashtaron]

I recently stumbled across the site,
http://tatsuhobby.com/webstore/index.php?main_page=product_info&cPath=1_23&products_id=146&zenid=rs4mdlq79515dju8ihl72rhcg2.

On it, it claims the upcoming MG Astray Blue Frame comes with 4 connector parts that allow the MG Astray to attach the backpacks from the 1/100 HG VS Astray kits. Are the connector parts only exclusive to the Limited First Edition?

[GNWeapon]

Anybody who owns a HG 1/144 00 Gundam ever modded the GN Drive cone's verniers/particle emitters? (The kit comes with the cones molded with empty gaps.)

I just bought this:
http://www.hlj.com/product/WAVOP-351

I saw this in 1 of the pages of HobbyJapan Oct 2009 issue, they used it for the verniers/emitters.

If you ever done so to your 00 Gundam, would you recommend some tips on how you did it? Thanks. :)

[GrahamAker]

my reborns gundam is comin!!!!

[MakubeX2]

http://img194.imageshack.us/img194/1973/1255288467855.jpg (http://img194.imageshack.us/i/1255288467855.jpg/)

They don't make 'em like they use to. No matter articulation or detail wise.

[yusawateva]

MG Stark Jegan in march
from ngee khiong

[Amber.Dawn]

MG Stark Jegan in march
from ngee khiong

/wets self

Booyah! The very first Gundam I got (SD, long ago) is gonna come out.

[Amber.Dawn]

They don't make 'em like they use to. No matter articulation or detail wise.

Hmm, looks like the Strike is still one of the best detail and articulation wise.
Will have to wait for reviews...

[MakubeX2]

Hmm, looks like the Strike is still one of the best detail and articulation wise.
Will have to wait for reviews...

In defence of the PG OO, I will say the hampering of it's articulation is cause by the GN Condensener on the elbow and knee. If we are to remove those....

But there's no excuse to the lack of mechanical details, are they ? However, I just somewhat might forgive Bandai for slacking off if those Condenser is removable to show some inner details like how it's possible for the SD Exia and SD O.....

PS :- Anyone having 2nd thoughts about buying the PG OO now ?

[Tormenk]

I'm wondering if that's the complete inner frame of the 00.. not too flattering if the PG version still has to reply on armor pieces to bridge articulation points or other frame parts. Especially the upper arm and upper torso areas.

[X207]

Wouldn't that give you clear purple in the end? Tamiya's clear colors get darker with more coats so a light blue would be one or two coats at best. Otherwise you can source around for markers or highlighters for the light blue.


thanks, i guess i'll need to put a few layers of that on the parts then.

[calubin_175]

MG Stark Jegan in march
from ngee khiong

Nah, I think it refers to the HGUC release. The most probable candidate for the MGs is the Delta Plus, given that it was favoured in the UC modelization polls before. Banshee is very likely as well, but I wonder whether they're gonna fix up some minor engineering and then apply it into subsequent production runs of the normal Unicorn, much like what happend to the joints of the Z gok and Mk-II Ver.2.

[SonicSP]

http://superrobotwar.files.wordpress.com/2009/09/srwhotnews_hg00rs3box.jpg

HG 00 Raiser+GN Sword III boxart.



Awesome,cannot wait to get this..........And add this box to my collection of 00 boxes.hehehe,wont be long now.....

And finally a 00 boxart featuring 00 as the main attraction is WITH its signature blue particles.Previously such boxarts are only limited to 00 using normal green particles,the closest thign before this one would be the HG 0 Raiser set.

At least the manual instruction have cool official 00 Raiser poses this time around.HG Trans-Am Raiser poses were okay I guess but HG 00 Raiser Deisgner Color were not so good.


And I guess the official GN Sword III would look better than my painted one from HG Trans-Am Raiser kit,and would match perfectly with my HG 00.Been looking forward to this for awhile now.

[bio9205]

Does anyone know where to get a HCM-Pro Kyrios in Singapore, and how much it costs?

[LynnieS]

In defence of the PG OO, I will say the hampering of it's articulation is cause by the GN Condensener on the elbow and knee. If we are to remove those....

PS :- Anyone having 2nd thoughts about buying the PG OO now ? It does look like the PG 00 can't bend its knees as far as the PG Strike, but how did you tell how articulated are the 00's fingers from the photo? :confused: Amazon Japan is offering a 37% discount on the PG 00 kit now, though, which with free shipping, looks to be a darn good deal.

[Namihana]

http://superrobotwar.files.wordpress.com/2009/09/srwhotnews_hg00rs3box.jpg

HG 00 Raiser+GN Sword III boxart.



Awesome,cannot wait to get this..........And add this box to my collection of 00 boxes.hehehe,wont be long now.....

And finally a 00 boxart featuring 00 as the main attraction is WITH its signature blue particles.Previously such boxarts are only limited to 00 using normal green particles,the closest thign before this one would be the HG 0 Raiser set.

At least the manual instruction have cool official 00 Raiser poses this time around.HG Trans-Am Raiser poses were okay I guess but HG 00 Raiser Deisgner Color were not so good.


And I guess the official GN Sword III would look better than my painted one from HG Trans-Am Raiser kit,and would match perfectly with my HG 00.Been looking forward to this for awhile now.

That is INDEED a sexy boxart for the 00 Raiser. Will it also include the GN Sword II's? Just wondering because if it did, I'll sell my regular 00 and buy this one.

[LoweGear]

That is INDEED a sexy boxart for the 00 Raiser. Will it also include the GN Sword II's? Just wondering because if it did, I'll sell my regular 00 and buy this one.

It includes the GN Sword II's by default, since the parts for them are integrated into the main body runners. This version will also include the beam blades for the GN Sword II's.

[Namihana]

It includes the GN Sword II's by default, since the parts for them are integrated into the main body runners. This version will also include the beam blades for the GN Sword II's.

That's very good to know! Then I'm definitely buying this when it comes out.

And I should start saving up for the GNHW versions of the Arios, Cherudim and Seravee too.

[SonicSP]

^^ 00 Raiser+GN Sword III should be the definitive complete set for HG 00 when it comes out.I mean HG Trans-Am Raiser already hold that role,just in Trans-Am colors,which could be a turn off if you you just want regular 00.


http://bandai-hobby.net/gundam00/product/hg/00raiser_gnsword3.html

Anyway,the official webpage for the kit I think,contains some of the official poses,I only see poses for GN Sword III though.I guess they really want to emphasize on that.

Also,if you click through the picture and get to the slideshow,you can see that GN Sword III 's beam saber mode is called Raiser Sword III.I'm guessing that's the name for the Raiser Sword when used with the GN Sword III now.

[GNWeapon]

So nobody here has modded their HG 00 Gundam's GN Drive for the emitters then..
Got a question though, who here is able to read/translate Japanese to English? If you got HJ Oct 09 issue that would be great as I have no scanner here, and am looking for some help with a couple of short paragraphs.

Thanks.

[GrahamAker]

^^ 00 Raiser+GN Sword III should be the definitive complete set for HG 00 when it comes out.I mean HG Trans-Am Raiser already hold that role,just in Trans-Am colors,which could be a turn off if you you just want regular 00.


http://bandai-hobby.net/gundam00/product/hg/00raiser_gnsword3.html

Anyway,the official webpage for the kit I think,contains some of the official poses,I only see poses for GN Sword III though.I guess they really want to emphasize on that.

Also,if you click through the picture and get to the slideshow,you can see that GN Sword III 's beam saber mode is called Raiser Sword III.I'm guessing that's the name for the Raiser Sword when used with the GN Sword III now.

hg 00 is better , u get to collect all the ms with different variety for less cost:)

[SonicSP]

hg 00 is better , u get to collect all the ms with different variety for less cost:)

If you want to get the full set of 00 Gundam,your better off buying the HG 00 Raiser+GN Sword III.You cannot get the full set of everything without getting at least HG 00 Raiser +GN Sword III or at least a HG Trans-Am Raiser kit [And only in trans-Am too],as the GN Sword III, Raiser Sword III and GN sword II beam sabers are only within these sets.

Basically thye're both complete sets,just with different colors.

[Haladflire65]

Question: Do they only make PGs of Exia and the 00 Gundam? I'd love versions of Dynames or Kyrios, but it looks to me that they're being rather sadly neglected.

[Dynamite]

Hello. New user here. Joined this forum just for the Gundam/Gunpla talk, since this is the first thing that came up when I Googled "Gundam model forum".

I'm still looking for a pure Gundam modeling forum, or at least a Gundam forum that has a subforum just for Gunpla, but I haven't found an active one.

Kind sad that the most active Gunpla forum I've found is a thread in a subforum...

So if anybody can point me in the direction of an active Gunpla forum that has a good mix of both modders and collectors, that would be great.

[vektar]

http://img194.imageshack.us/img194/1973/1255288467855.jpg (http://img194.imageshack.us/i/1255288467855.jpg/)

They don't make 'em like they use to. No matter articulation or detail wise.

I dont think thats 100% accurate on the articulation, it seems the person has it all bent funny and in unnecessary ways like the right foot. and the table top isn't even.

[ashtaron]

With the recent release of the model kits from the VS Astray series, what is the likelyhood of a Sword Calamity?

[MakubeX2]

It does look like the PG 00 can't bend its knees as far as the PG Strike, but how did you tell how articulated are the 00's fingers from the photo? :confused:

I didn't mentioned anything about the fingers, did I ?

Amazon Japan is offering a 37% discount on the PG 00 kit now, though, which with free shipping, looks to be a darn good deal.

For huge discounts such as this example, I'm sure the PG OO will be worth it. But I'll not pay the full price Bandai demanded.

I dont think thats 100% accurate on the articulation, it seems the person has it all bent funny and in unnecessary ways like the right foot. and the table top isn't even.

No, you can clearly see a piece of armour on the back of the left knee getting in the way. That is a part of the Condenser, hence I make mention that if the Condenser is removable.....

[Critias]

With the recent release of the model kits from the VS Astray series, what is the likelyhood of a Sword Calamity?

Probably the same as the likelihood of the original Calamity getting a 1/100 model kit. The only reason for that is because the VS Astray models are rehashes of previously released kits. Calamity, or any other of the original trio, have yet to get 1/100 at all. But still, I'd be up for seeing the 1/100s of the three (if it ever happens). :D

[LynnieS]

I didn't mentioned anything about the fingers, did I ? I agree with vektar, and think the pose done by whoever did the PG 00 kit is awkward; I would even make it "awkward as hell" instead. :) It's like a [close] opposite of a Bandai PR photo to make people want to buy the kit.

Judging from that 00 photo, it looks like the model is being twisted at the waist to its right, its lower part of the right leg shifted to the left more than the Strike's, and its crotch pushed out - although I can't tell if that is because the 00 is being pushed down and forward. (I'm assuming that (1) the photo's perspective is not weird and (2) the photographer knows what he is doing and not just taking photos at a con. :))

If that's the case, the 00's overall articulation looks decent (even though I'll still wait for a candid review by, say, Dalong first) if not great. That's why I asked about the fingers since the Strike's fingers' articulations were great and can be posed in that "V for victory" shot.

For huge discounts such as this example, I'm sure the PG OO will be worth it. But I'll not pay the full price Bandai demanded. Bandai doesn't do a lot of marketing for the overseas market, does it? :confused: And shops like HLJ do not give discounts till they want to clear out their stock, which is too bad, IMHO.

I haven't seen a thorough review about the PG 00 kit out yet to say if it is worth the full MSRP, to be honest. In terms of discounts, damn near everything is offered at a discount when it first comes out since shops want the stuff out the door. The PG Strike and MG Nu kits were discounted in the same way if I remember right.

[X207]

does the exia r2 repair gn sword III fit the 00 gundam. i got the normal 00 gundam with sword II. i would like to get the gn sword III but i think its only availble to 00 raiser gn swIII and exia repair. if it will fit from exia repair i might consider getting that model too, it was really tempting to buy when i saw the kit.

[GrahamAker]

does the exia r2 repair gn sword III fit the 00 gundam. i got the normal 00 gundam with sword II. i would like to get the gn sword III but i think its only availble to 00 raiser gn swIII and exia repair. if it will fit from exia repair i might consider getting that model too, it was really tempting to buy when i saw the kit.

it might fit probably , but gn sword kai and gn sword III are 2 different things!:)

[SonicSP]

does the exia r2 repair gn sword III fit the 00 gundam. i got the normal 00 gundam with sword II. i would like to get the gn sword III but i think its only availble to 00 raiser gn swIII and exia repair. if it will fit from exia repair i might consider getting that model too, it was really tempting to buy when i saw the kit.

If you want the complete complete HG 00 Gundam set,wait for the HG 00 Raiser+GN Sword III kit. [Man,that's a long name to type,I'm not going to ge tused to it].The HG Trans-Am Raiser kit also provides the same set of equipment,just in Trans-Am colors.

The only way for you to get the GN Sword III is to but the upcoming kit that will be released in less than a week.If you do not have 0 Raiser,the kit will also give the GN Shield,The GN Sword Staff Connector.And in addition the GN Sword II Beam Sabers.The alternative is to get the Trans-Am Raiser version,which is the exact same kit but in Trans-Am.

The Exia R2's GN Sword Kai is a totally different sword.It's based on the original GN Sword in physical design mostly and is grey in color with green edges while the GN Sword III is white with green edge.The Gn Sword Kai does not have a beam sword wither,which the GN Sword III does.

I havent tried to see whether they fit,but I'm guessing it does not fit perfectly.It will be probably be the same as trying to put the original GN Sword on 00.

If you already own HG Exia,your basically buying another one that is mostly similar anyways,so either way you going to be re-buying a kit.

IF you feel bad about buying another 00,well......Bandai played their cards well.I've already own 5 HG 00s,going to be 6 with the upcoming kit.I guess I love the 00 Gundam/Raiser that much.

At least I didnt have to bother with the lackluster 1/100.

[bio9205]

Does anyone know where to get a MS In Action Kyrios in Singapore, and how much it costs?

Anyone? :confused:

[GrahamAker]

for graham aker and gn flag/ masurao fans

http://www.modelers-g.jp/uploads/photos/2079-2.jpg
http://www.modelers-g.jp/uploads/photos/2079-3.jpg
http://www.modelers-g.jp/uploads/photos/2079-4.jpg
http://www.modelers-g.jp/uploads/photos/2079-5.jpg
http://www.modelers-g.jp/uploads/photos/2079-6.jpg
http://www.modelers-g.jp/uploads/photos/2079-7.jpg

nice customization

[GNWeapon]

Does anyone know where to get a MS In Action Kyrios in Singapore, and how much it costs?

Anyone? :confused:

You can check with TFH.

[X207]

it might fit probably , but gn sword kai and gn sword III are 2 different things!:)

If you want the complete complete HG 00 Gundam set,wait for the HG 00 Raiser+GN Sword III kit. [Man,that's a long name to type,I'm not going to ge tused to it].The HG Trans-Am Raiser kit also provides the same set of equipment,just in Trans-Am colors.

The only way for you to get the GN Sword III is to but the upcoming kit that will be released in less than a week.If you do not have 0 Raiser,the kit will also give the GN Shield,The GN Sword Staff Connector.And in addition the GN Sword II Beam Sabers.The alternative is to get the Trans-Am Raiser version,which is the exact same kit but in Trans-Am.

The Exia R2's GN Sword Kai is a totally different sword.It's based on the original GN Sword in physical design mostly and is grey in color with green edges while the GN Sword III is white with green edge.The Gn Sword Kai does not have a beam sword wither,which the GN Sword III does.

I havent tried to see whether they fit,but I'm guessing it does not fit perfectly.It will be probably be the same as trying to put the original GN Sword on 00.

If you already own HG Exia,your basically buying another one that is mostly similar anyways,so either way you going to be re-buying a kit.

IF you feel bad about buying another 00,well......Bandai played their cards well.I've already own 5 HG 00s,going to be 6 with the upcoming kit.I guess I love the 00 Gundam/Raiser that much.

At least I didnt have to bother with the lackluster 1/100.

thanks for the information sonic and bhus12. atm i only have got the 144 00 gundam and 144 0 raiser separately. if anything id probably buy the r2 repair as i dont have any exia atm. if the r2 gnIII is too lose then i can probably figure out a way to make it a better fit on my 00.

btw are there many obscure models out there? ie those featured in manga only or small gundam ova like green frame astray or the variation MS in stargazer. i did see a green frame astray at one of the model shop that sells gunpla here.

[SonicSP]

thanks for the information sonic and bhus12. atm i only have got the 144 00 gundam and 144 0 raiser separately. if anything id probably buy the r2 repair as i dont have any exia atm. if the r2 gnIII is too lose then i can probably figure out a way to make it a better fit on my 00.



Its not both the GN-Sword III,they're actually different.R2's is called GN Sword Kai and is really different from 00's physically.Its almost the same as normal Exia's GN Sword.

But if your willing to have to use that as a substitute than go ahead than.It would be a good buy if you do not have HG Exia already but if you do,than the new 00 Raiser kit would give you the GN Sword II/III beam sabers at least.

[GN0010 Nosferatu]

for graham aker and gn flag/ masurao fans

http://www.modelers-g.jp/uploads/photos/2079-2.jpg
http://www.modelers-g.jp/uploads/photos/2079-3.jpg
http://www.modelers-g.jp/uploads/photos/2079-4.jpg
http://www.modelers-g.jp/uploads/photos/2079-5.jpg
http://www.modelers-g.jp/uploads/photos/2079-6.jpg
http://www.modelers-g.jp/uploads/photos/2079-7.jpg

nice customization

Look, it's the Ekisubo!:heh:

Very nice custom by the way, that is what a mass production GN Flag should look like.

[bio9205]

You can check with TFH.

TFH? What's that? :heh:

Anyway, don't try fitting R2's GN Sword III on 00. Firstly, it doesn't fit, secondly, it looks terrible, trust me. It doesn't go with 00's design.

[X207]

TFH? What's that? :heh:

Anyway, don't try fitting R2's GN Sword III on 00. Firstly, it doesn't fit, secondly, it looks terrible, trust me. It doesn't go with 00's design.

thanks for the info, i was afraid that it wouldnt turn out too good.

Its not both the GN-Sword III,they're actually different.R2's is called GN Sword Kai and is really different from 00's physically.Its almost the same as normal Exia's GN Sword.

But if your willing to have to use that as a substitute than go ahead than.It would be a good buy if you do not have HG Exia already but if you do,than the new 00 Raiser kit would give you the GN Sword II/III beam sabers at least.

im getting tempted to buy the r2 repair again, though for the reason to get an exia. unfortunately im not enough of a gundam nut to get two of the same model to get a single sword. gn sword II will have to do for my 00 gundam. the only time i would consider getting a second model of a MS is for the purpose to give it a custom paint job.

[SonicSP]

Since you dont have the original Exia,then I suggest you get the R2 then......and maybe try to see if the GN Sword Kai fits a bit.

It wont look nice but at least you will have Exia regardless.

R2 does not come with beam sabers except for that white plastic connected to the hilt,so if your expecting to get some attach clear pink sabers that will fit 00's hilt,be forwarned that your not going to get any.Just a warning,in case you were expecting any since the 00 Gundam and 0 Raiser HG does did come with them.

[Exia_00]

the gn sword kai wont be stable when held by 00 because it can't "clip" to the forearm of 00 the GN sword III clips on that groove where u can mount the shields on the bottom of its forearm where as the exia's clips on the groove on top, even if you remove that part, the handle for exia's gn sword doesnt take up all the space inside the hand which will cause it to wiggle around/

[GNWeapon]

TFH? What's that? :heh:

Anyway, don't try fitting R2's GN Sword III on 00. Firstly, it doesn't fit, secondly, it looks terrible, trust me. It doesn't go with 00's design.

The Falcon's Hangar.
www.tfh.com.sg

They can help bring in any japanese merchandise, and I do recall seeing MSiAs there.
Which is also where I get my HG 1/144 kits from, JPN retail price converted to SGD directly.

[GN0010 Nosferatu]

Am the only one who thinks that GN Flag is godsend?

Look at it...it's perfect.

[X207]

thank you everyone for the info on 00 and R2 exia. i'll have to wait for another r2 to come to a store near me. the only model that i have with clear beam saber atm is 144 gaia gundam, its design doesnt fit 00 but it fits in 00 hands so it wont be too bad in the end if i want that effect. btw are there any drill bits smaller than 1/16? my 144 blitz gundam has no option for clear beam sabers but a slightlly smaller drill and gaia's clear saber should do the trick. the gunpla shop i go to probably still has a 144 0 gundam ACD that hasnt been sold yet. im probably going to get it tomorrow. does it include the WOL effect?

[DV04]

for graham aker and gn flag/ masurao fans

http://www.modelers-g.jp/uploads/photos/2079-2.jpg
http://www.modelers-g.jp/uploads/photos/2079-3.jpg
http://www.modelers-g.jp/uploads/photos/2079-4.jpg
http://www.modelers-g.jp/uploads/photos/2079-5.jpg
http://www.modelers-g.jp/uploads/photos/2079-6.jpg
http://www.modelers-g.jp/uploads/photos/2079-7.jpg

nice customization

They should have that in the 00 movie...

[GN0010 Nosferatu]

I don't see how a MP GN Flag could look any different. I mean...look at it. Everything about that design comes together PERFECTLY .

[Exia_00]

thank you everyone for the info on 00 and R2 exia. i'll have to wait for another r2 to come to a store near me. the only model that i have with clear beam saber atm is 144 gaia gundam, its design doesnt fit 00 but it fits in 00 hands so it wont be too bad in the end if i want that effect. btw are there any drill bits smaller than 1/16? my 144 blitz gundam has no option for clear beam sabers but a slightlly smaller drill and gaia's clear saber should do the trick. the gunpla shop i go to probably still has a 144 0 gundam ACD that hasnt been sold yet. im probably going to get it tomorrow. does it include the WOL effect?

0 gundam acd doesnt have the WOL

[X207]

0 gundam acd doesnt have the WOL

ty, which model received it then?

[Calvin329]

ty, which model received it then?

O Gundam Original Colour (the grey one)

[GNWeapon]

Anyone here experienced in using pla-plates and/or putty? Could use a PM to me, I got some questions which require your expertise.

Help appreciated of all levels, thank you!!!

[X207]

O Gundam Original Colour (the grey one)

ty, looks like thats the one i'll try to get. is there any difference between the original and the acd version asides from GN condenser and colour scheme?

[Exia_00]

ty, looks like thats the one i'll try to get. is there any difference between the original and the acd version asides from GN condenser and colour scheme?

u named them

[GNWeapon]

ty, looks like thats the one i'll try to get. is there any difference between the original and the acd version asides from GN condenser and colour scheme?

Allow me to help you with that. Courtesy to dalong.net for the following links:

Manual of HG 0 Gundam [ACD Type]:
http://dalong.net/review/00/0h45/p/0h45_m0005.JPG

Manual of HG 0 Gundam:
http://dalong.net/review/00/0h52/p/0h52_m0005.JPG

Note: The difference in what parts are provided/not provided should tell the difference. :)

[bio9205]

The Falcon's Hangar.
www.tfh.com.sg

They can help bring in any japanese merchandise, and I do recall seeing MSiAs there.
Which is also where I get my HG 1/144 kits from, JPN retail price converted to SGD directly.

Thanks! I'll check it out.

[kakakka]

ty, looks like thats the one i'll try to get. is there any difference between the original and the acd version asides from GN condenser and colour scheme?

Aside from those...

No beam saber part for the original colour. So if you want it to have pose with a beam saber, you need to borrow the (pink/red) beam part from other models.

But I think it's no big of deal.

[GrahamAker]

leaving apart mg.pg grades out of the following which is the best?
a)hg 1/144
b)ng 1/100
3)hcm 1/200

[X207]

u named them

looks like CB never really had big plans for upgrading a 1st gen model.

Allow me to help you with that. Courtesy to dalong.net for the following links:

Manual of HG 0 Gundam [ACD Type]:
http://dalong.net/review/00/0h45/p/0h45_m0005.JPG

Manual of HG 0 Gundam:
http://dalong.net/review/00/0h52/p/0h52_m0005.JPG

Note: The difference in what parts are provided/not provided should tell the difference. :)

thank you, the specific links didnt work for some reason but i got to the right section to find the pics. im torn between which one to get, relatively boring colours w/o WOL and sabers or repainted without WOL.

[Rising Dragon]

Yeah, most military organizations usually just build a new model, rather than updating and upgrading one that's 20 years old.

[X207]

do the 0 gundam ACD sabers fit the 00 gundam? if so i'll skip out on WOL so it might supplement my 00 gundam.

[Namihana]

leaving apart mg.pg grades out of the following which is the best?
a)hg 1/144
b)ng 1/100
3)hcm 1/200

HG no doubt. TBH, everytime a new HG comes out, it's ALMOST like an MG. Just look at the Reborns Gundam. That knee joint surprised me.

[SonicSP]

HG no doubt. TBH, everytime a new HG comes out, it's ALMOST like an MG. Just look at the Reborns Gundam. That knee joint surprised me.

Are you referring to the quality of the AD HGs?

[Namihana]

Are you referring to the quality of the AD HGs?

AD as in Anno Domini right? If so, then yes.

The level of detail and articulation on AD HG's(especially the recent ones) just screams MG. Well, almost. I mean, HG's a few years back didn't even have abdomen articulation.

[GrahamAker]

thank for ur honest opinion guys !! how wants to see remodeled arios with beam shield and new stuff?

[GN0010 Nosferatu]

Wait, you made that GN Flag?

[kakakka]

do the 0 gundam ACD sabers fit the 00 gundam? if so i'll skip out on WOL so it might supplement my 00 gundam.

Not really fits. 0 Gundam ACD's sabers are flat, not round that can fit into 00 Gundam's saber handles.

[bio9205]

The Falcon's Hangar.
www.tfh.com.sg

They can help bring in any japanese merchandise, and I do recall seeing MSiAs there.
Which is also where I get my HG 1/144 kits from, JPN retail price converted to SGD directly.

I checked with them, and they didn't have it :heh: Thanks anyway.

Oh, and what do you mean by "help bring in"?

[GrahamAker]

Wait, you made that GN Flag?

nope friend of mine made it. i will post my arios in few days:)

[LightningZERO]

http://www.1999.co.jp/eng/10097667

00 Raiser + GN Sword III is out

[GN0010 Nosferatu]

nope friend of mine made it. i will post my arios in few days:)

You should tell him to make a mass production Gadessa.:p

[Namihana]

http://www.1999.co.jp/eng/10097667

00 Raiser + GN Sword III is out

Sweetness!

Looks like I'm selling off my old 00 model for this. Or...buy this, take the GN Sword III and sell whatever was left, but keep the box. xD

[GrahamAker]

You should tell him to make a mass production Gadessa.:p

lets see he has made many so if he has i will post it:D
mg exia r2
http://www.modelers-g.jp/uploads/photos/1723-2.jpg
http://www.modelers-g.jp/uploads/photos/1723-3.jpg
http://www.modelers-g.jp/uploads/photos/1723-4.jpg
http://www.modelers-g.jp/uploads/photos/1723-5.jpg
http://www.modelers-g.jp/uploads/photos/1723-6.jpg
http://www.modelers-g.jp/uploads/photos/1723-7.jpg

[Namihana]

^

That is just BEAUTIFUL!!

A custom MG Exia beautifully made to resemble the R2! The placement of the decals on the left thigh, not to mention it being covered up. The rear thrusters on the back of the waist and shoulders, the extra beam sword attachment on the left arm, and the green swords!! The freakin' green swords!! R2 can come slice me up anytime with those!

HOT DEYUM!!

[GN0010 Nosferatu]

Who is this person you know bhus12?

Question though...why would the Exia need a big ass beam blade like that? Is that weapon based on anything?

[GrahamAker]

Who is this person you know bhus12?

Question though...why would the Exia need a big ass beam blade like that? Is that weapon based on anything?

this mg exia is not mine,whenever i will display my gunpla here it will be have my mark on the pics. Exia has that new sword to combat new MS like garzzo/masurao etc:):cool:

[GN0010 Nosferatu]

Well, what other artwork has your friend done? Does he have a webpage? I'm interested in seeing more of his kit customs.

[Namihana]

Well, what other artwork has your friend done? Does he have a webpage? I'm interested in seeing more of his kit customs.

Seconded!

Sexy customs like these deserve to be noticed, especially by the Gundam modellers/fanatics community, one being me. I just really appreciate it when someone takes the time and customize a figure to their own liking.

Very respectable IMO.

[GN0010 Nosferatu]

Seconded!

Sexy customs like these deserve to be noticed, especially by the Gundam modellers/fanatics community, one being me. I just really appreciate it when someone takes the time and customize a figure to their own liking.

Very respectable IMO.

I've actually one a few mods on my MSIA figures, if anyone wants to see em, let me know.

[GrahamAker]

I've actually one a few mods on my MSIA figures, if anyone wants to see em, let me know.

put them on bub, however they look it doesn matter!:)

[Un1ver5e]

I've actually one a few mods on my MSIA figures, if anyone wants to see em, let me know.

Do share. :D I personally find it more difficult to mod MsiA/Damashi figures because their hard plastic parts are difficult to saw through. Here's my one and only Damashi mod. (I think some might have seen it before)

http://farm3.static.flickr.com/2465/3658424257_18d5755758_o.jpg

I'm still thinking which to use my WarGreymon on. :heh:

[Namihana]

^ xD

That, that is a beautiful mod as well!

00mni Gundam!!

[bio9205]

Am I the only one here who builds his kits right out of the box with only panel lining? xD

[X207]

Not really fits. 0 Gundam ACD's sabers are flat, not round that can fit into 00 Gundam's saber handles.

thanks, so its still choice between the 2 0 gundam versions.

[MakubeX2]

http://img508.imageshack.us/img508/9113/1255693876689.jpg (http://img508.imageshack.us/i/1255693876689.jpg/)
A rough gauge of the Kshatriya's Box size.

http://img200.imageshack.us/img200/4483/dscf7659n.jpg (http://img200.imageshack.us/i/dscf7659n.jpg/)
And the size of the completed model.

My purchase will only be arriving in about a week or so though.