|
|
Link #2 |
|
30 Seconds to Sawa
AuthorJoin Date: Oct 2007
Location: Philippines
Age: 36
|
Is your monitor new or old?
I've seen some examples of this problem: If it's a CRT monitor and it's also old (including surplus or refurbished monitors), there could be a problem with the VGA plug/socket (loose or bent pins) or the picture tube itself. Banging the side of the monitor as a temporary measure to clear up the "redness" is not recommended, as it could further damage the monitor. Although it's possible to have a television/monitor technician to correct severe cases of this problem, it's better to replace the monitor with a new one (quality 17" CRTs are now affordable).
__________________
Last edited by sa547; 2009-03-18 at 03:47. |
|
|
|
|
|
Link #5 | ||
|
Just call me Ojisan
AnimeSuki Site StaffJoin Date: Jan 2003
Location: U.K. Hampshire
|
Quote:
Quote:
One thing you will need to determine is if the problem is with the monitor or your PC. After making sure the plugs and sockets are not damaged (for example, with a bent pin), then you will need to try the monitor with a different PC and the PC with a different monitor. If the fault is with the monitor (and not just a dodgy pin or connection) then there is little chance of fixing it. Replacement may be the best option, very often the cost of having it fixed isn't worth it and there is a good chance it can't be fixed anyway. Even the cost of the taking it to a repair shop isn't worth it. If the fault lies within your PC, then you will need to replace the video card (if the video is built into the motherboard then you will need a new video card most likely). |
||
|
|
|
![]() |
| Thread Tools | |
|
|