AnimeSuki Forums

Rising Dragon · 2008-10-07, 03:39

Quote:

Originally Posted by LoweGear

Images of the Robot Damashii Cherudim Gundam, revealing a hidden part underneath the butt plates:

Spoiler for Robot Damashii:

Quote:

Originally Posted by Rising Dragon

Looks like a giant scope.

Just found something. Take a good look at that newly-revealed part.

Now look at this sonar unit attached to the Dynames Torpedo.

Sooo... now what is everyone's speculations on what it is, and what the tail pieces do?

duotiga · 2008-10-07, 07:28

HG GN Arms Type D + HG Dynames review

LightningZERO · 2008-10-07, 09:10

Why the missiles aren't painted orange?

Sir Dearka · 2008-10-07, 09:18

The basic Dynames GN Arms DOES need some work to look really good :]

MeesesGlokmah · 2008-10-07, 09:25

Quick question. I just got the order form from HLJ on how much I owe them. I was just wondering if $60 is a good price for a 1/100 Astraea, an HG 1/144 Throne Zwei, an HG 1/144 Gundam Virtue, and 2 action bases? This is the price including all the shipping. It's alot more than I thought it would be.

Copy Ninja Kakashi · 2008-10-07, 09:47

Quote:

Originally Posted by MeesesGlokmah

Quick question. I just got the order form from HLJ on how much I owe them. I was just wondering if $60 is a good price for a 1/100 Astraea, an HG 1/144 Throne Zwei, an HG 1/144 Gundam Virtue, and 2 action bases? This is the price including all the shipping. It's alot more than I thought it would be.

Well a great part of the price is the shipping cost. How more you order (in weight) the higher the shipping cost will be.

MeesesGlokmah · 2008-10-07, 09:56

Quote:

Originally Posted by Copy Ninja Kakashi

Well a great part of the price is the shipping cost. How more you order (in weight) the higher the shipping cost will be.

Yeah I know. It's just that after I added up the weights and did the estimating, the actual shipping is still twice as much as the estimate. Is it still a good price though?

duotiga · 2008-10-07, 10:28

Quote:

Originally Posted by LightningZERO

Why the missiles aren't painted orange?

same qn ask when i open my box a few days ago......

StratoSpear · 2008-10-07, 10:58

Lol! I managed to complete my MG Impulse in just two days!!

Onto my short review of the model kit:

- The Core Splendor doesn't look anything like it's anime counterpart
- The Force Shilouette wings... Can they be any longer? My jaw dropped when I completed the Shilouette pack.
- Arms: Not quite tight as i hoped....
- Legs: Too tight! And I'm still trying to get used to transforming it into the Leg Flyer.
- Head: Much more slimmer compared to my No Grade 1:100 Sword Impulse.
- Torso: Didn't know the vulcan section could fold to cover the Impulse's face
- Overall: Pretty sleek kit, haven't posed it yet since I'm getting an action base for it tomorrow.

One thing I liked about this kit is that it surpassed it's HCM-Pro counterpart in terms of appearance and proportions. The feets are not Sandrock-huge like the HCM-Pro's. and it has seemingly more movable parts and details. Especially the shield's sliding gimmick, this Gunpla managed to pull that one off quite well.

One downfall though: The beam part for the Excalibur... The tip part fits like a glove but the linear part is just a little too tall fit into the Excalibur, once I fitted the beam in, the mid part of it bended..... Not cool. Otherwise, this kit scores well in over all, you won't regret buying this kit!

(Next in my list: MG Infinite Justice)

Kelrys · 2008-10-07, 11:13

Develop a lust in OverFlags recently. Is the HG 1/144 OverFlag worth buying?

StratoSpear · 2008-10-07, 11:26

Quote:

Originally Posted by Kelrys

Develop a lust in OverFlags recently. Is the HG 1/144 OverFlag worth buying?

Sure is.... But I'd prefer it if you buy the 1:100 instead.... Though it's still a HG, but it has details of a MG model.

RAVNEN · 2008-10-07, 12:16

Quote:

Originally Posted by Rising Dragon

Just found something. Take a good look at that newly-revealed part.

Now look at this sonar unit attached to the Dynames Torpedo.

Sooo... now what is everyone's speculations on what it is, and what the tail pieces do?

What a sonar unit on its butt? Cherudim can do underwater combat then,double the coolness.

AaKkisa · 2008-10-07, 16:03

Quick question, does anyone know what would be the best way to bend the plastic rods that come with the MG Strike Freedom Full Burst Mode so I display the DRAGOON system properly?

Derringer · 2008-10-07, 16:26

Quote:

Originally Posted by MeesesGlokmah

Quick question. I just got the order form from HLJ on how much I owe them. I was just wondering if $60 is a good price for a 1/100 Astraea, an HG 1/144 Throne Zwei, an HG 1/144 Gundam Virtue, and 2 action bases? This is the price including all the shipping. It's alot more than I thought it would be.

Yes $60 is a good price for all of that including shipping.

Critias · 2008-10-07, 16:27

Quote:

Originally Posted by AaKkisa

Quick question, does anyone know what would be the best way to bend the plastic rods that come with the MG Strike Freedom Full Burst Mode so I display the DRAGOON system properly?

I thik you're supposed to dip the clear rod thingies in warm/hot water then you can bend them. My memory is a tad fuzzy.

srb · 2008-10-08, 07:51

Very hot water should make it malleable.

Tip: Don't use boiling water, it is a bad idea.

duotiga · 2008-10-08, 07:56

1/100 Exia Rollout color - 2,300 Yen

LightningZERO · 2008-10-08, 07:57

Who cares about that, bring on the Terminator Exia!

Kelrys · 2008-10-08, 08:08

What does rollout colour means? Stock black and white?

duotiga · 2008-10-08, 08:09

roll out means manufactured but without actual paint color

2008-10-07, 09:10	Link #8123
LightningZERO You are Dominated! Author Join Date: Dec 2004 Location: Earth Age: 35	Why the missiles aren't painted orange? __________________ その再生を破壊する Destroy This Rebirth

2008-10-07, 10:58	Link #8129
StratoSpear Titans Test Team Pilot Join Date: Feb 2008 Location: The Elysium	Lol! I managed to complete my MG Impulse in just two days!! Onto my short review of the model kit: - The Core Splendor doesn't look anything like it's anime counterpart - The Force Shilouette wings... Can they be any longer? My jaw dropped when I completed the Shilouette pack. - Arms: Not quite tight as i hoped.... - Legs: Too tight! And I'm still trying to get used to transforming it into the Leg Flyer. - Head: Much more slimmer compared to my No Grade 1:100 Sword Impulse. - Torso: Didn't know the vulcan section could fold to cover the Impulse's face - Overall: Pretty sleek kit, haven't posed it yet since I'm getting an action base for it tomorrow. One thing I liked about this kit is that it surpassed it's HCM-Pro counterpart in terms of appearance and proportions. The feets are not Sandrock-huge like the HCM-Pro's. and it has seemingly more movable parts and details. Especially the shield's sliding gimmick, this Gunpla managed to pull that one off quite well. One downfall though: The beam part for the Excalibur... The tip part fits like a glove but the linear part is just a little too tall fit into the Excalibur, once I fitted the beam in, the mid part of it bended..... Not cool. Otherwise, this kit scores well in over all, you won't regret buying this kit! (Next in my list: MG Infinite Justice) __________________ "You cannot be bad at watching a movie. You cannot be bad at listening to an album. ...But you can be bad at playing a videogame, and the game will punish you and deny you access to the rest of the videogame."

2008-10-07, 16:03	Link #8133
AaKkisa Member Join Date: Oct 2008 Location: Long Island, NY Age: 37	MG Strike Freedom Full Burst Mode Quick question, does anyone know what would be the best way to bend the plastic rods that come with the MG Strike Freedom Full Burst Mode so I display the DRAGOON system properly?

2008-10-08, 07:57	Link #8138
LightningZERO You are Dominated! Author Join Date: Dec 2004 Location: Earth Age: 35	Who cares about that, bring on the Terminator Exia! __________________ その再生を破壊する Destroy This Rebirth

2008-10-07, 07:28	Link #8122
duotiga Zander Yuusha Kyorugold Join Date: May 2003 Location: Singapore Age: 40	HG GN Arms Type D + HG Dynames review

2008-10-07, 09:18	Link #8124
Sir Dearka Inglourious Buster Join Date: Dec 2007	The basic Dynames GN Arms DOES need some work to look really good :]

2008-10-07, 09:25	Link #8125
MeesesGlokmah Senior Member Join Date: Oct 2007	Quick question. I just got the order form from HLJ on how much I owe them. I was just wondering if $60 is a good price for a 1/100 Astraea, an HG 1/144 Throne Zwei, an HG 1/144 Gundam Virtue, and 2 action bases? This is the price including all the shipping. It's alot more than I thought it would be.

2008-10-07, 11:13	Link #8130
Kelrys Same old same Join Date: Sep 2008 Location: HRL Age: 37	Develop a lust in OverFlags recently. Is the HG 1/144 OverFlag worth buying?

2008-10-08, 07:51	Link #8136
srb I can see time itself! Join Date: Jan 2004 Location: Kingdom of Sweden Age: 37	Very hot water should make it malleable. Tip: Don't use boiling water, it is a bad idea.

2008-10-08, 07:56	Link #8137
duotiga Zander Yuusha Kyorugold Join Date: May 2003 Location: Singapore Age: 40	1/100 Exia Rollout color - 2,300 Yen

2008-10-08, 08:08	Link #8139
Kelrys Same old same Join Date: Sep 2008 Location: HRL Age: 37	What does rollout colour means? Stock black and white?

2008-10-08, 08:09	Link #8140
duotiga Zander Yuusha Kyorugold Join Date: May 2003 Location: Singapore Age: 40	roll out means manufactured but without actual paint color