AnimeSuki Forums

Zantetsuken · 2010-01-07, 23:29

the colors i mean. In the games it have more colors

GN0010 Nosferatu · 2010-01-08, 00:15

Quote:

Originally Posted by Zantetsuken

the colors i mean. In the games it have more colors

Well, those are the colors its had since its debut, don't know what to tell ya.

Zantetsuken · 2010-01-08, 02:12

really? then the games really improved it.

JMvS · 2010-01-08, 08:47

Aren't the shades (the blue especially) a bit darker in the movie?

pumpkins · 2010-01-09, 07:29

new images of the MG GN-X from ngeekhiong

you'll be getting only 1 GN-Drive base... and markings for Sergei (11), Soma (20), Patrick (1) & Daryl (21) will be given event though you'll only get figures of Sergei and Soma.

can't really see the pictures properly, but it looks like the GN-Claw can function as it should be.

RES-01 Perses Gundam · 2010-01-09, 07:47

Quote:

Originally Posted by pumpkins

new images of the MG GN-X from ngeekhiong

you'll be getting only 1 GN-Drive base... and markings for Sergei (11), Soma (20), Patrick (1) & Daryl (21) will be given event though you'll only get figures of Sergei and Soma.

can't really see the pictures properly, but it looks like the GN-Claw can function as it should be.

There's an error. It should be UN GN tau-drive MS, not ESF.

JC... · 2010-01-09, 15:56

GN-X Failure mode - Includes Patrick And no upper body.

GNWeapon · 2010-01-10, 01:30

HG 1/144 00 Gundam 7S/G - Feb 2010 Release

Do you guys believe that the huge GN Buster Sword II is mounted onto the GN Drive by just 1 connector? (The same way you mount the GN Shield.) 1 connector for a huge sword?

Un1ver5e · 2010-01-10, 01:59

Quote:

Originally Posted by GNWeapon

HG 1/144 00 Gundam 7S/G - Feb 2010 Release

Do you guys believe that the huge GN Buster Sword II is mounted onto the GN Drive by just 1 connector? (The same way you mount the GN Shield.) 1 connector for a huge sword?

Same connector principle for the Damashi version I believe. It seems to be stable though.

GNWeapon · 2010-01-10, 02:15

Quote:

Originally Posted by Un1ver5e

Same connector principle for the Damashi version I believe. It seems to be stable though.

No connections onto the cones whatsoever? Just hangs over the cone?

Tormenk · 2010-01-10, 02:30

The connection point seems to be stable enough with the Raiser wings and GN shield. It's not like there are any more connection points to utilize on the cones.

Given the size and weight of the buster sword, worrying about whether the drive holder will sag under the weight of it after some time is the real question.

GNWeapon · 2010-01-10, 02:48

I'm more concerned over whether there's going to be any sort of connections on the cones itself. Something like the Raiser's wings connected into 1 of the trench of the cone.

My drive cones are modified up with verniers (as where they should be in the trenches). Any connections like the Raiser wings for the 7SG will not be nice for me, or I'll have to mod up a 3rd cone for this.

SonicSP · 2010-01-10, 12:35

I've got a huge problem for my HG 00 Gundam/Raiser.

The hole at the bottom thats suppose to connect to the stand?Its become sort of loose,so now its grip over 00 isnt as strong anymore.

In 00 Raiser form,it used to cause this problem slightly before because of its weight,but for some reason now it wont even hold 00 Gundam in place except conservative non slope poses of course.

I know its 00's hole and not the stand because I've tested it several stands,some of which are in good condition and handle my others nicely too.

So,anybody got any tips on how to fix this?And has anybody here encountered this problem before?

Znozzy · 2010-01-10, 14:37

Quote:

Originally Posted by SonicSP

I've got a huge problem for my HG 00 Gundam/Raiser.

The hole at the bottom thats suppose to connect to the stand?Its become sort of loose,so now its grip over 00 isnt as strong anymore.

In 00 Raiser form,it used to cause this problem slightly before because of its weight,but for some reason now it wont even hold 00 Gundam in place except conservative non slope poses of course.

I know its 00's hole and not the stand because I've tested it several stands,some of which are in good condition and handle my others nicely too.

So,anybody got any tips on how to fix this?And has anybody here encountered this problem before?

i've got a trick to fix that, what i usually do is i take a small piece of toilet paper and put between the stand + hole, it usually tightens it enough, easy to remove aswell, no need for superglue or anything like that, multiple layers works aswell, though be careful when putting the stand into the hole, you dont want to break anything.

GrimmReaperNL · 2010-01-10, 19:16

To bad the HG 1/144 00 Gundam 7S/G doesn't come with the gn blade III, that would have made this puppy complete.
then again, that doesn't fit bandai's marketing plans does it...

Spitfire · 2010-01-10, 19:23

Quote:

Originally Posted by GrimmReaperNL

To bad the HG 1/144 00 Gundam 7S/G doesn't come with the gn blade III, that would have made this puppy complete.
then again, that doesn't fit bandai's marketing plans does it...

Well, there is the fact that the 00 7S/G never actually uses the GN Sword III as far as I know. The original 00 7S never uses it as its not yet built, and I don't think the 7S/G uses it either.

GrimmReaperNL · 2010-01-10, 20:03

Quote:

Originally Posted by Spitfire

Well, there is the fact that the 00 7S/G never actually uses the GN Sword III as far as I know. The original 00 7S never uses it as its not yet built, and I don't think the 7S/G uses it either.

it wasn't for a sence of belong, more of a sence in complete.

one kit will all 00 weapons (wether the normal or 007s gn long/short blade) :P

Rising Dragon · 2010-01-10, 21:06

Quote:

Originally Posted by GrimmReaperNL

it wasn't for a sence of belong, more of a sence in complete.

one kit will all 00 weapons (wether the normal or 007s gn long/short blade) :P

No, you see, that's what happens after they release the 00 Gundam Seven Sword/G.

GN0010 Nosferatu · 2010-01-10, 21:08

Quote:

Originally Posted by GrimmReaperNL

it wasn't for a sence of belong, more of a sence in complete.

one kit will all 00 weapons (wether the normal or 007s gn long/short blade) :P

Come out of your little fantasy world man. Bandai never includes all the weapons a Gundam uses at once.

GrimmReaperNL · 2010-01-10, 21:13

it's my fantasy world that keeps me sane-ish...! :P

2010-01-07, 23:29	Link #16181
Zantetsuken Senior Member Join Date: Dec 2008 Age: 33	the colors i mean. In the games it have more colors __________________

2010-01-08, 02:12	Link #16183
Zantetsuken Senior Member Join Date: Dec 2008 Age: 33	really? then the games really improved it. __________________

2010-01-08, 08:47	Link #16184
JMvS Rawrrr! Join Date: Mar 2008 Location: CH aka Chocaholic Heaven Age: 40	Aren't the shades (the blue especially) a bit darker in the movie? __________________

2010-01-10, 02:30	Link #16191
Tormenk Senior Member Join Date: Jul 2007 Location: Gaf's Room	The connection point seems to be stable enough with the Raiser wings and GN shield. It's not like there are any more connection points to utilize on the cones. Given the size and weight of the buster sword, worrying about whether the drive holder will sag under the weight of it after some time is the real question. __________________ "Are you afraid of change? Or are you afraid to change?" "Wheel turns, river flows and life goes on." "Best way to kill a man, is to leave him alone." "Until you come, until we close our eyes."

2010-01-10, 12:35	Link #16193
SonicSP Sonic!I AM SONIC!!!!! Join Date: Nov 2008 Location: Hot Non-Winter Place Age: 33	I've got a huge problem for my HG 00 Gundam/Raiser. The hole at the bottom thats suppose to connect to the stand?Its become sort of loose,so now its grip over 00 isnt as strong anymore. In 00 Raiser form,it used to cause this problem slightly before because of its weight,but for some reason now it wont even hold 00 Gundam in place except conservative non slope poses of course. I know its 00's hole and not the stand because I've tested it several stands,some of which are in good condition and handle my others nicely too. So,anybody got any tips on how to fix this?And has anybody here encountered this problem before? __________________

2010-01-09, 07:29	Link #16185
pumpkins Senior Member Join Date: May 2009	new images of the MG GN-X from ngeekhiong you'll be getting only 1 GN-Drive base... and markings for Sergei (11), Soma (20), Patrick (1) & Daryl (21) will be given event though you'll only get figures of Sergei and Soma. can't really see the pictures properly, but it looks like the GN-Claw can function as it should be.

2010-01-09, 15:56	Link #16187
JC... I am a Pie Join Date: Oct 2009 Location: In a fantasy.	GN-X Failure mode - Includes Patrick And no upper body.

2010-01-10, 01:30	Link #16188
GNWeapon On Trial Join Date: Apr 2008	HG 1/144 00 Gundam 7S/G - Feb 2010 Release Do you guys believe that the huge GN Buster Sword II is mounted onto the GN Drive by just 1 connector? (The same way you mount the GN Shield.) 1 connector for a huge sword?

2010-01-10, 02:48	Link #16192
GNWeapon On Trial Join Date: Apr 2008	I'm more concerned over whether there's going to be any sort of connections on the cones itself. Something like the Raiser's wings connected into 1 of the trench of the cone. My drive cones are modified up with verniers (as where they should be in the trenches). Any connections like the Raiser wings for the 7SG will not be nice for me, or I'll have to mod up a 3rd cone for this.

2010-01-10, 19:16	Link #16195
GrimmReaperNL Oro? Join Date: Sep 2009 Location: Netherlands Age: 37	To bad the HG 1/144 00 Gundam 7S/G doesn't come with the gn blade III, that would have made this puppy complete. then again, that doesn't fit bandai's marketing plans does it... __________________

2010-01-10, 21:13	Link #16200
GrimmReaperNL Oro? Join Date: Sep 2009 Location: Netherlands Age: 37	it's my fantasy world that keeps me sane-ish...! :P __________________