AnimeSuki Forums

ryanvamp · 2009-05-04, 12:57

Quote:

Originally Posted by ako07

http://www.dannychoo.com/adp/eng/585/Gundam.html

Thank you. Regarding my previous question about HW Japan, I'm still open to suggestions.

astranagun · 2009-05-04, 16:20

For those who have it is the Unicorn model worthy 40 €?

vektar · 2009-05-04, 16:53

Quote:

Originally Posted by Setsuna.F.Seiei

finally starting to paint my gunpla............and i make a mess out of it.............can anyone tell me how do i get rid of mistake when painting using gundam markers? i use a pen knife......

For me i would never use a gundam marker to paint a gundam, only for those hard to reach or small detail areas the over all look of gundam marks isnt the very good, you can get a lot of paint marks and uneven areas.

Nerroth · 2009-05-04, 17:17

I assembled my HG Seraphim today!

Spoiler for Dual-wielding:

Spoiler for Taking aim!:

Spoiler for Using one of the cannon heads from the Seravee's dummy backpack:

Spoiler for Not quite snug, but close enough.:

Amber.Dawn · 2009-05-04, 18:02

Quote:

Originally Posted by astranagun

For those who have it is the Unicorn model worthy 40 €?

I think so. I found it really fun to build.
Though don't expect much in terms of articulation.

Sir Dearka · 2009-05-04, 18:39

Anybody familiar with Robot Damashii Cherudim or HCM Pro Cherudim? If I wanted to buy one of those, which one'd be better?

vektar · 2009-05-04, 18:46

Quote:

Originally Posted by Sir Dearka

Anybody familiar with Robot Damashii Cherudim or HCM Pro Cherudim? If I wanted to buy one of those, which one'd be better?

get both

Sir Dearka · 2009-05-04, 18:54

Quote:

Originally Posted by vektar

get both

No money. Gotta choose... sadly

Throne Zwei · 2009-05-04, 19:02

Quote:

Originally Posted by Sir Dearka

Anybody familiar with Robot Damashii Cherudim or HCM Pro Cherudim? If I wanted to buy one of those, which one'd be better?

I have the Damashii Cherudim. I think it's a pretty good figure. I'd recommend it.

Setsuna.F.Seiei · 2009-05-04, 19:11

Quote:

Originally Posted by justsomeguy

Gundam markers and acrylic paints are easily wiped off by using cotton swaps with rubbing alcohol (make sure it has no acetone).

Enamel paints can be wiped off by vigorously rubbing with denatured ethanol.

rubbing alcohol? how does it look like?

Exia_00 · 2009-05-04, 20:13

Quote:

Originally Posted by Throne Zwei

I have the Damashii Cherudim. I think it's a pretty good figure. I'd recommend it.

i like the damashi Cherudim, i have it but i find the shield bits come off on the "Gn drive tail" thing, other then that the damashi is really nice, but the HCM Pro is a hell of a lot more stable

GN0010 Nosferatu · 2009-05-04, 20:18

Anyone wanting anything from the 00 Damashii line should just get one. No questions asked, you WON'T be disappointed.

Un1ver5e · 2009-05-04, 20:26

Quote:

Originally Posted by Sir Dearka

Anybody familiar with Robot Damashii Cherudim or HCM Pro Cherudim? If I wanted to buy one of those, which one'd be better?

I vote for the Damashi. HCM Pro's too small.

Nerroth · 2009-05-04, 21:05

*patpats the Seraphim*

Don't worry, I know you look cool...

vektar · 2009-05-04, 21:06

Quote:

Originally Posted by Un1ver5e

I vote for the Damashi. HCM Pro's too small.

yeah i was just looking at pics of both and the Damashi looks better but not by much.

GrahamAker · 2009-05-04, 21:13

which line of gunpla should i buy? specially for exia.hcm pro is bmall agreed. if u want for modelling only then go for 1/100. if u want for little play as well as modelling ,then its definately hg 1/144. hg 1/144 has te highest range and variety across all gundam lineup thats why bandai started promoting uc in hg 1/144.but there is one darkhorse in the lineup.its the superhcmpro 1/144 scale exia deluxe .its only one presently in the line up but its the best. in robot damashi articulation is also good , but figure will not last long.

kakakka · 2009-05-04, 21:27

Quote:

Originally Posted by Nerroth

Spoiler for size:

Looks nice.

I might be finishing mine one of these days too... If I'm not lazy...

Nerroth · 2009-05-04, 21:34

Quote:

Originally Posted by kakakka

[/SPOILER]

Looks nice.

*Seraphim feels happier now*

He is pretty neat, alright!

I'd almost get a second one, and Batman-ify it...

Quote:

I might be finishing mine one of these days too... If I'm not lazy...

Don't forget to keep the forward barrells for the Seravee's dummy backpack's cannons - they fit just fine on the Seraphim's arms.

Un1ver5e · 2009-05-04, 21:40

Quote:

Originally Posted by vektar

yeah i was just looking at pics of both and the Damashi looks better but not by much.

Actually HCM Pro has more details, but it's 1/200 size does not show them off well IMO. HCM Pro's also more expensive.

GN0010 Nosferatu · 2009-05-05, 00:16

Quote:

Originally Posted by bhus12

which line of gunpla should i buy? specially for exia.hcm pro is bmall agreed. if u want for modelling only then go for 1/100. if u want for little play as well as modelling ,then its definately hg 1/144. hg 1/144 has te highest range and variety across all gundam lineup thats why bandai started promoting uc in hg 1/144.but there is one darkhorse in the lineup.its the superhcmpro 1/144 scale exia deluxe .its only one presently in the line up but its the best. in robot damashi articulation is also good , but figure will not last long.

Wrong, I have the Robot Damashii 00 and Ahead, and I'll be honest, I've put them through play, because that is what the new RD was created for. Wear and tear from kids. I have to say, that the figures are incredibly durable. If you get an RD figure, it's gonna last a long while.

2009-05-04, 17:17	Link #13044
Nerroth NePoi! Join Date: Dec 2007 Location: Ontario, Canada Age: 43	I assembled my HG Seraphim today! Spoiler for Dual-wielding: Spoiler for Taking aim!: Spoiler for Using one of the cannon heads from the Seravee's dummy backpack: Spoiler for Not quite snug, but close enough.: __________________ Last edited by Nerroth; 2009-05-04 at 18:04.

2009-05-04, 18:39	Link #13046
Sir Dearka Inglourious Buster Join Date: Dec 2007	Anybody familiar with Robot Damashii Cherudim or HCM Pro Cherudim? If I wanted to buy one of those, which one'd be better? __________________

2009-05-04, 21:05	Link #13054
Nerroth NePoi! Join Date: Dec 2007 Location: Ontario, Canada Age: 43	patpats the Seraphim Don't worry, I know you look cool... __________________

2009-05-04, 16:20	Link #13042
astranagun Senior Member Join Date: Sep 2007 Location: Hinamizawa Age: 38	For those who have it is the Unicorn model worthy 40 €?

2009-05-04, 20:18	Link #13052
GN0010 Nosferatu Where's the monoeye? Join Date: Dec 2008 Location: Hargenteen Age: 35	Anyone wanting anything from the 00 Damashii line should just get one. No questions asked, you WON'T be disappointed.

2009-05-04, 21:13	Link #13056
GrahamAker 狙撃する準備ができ Join Date: Apr 2009 Location: in someone's heart!!! Age: 34	which line of gunpla should i buy? specially for exia.hcm pro is bmall agreed. if u want for modelling only then go for 1/100. if u want for little play as well as modelling ,then its definately hg 1/144. hg 1/144 has te highest range and variety across all gundam lineup thats why bandai started promoting uc in hg 1/144.but there is one darkhorse in the lineup.its the superhcmpro 1/144 scale exia deluxe .its only one presently in the line up but its the best. in robot damashi articulation is also good , but figure will not last long.