Gundam Models Discussion Thread

[Namihana]

As far as we know, only the Avalanche Exia was released. None of the other Variants of the other suits were released yet.

[GrahamAker]

Originally Posted by Namihana

As far as we know, only the Avalanche Exia was released. None of the other Variants of the other suits were released yet.

i meant have any1 of u guys seen any 1 modding hg 1/144 kyrios into kyrios gust!

[LoweGear]

Originally Posted by MakubeX2

The issue at hand now is whether do you want to fall for Bandai's Marketing ploy at cashing in on a still popular franchise by releasing a substandard good. No matter how you look at it, there's a drop in qualtity when compared to past PG releases and yet it's the priciest.

As I've said, if you can get this at a vast discount, go ahead otherwise it's not worth the price Bandai is demanding. And don't put this kit on a pedestral and worship it just because the source material is good. The best PG is still the GP-01, try arguing that.

Actually I'm not trying to get into the issue of it being the "BEST PG EVAH" or something, I'm just addressing a specific issue that was talked about before, which is it's so called lack of articulation compared to previous PG's. I'm just trying to argue that it doesn't really lack in articulation compared to previous PG models like the PG Strike (the PG Strike inner frame leg articulation looks impressive, but only because it's so well done. An observative look shows that the Strike knee only bends so far and still bends at an angle compared to the PG 00's. The 00's only looks less poseable because it uses a visible double joint.) And I did agree about the comments on the lack of inner frame detail.

And since I'm not arguing about the price - quality aspect of the 00, no I will not argue about it

[SonicSP]

Originally Posted by LoweGear

More images of the PG 00 Gundam's inner frame:





I do like the hollowness of the GN Condenser areas, considering they're basically supposed to be just large GN Particle tanks.

Also I don't quite see the "lack of articulation" that's been said here, especially on the knees, given that the lower leg can align itself perpendicularly to the thigh (this is shown even in the previous inner frame images). Considering that not even the human body can achieve perfect perpendicularity with the legs I can honestly say I'm pleased with the articulation. The lack of detail on the inner frame compared to previous PG's is a valid one though, but then again, most people probably just pose their PG's and MG's with armor on.

OMG!!!!!!Its's Seraphim...........I swear it is.Even the poses and stance are similar.

[RAVNEN]

Wow nice PG 00,i keep staring at those hole with shock & awe.Can't wait to see if the MG 00 would've same hole like that.

[vektar]

Originally Posted by LoweGear

More images of the PG 00 Gundam's inner frame:

Spoiler for PG 00 inner frame:

I do like the hollowness of the GN Condenser areas, considering they're basically supposed to be just large GN Particle tanks.

Also I don't quite see the "lack of articulation" that's been said here, especially on the knees, given that the lower leg can align itself perpendicularly to the thigh (this is shown even in the previous inner frame images). Considering that not even the human body can achieve perfect perpendicularity with the legs I can honestly say I'm pleased with the articulation. The lack of detail on the inner frame compared to previous PG's is a valid one though, but then again, most people probably just pose their PG's and MG's with armor on.

As i thought it was just the person who removed and posed the last pics of the 00 frame with chunks of armor on it still. It was hard to believe the PG would look like that there was so many things wrong with they way 00 was set up in that pic and it just caused confusion.

[StratoSpear]

Originally Posted by bhus12

this garazzo is made by sixyuna on some jap gunpla forum!

It's kindda funny to see that the person who made this painted all BUT the fingers..

[GrahamAker]

Originally Posted by StratoSpear

It's kindda funny to see that the person who made this painted all BUT the fingers..

yup otherwise it would have been red comet's garazzo!

[Tormenk]

Dalong has the box contents of the MG Blue Frame up..somehow. Seems like there is a blue action base stand 2 included to support the tactical arms, a extra long arm for it as well. The beam effects for the tonfas are made up of two pieces each. Even the polycaps are in blue.

http://www.dalong.net/review/mg/m124/m124_i.htm

Spoiler for size:

---

Just got the Reborns and I have to say the similarities to the Exia is certainly there. The design of the faceplate, large single V-fin and even the weapons to a small extent.

[Namihana]

Originally Posted by Tormenk

Dalong has the box contents of the MG Blue Frame up..somehow. Seems like there is a blue action base stand 2 included to support the tactical arms, a extra long arm for it as well. The beam effects for the tonfas are made up of two pieces each. Even the polycaps are in blue.


Just got the Reborns and I have to say the similarities to the Exia is certainly there. The design of the faceplate, large single V-fin and even the weapons to a small extent.

Ohh...the MG Blue Frame!! Finally! It looks very nice indeed!


And I sorta agree on the Reborns Gundam. Instead of the sword, we get a massive gun instead. But the similarities are there. IMO, it also reminds me of Amuro's final suit, the Hi Nu.

[Vandalier]

18 oktober 2009
the guy who painted Kshatria yesterday is starting painting PG 00
so quick T_T

[Namihana]

Looks like the swords are somewhat different from the HG's. Not that it's a bad thing though. I see a gap on the side of the blades where the edge should be. Are they for effect parts?

[Vandalier]

yes the gap is for the chrome parts
you can see on previous posting

[atlans89]

Wonder if someone had posted these pix



Some scans from Hobby Japan November issue. Good news for everyone

[GrahamAker]

Originally Posted by atlans89

Wonder if someone had posted these pix



Some scans from Hobby Japan November issue. Good news for everyone

thanx for the info dude

hg 1/144 Seravee ーGNHW/3G






gr8 job here everything is done excellently . only if original color black /white scheme should have been retained! here is the link to the modellers blog-
http://ameblo.jp/acquabbb

[GN0010 Nosferatu]

Beam saber spam is spamming....

[Ardi220288]

Originally Posted by atlans89

Wonder if someone had posted these pix



Some scans from Hobby Japan November issue. Good news for everyone

I can't read it but does it mean 1:100 scale 00 7S and Sefer Rasiel are coming?


Edit: If it is definitely good news for me

[Kitaeryu]

Oh my... 00 7S is gonna be released as a gunpla ?!? :O I will totally buy it if it does come out. If its not being released and I misinterpreted the picture, thats gonna be like a kick to the balls xD

[SonicSP]

Great..........too bad I really dislike the S2 1/100s.

[bio9205]

Originally Posted by Kitaeryu

Oh my... 00 7S is gonna be released as a gunpla ?!? :O I will totally buy it if it does come out. If its not being released and I misinterpreted the picture, thats gonna be like a kick to the balls xD

Well, let me give you the kick. It's just a mod.