AnimeSuki Forums

Infinite Zenith · 2012-08-31, 20:16

Quote:

Originally Posted by StrikeFreedomV2

We have a Deal^^

I'm almost done applying the decals...I should have the finished product out by Sunday or Monday (depending on how much university-related material I need to address

)

loon1688 · 2012-08-31, 21:19

RG Justice Gundam!!!! Finally done!

casval cehack · 2012-08-31, 22:54

Quote:

Originally Posted by loon1688

RG Justice Gundam!!!! Finally done!

I like this one.

Nice, you've even painted the tiny RG figure (never painted mine). Is there a Freedom catching Justice in Orb pose?

evolution_ayu · 2012-08-31, 23:54

Quote:

Originally Posted by Chiu_fan

I just got myself a Badger 150 Airbrush. My fellow IPMS member sold it to me. I think he said it was about 20 or so years old and it still works!

My only problem is the air source. I can't afford for a compressor just yet so I was thinking of using a small oxygen tank with a regulator attached. Any thoughts?

The cost of buying a new tank/refilling it every time it runs out will catch up with the compressor. If you're going to use it in the long term, it's more cost-effective to get a compressor from the beginning. Just have to buy fewer kits for the time being.

IMO it's a small price to pay if you want to have better looking kits.

StrikeFreedomV2 · 2012-09-01, 07:28

Quote:

Originally Posted by ForwardUntoDawn

I'm almost done applying the decals...I should have the finished product out by Sunday or Monday (depending on how much university-related material I need to address

)

Finished Epyon today

Here are some pics, taken with my smartphone. I hope you like them

The Heatrod is pretty heavy, too heavy for decent poses

Spoiler for size:

Gonna leave the Heat Rod off the kit for now

Spoiler for size:

Against Wing Zero, I will pose it kinda like that

Spoiler for size:

Until Wing Zero is finished, I leave it pose like that

Spoiler for size:

Bashfulz · 2012-09-01, 12:17

saw these new kits at the singapore gundam expo

Spoiler for images:

MoonLightShadows · 2012-09-01, 17:17

I pose my Gafran like that, Take its tail, wings an head off an make it like the Innovator escape pod.

GM Sniper an Buster are looking awesome, Looks like it has better moveable handels on its cannon now.

Obelisk ze Tormentor · 2012-09-01, 20:09

Quote:

Originally Posted by StrikeFreedomV2

Finished Epyon today

Here are some pics, taken with my smartphone. I hope you like them

The Heatrod is pretty heavy, to heavy for decent poses

The weight of heat rod is indeed its main problem. Still, there are some "locking mechanism" for the heat rod for it to be decently posed. In many occasions, I even managed to pose Epyon whipping upward with it. It's too bad I didn't take some photos of it. What I got is my old photos where I pose Epyon whipping Zero.

Images

Sorry; dynamic content not loaded. Reload?

Try it. It will look better

.

Rickketik · 2012-09-01, 20:18

Quote:

Originally Posted by loon1688

RG Justice Gundam!!!! Finally done!

wow this is so tight! Great job man!
and I never knew Freedom's black wings could disconnect like that.. Awesome!

Obelisk ze Tormentor · 2012-09-01, 20:29

Quote:

Originally Posted by Rickketik

wow this is so tight! Great job man!
and I never knew Freedom's black wings could disconnect like that.. Awesome!

Only the RG can do it though.

@loon
I forgot to comment your photos. Excellent job! Both your Justice & Freedom look awesome!! As for me, I might not gonna applied as much stickers/decals on the RG coz I really want to show the color & design aesthetics

.

bio9205 · 2012-09-01, 20:38

Quote:

Originally Posted by Bashfulz

saw these new kits at the singapore gundam expo

Spoiler for images:

Yeah, Legilis was listed to have a September release, when it's supposed to be October? I'm considering pre-ordering it from the Expo, but we haven't seen any unpainted pictures of it yet, so I'm holding back...

Chiu_fan · 2012-09-01, 22:22

Quote:

Originally Posted by evolution_ayu

The cost of buying a new tank/refilling it every time it runs out will catch up with the compressor. If you're going to use it in the long term, it's more cost-effective to get a compressor from the beginning. Just have to buy fewer kits for the time being.

IMO it's a small price to pay if you want to have better looking kits.

You've got a point there. But I just need a cheap alternative for now until I can pay for a compressor, unless there is a very cheap and effective air compressor unit out there. Also, I wouldn't worry about refueling and its cost that much.

HasuMasu · 2012-09-01, 23:52

That GM Sniper is looking damn fine.

StrikeFreedomV2 · 2012-09-02, 00:49

Quote:

Originally Posted by Obelisk ze Tormentor

The weight of heat rod is indeed its main problem. Still, there are some "locking mechanism" for the heat rod for it to be decently posed. In many occasions, I even managed to pose Epyon whipping upward with it. It's too bad I didn't take some photos of it. What I got is my old photos where I pose Epyon whipping Zero.

Images

Sorry; dynamic content not loaded. Reload?

Try it. It will look better

.

I already tried that it out, but the connection point in the shield isn't that strong on mine, it so it sag down instantlly

I only have the tip of the Head Rod in the shield at the moment and not even that tiny piece will stay the way I wan't it too.

bio9205 · 2012-09-02, 04:13

Why hasn't anyone mentioned this before? HG Legilis to finally come with yellow beams! Sold!

StrikeFreedomV2 · 2012-09-02, 12:59

Started on my MG Wing Zero totay. Building the wings and backpack first. Panel lining the wings is a pain -_-

Appel · 2012-09-02, 13:14

Quote:

Originally Posted by StrikeFreedomV2

Started on my MG Wing Zero totay. Building the wings and backpack first. Panel lining the wings is a pain -_-

Agreed, that part sucked :P

FalsePrime · 2012-09-02, 15:14

Quote:

Originally Posted by StrikeFreedomV2

Started on my MG Wing Zero totay. Building the wings and backpack first. Panel lining the wings is a pain -_-

Im thinking of grabbing the Pearl Gloss Ver just so I can get another Zero but not have to deal with panel lining the wings.

StrikeFreedomV2 · 2012-09-02, 15:53

Quote:

Originally Posted by FalsePrime

Im thinking of grabbing the Pearl Gloss Ver just so I can get another Zero but not have to deal with panel lining the wings.

Surely looks good, but I wouln't bother buying it. It would just look off compared to my other kits. But that's just me.

Skye629 · 2012-09-02, 18:15

Thanks to all people who responded to my where to get gunpla online posts ^^

Your advice is greatly appreciated and Im thankful for the help!

2012-09-01, 12:17	Link #27366
Bashfulz Stalker Join Date: Feb 2008 Location: Singapore Age: 36	saw these new kits at the singapore gundam expo Spoiler for images: Last edited by Bashfulz; 2012-09-01 at 12:35.

2012-09-01, 23:52	Link #27373
HasuMasu Senior Member Artist Join Date: Apr 2011 Location: The Middle Way	That GM Sniper is looking damn fine. __________________

2012-08-31, 21:19	Link #27362
loon1688 Member Join Date: Mar 2010 Location: Malaysia	RG Justice Gundam!!!! Finally done!

2012-09-01, 17:17	Link #27367
MoonLightShadows Gundam Meister Join Date: Apr 2010 Location: Mongolia with Marie	I pose my Gafran like that, Take its tail, wings an head off an make it like the Innovator escape pod. GM Sniper an Buster are looking awesome, Looks like it has better moveable handels on its cannon now.

2012-09-02, 04:13	Link #27375
bio9205 Reborn Join Date: Sep 2009 Age: 29	Why hasn't anyone mentioned this before? HG Legilis to finally come with yellow beams! Sold!

2012-09-02, 12:59	Link #27376
StrikeFreedomV2 Super Striker Join Date: Dec 2009 Location: Germany Age: 38	Started on my MG Wing Zero totay. Building the wings and backpack first. Panel lining the wings is a pain -_-

2012-09-02, 18:15	Link #27380
Skye629 Senior Member Join Date: Sep 2011	Thanks to all people who responded to my where to get gunpla online posts ^^ Your advice is greatly appreciated and Im thankful for the help!