AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Un1ver5e 2009-03-22 03:06

Quote:

Originally Posted by GN0010 Nosferatu (Post 2288834)
Apparently, there are 5 more 00 slots for the Robot Damashii line.

I say it's the Trans-Am colors of the other Gundams, plus the limited edition Trans-Am 00.

Quote:

Originally Posted by Un1ver5e (Post 2282338)
http://tamashii.jp/special/robot_dam...neup/index.php

There are another 5 ROBOT魂<SIDE MS> pictures which are not shown yet. I know 3 of the 5 are the Regnant, Trans Am Clear 00 Gundam, and Crossbone X1. Any idea what the other 2 are? Arche and Susanoo I hope.:uhoh:

Quote:

Originally Posted by duckroll (Post 2282489)
There are only 2 unknown MS units now. As listed on that same page after the 0 Gundam, it is as follows:

Gadessa (Bring), ???, Crossbone Gundam X-1, Crossbone Gundam X-2 Kai, ???.

Since we know about Regnant and Trans Am Clear 00 Gundam, that should be it. Which means there are no more until they announce more figures in the Side MS line.

Were you talking about these 5? I saw an entry on Ngee Kiong's blog (http://ngeekhiong.blogspot.com/2009/...ii-nation.html) saying something about another 4 more RDs from Gundam 00, but I'm not sure whether its an additional 4 to the 5 above, or a subset.

JayCee 2009-03-22 05:59

Quote:

Originally Posted by Un1ver5e (Post 2288350)
Thanks. Haha, I didn't really go test the extremes of Nadleeh's mobility cause I was more concerned with how to do his armour purge. :p I don't have much complaints with it though, the construction of it's arms are almost similar to the old MGs (I compared it with my Freedom), except that you can't move the shoulders forwards or backwords.

The legs are attached to the waist piece with ball joints, so you can't stretch them out too far. The feet are attached to the legs with also just ball joints instead of the second joint MGs have.

Maybe the only thing I have gripes about is that when you combine the pieces to form Virtue, The feet don't stay flat on the ground because of the thick armour and lack of the second ankle joint.

I'm pretty happy with this kit though, comparing the improvements Bandai have done with their NG 1/100s. While the old ones had blocky proportions, their Gundam 00 ones look rather appropriate.

Ha, lowly? Dude, they look awesome. Are those red tiny stuff stickers or decals? They add the finishing touch to a model. I hate how the sticker ones show with their sheen, while I'm too lazy to scratch out the individual decals.

Btw, how did you make the white background for your photoshoots? Is there any kind of program I can use?


Thanks for the compliment and answering question about Nadleeh. But to be honest if I was to get Nadleeh it would most probably be for purging armour/trans am mode. Anyhow being yeah they're decals that I use. Decals are really a patience game to be honest. Even for me it sometimes drives me nuts. As for white background google up on how to make home made light tent/box. I used a light tent I made with the white balance settings configured on my DSLR to tungsten +3. Due to my lamps I use gives off a yellow hue I needed to edit the rest of the light settings on adobe photoshop CS2. Hope that helps. (I should really get better bulbs but too lazy and saves money just using any old household appliances).

If all that sounds hassle to you. What I can do is if you take some clear pictures of your gundam in a well lit place with a clear background such as a wall or what not I can do the light edit settings for you. Just let me know if you want to email it to me or host it somewhere and give me the link to edit for you.

Scavenger 2009-03-22 08:05

I'm about to win an awesome Gundam figure on ebay in 3 minutes. Update in a few minutes.

EDIT:
I won a 1/60 scale Wing Gundam figure
http://cgi.ebay.nl/ws/eBayISAPI.dll?...m=370173588041

In the last minute some faggot started to bid too but I won. I paid quite a bit more but oh well.

It's the same figure as in this awful video: http://www.youtube.com/watch?v=xU2-kEQ-LTU

Oh yeah, I'm a tough Gundam pilot!

Knight_SV 2009-03-22 09:15

it's strange that bandai didn't made 1/60 00 Gundam, maybe they will go straight to PG 00 perhapds

MeesesGlokmah 2009-03-22 09:43

How much you guys wanna bet that Bandai will try to milk us for more money by releasing a Trans-Am Burst 00?!?

Un1ver5e 2009-03-22 09:45

Quote:

Originally Posted by JayCee (Post 2289466)
Thanks for the compliment and answering question about Nadleeh. But to be honest if I was to get Nadleeh it would most probably be for purging armour/trans am mode. Anyhow being yeah they're decals that I use. Decals are really a patience game to be honest. Even for me it sometimes drives me nuts. As for white background google up on how to make home made light tent/box. I used a light tent I made with the white balance settings configured on my DSLR to tungsten +3. Due to my lamps I use gives off a yellow hue I needed to edit the rest of the light settings on adobe photoshop CS2. Hope that helps. (I should really get better bulbs but too lazy and saves money just using any old household appliances).

If all that sounds hassle to you. What I can do is if you take some clear pictures of your gundam in a well lit place with a clear background such as a wall or what not I can do the light edit settings for you. Just let me know if you want to email it to me or host it somewhere and give me the link to edit for you.

Haha, my photography/photo-editing skills are practically non existent. I do have some basic photo editing sofeware though, anyway I can whitewash the background?

Appreciate it, we'll continue this conversation through pms then. :D

canti300 2009-03-22 12:00

need help with gundam toy scale
 
Hey i was wondering if you guys could help me. I would of started a new thread but this site wont seem to let me -_- so i thought this would be the best place to ask. I recently got two gundam toys, one of which was a 1/200 scale gundam. The 1/200 scale was a bit smaller than the other toy i got, which was an MSIA Hazel gundam. The scale wasnt listed on the site, and i was wondering if someone could help me with the scale of the action figure.
Here's the link to the MSIA gundam:
http://www.gundamstoreandmore.com/ban945810.html

I thought i read somewhere that the MSIAs were 1/144, but i cant remember where or if i even saw that. Any help would be great, thanks.

Sir Dearka 2009-03-22 13:31

Played around with my gunpla a bit. Finally redoing the scene of Freedom stabbing ;)



though it is not an exact replication with shield on etc but still one gets the spirit :P

---

Now I am just waiting for them to release a MG 00. To cool to be overllooked, especially after today's episode :)

Rising Dragon 2009-03-22 13:42

Quote:

Originally Posted by Sir Dearka (Post 2290324)
Played around with my gunpla a bit. Finally redoing the scene of Freedom stabbing ;)



though it is not an exact replication with shield on etc but still one gets the spirit :P

---

Now I am just waiting for them to release a MG 00. To cool to be overllooked, especially after today's episode :)

Its a shame you couldn't complete the scene by having Freedom stabbing Impulse through the face, like in the show.

vbann 2009-03-22 13:58

Quote:

Originally Posted by MeesesGlokmah (Post 2289872)
How much you guys wanna bet that Bandai will try to milk us for more money by releasing a Trans-Am Burst 00?!?

They will one way or the other.

Sir Dearka 2009-03-22 14:12

Quote:

Originally Posted by Rising Dragon (Post 2290342)
Its a shame you couldn't complete the scene by having Freedom stabbing Impulse through the face, like in the show.

To me, the scene looked different. ABSOLUTE SHINN tryumph! :P

I just changed the pose and I thought I like it more, with the Impulse lowered a bit to change dynamics:
http://img.photobucket.com/albums/v2...l/DSCF6964.jpg

Notice the little Gilbert :P lol

justavisitor 2009-03-22 14:28

Nice one Sir Dearka XD

Also, any chance/news that Regnant will be released as HG 1/144??

LightningZERO 2009-03-22 14:58

Nope. The closest one you can get is the Robot Tamashii version

StratoSpear 2009-03-22 18:38

Quote:

Originally Posted by justavisitor (Post 2290434)

Also, any chance/news that Regnant will be released as HG 1/144??

But it's BIG!

But since there are Psycho Gundams for HGUC.

There's a chance that the Regnant gets a HG treatment.

kk2extreme 2009-03-22 18:48

i'd like destroy gundam to be mg.

GN0010 Nosferatu 2009-03-22 20:25

Another interesting Damashii item is a 1000 yen special 00 item.

Weapons pack?

Un1ver5e 2009-03-22 20:33

Quote:

Originally Posted by canti300 (Post 2290147)
Hey i was wondering if you guys could help me. I would of started a new thread but this site wont seem to let me -_- so i thought this would be the best place to ask. I recently got two gundam toys, one of which was a 1/200 scale gundam. The 1/200 scale was a bit smaller than the other toy i got, which was an MSIA Hazel gundam. The scale wasnt listed on the site, and i was wondering if someone could help me with the scale of the action figure.
Here's the link to the MSIA gundam:
http://www.gundamstoreandmore.com/ban945810.html

I thought i read somewhere that the MSIAs were 1/144, but i cant remember where or if i even saw that. Any help would be great, thanks.

Quote:

Originally Posted by GNWeapon (Post 2225563)
I have a question,

I am thinking of grabbing the Robot Damashii 0 Gundam, which is out in March I believe. As I only take in HG 1/144 kits, I was wondering, what's the size difference comparisons between a HG 1/144 and a RD model? Are they about the same size?

Quote:

Originally Posted by Scavenger (Post 2225798)
Robot Damashii should be about the same size as a normal MSIA so I think it's like 1 to 3 centimetres smaller compared to the 1/144 version.

Quote:

Originally Posted by GN0010 Nosferatu (Post 2225917)
Nope nope, Damashii figures are a good 2-3 inches taller than traditional MSIA.

The 00 Gundam and the Ahead are in scale with the EMSIA Gelgoogs, which are considerably taller thank regular MSIA.

Quote:

Originally Posted by GNWeapon (Post 2226050)
So, in short, take an example, the difference in size/height between a RD Exia and HG 1/144 Exia is?

Quote:

Originally Posted by GN0010 Nosferatu (Post 2226082)
Hard to say, there is no Robot Damashii Exia. :

This picture should help ya.

http://i96.photobucket.com/albums/l1...comparison.jpg

Some old debate involving MSIAs / RDs / HG 1/144s. I did a comparison between my MSIA Exia and the HG 1/144 one. The MSIA one seems a little shorter, but I guess it would not be wrong to say it's around 1/144.

Correct me if I'm wrong, but for the above:
MSIA - MSIA - RD - MSIA

Dan the Man 2009-03-22 20:45

Quote:

Originally Posted by Scavenger (Post 2289674)
I'm about to win an awesome Gundam figure on ebay in 3 minutes. Update in a few minutes.

EDIT:
I won a 1/60 scale Wing Gundam figure
http://cgi.ebay.nl/ws/eBayISAPI.dll?...m=370173588041

In the last minute some faggot started to bid too but I won. I paid quite a bit more but oh well.

It's the same figure as in this awful video: http://www.youtube.com/watch?v=xU2-kEQ-LTU

Oh yeah, I'm a tough Gundam pilot!


Congrats on winning the figure, but did you really have to bring up the commercial? Seriously, just hearing that guy saying gunDAM gunDAM gunDAM over and over again just gives me the heebie jeebies.

GN0010 Nosferatu 2009-03-22 20:49

Quote:

Originally Posted by Un1ver5e (Post 2291075)
Some old debate involving MSIAs / RDs / HG 1/144s. I did a comparison between my MSIA Exia and the HG 1/144 one. The MSIA one seems a little shorter, but I guess it would not be wrong to say it's around 1/144.

Correct me if I'm wrong, but for the above:
MSIA - MSIA - RD - MSIA

Yup, but to get technical, the RX-78 is the MSIA V2.

beamknight87 2009-03-22 20:50

Some pics of what most probably will be my last gunpla in a very long time, the MG WZC. Currently I have no plans to acquire any other models:
Spoiler for size:

Subarunyon 2009-03-22 21:05

Quote:

Originally Posted by Dan the Man (Post 2291094)
Congrats on winning the figure, but did you really have to bring up the commercial? Seriously, just hearing that guy saying gunDAM gunDAM gunDAM over and over again just gives me the heebie jeebies.

I actually got quite a bit of laugh from this and want to thank him for sharing :)

sx3 2009-03-22 22:40

Gentlemen.. BEHOLD

http://img19.imageshack.us/img19/3223/1237778835972.jpg

The arche exists! and its busterblade can turn into a buster rifle!

On a side note, does anyone know when the robot damashii 0 Gundam is going to be released? i think im actually going to buy it just for the sake of owning an 0 Gundam :)

LoweGear 2009-03-22 22:46

HG ARCHE!!!! HG O GUNDAM!!!! HG SUSANOWO!!!!!!!!!!!! :love::love::love:

U<3Anime 2009-03-22 22:51

Good thing I didn't buy the first 1/100 00raiser set

JHyamato 2009-03-22 23:06

Is the 1:100 new OO raiser in trans-am or normal colour? its abit dissapointing if it does not come like the HG OO raiser...

GN0010 Nosferatu 2009-03-22 23:29

http://img.photobucket.com/albums/v4...RD_HJ5scan.jpg

Looks like the jokes on me.

There WILL be a Damashii Exia.

Okamidum 2009-03-22 23:32

I can not wait for the trans am 00 gundam, Smultron and arche! :D

GN0010 Nosferatu 2009-03-22 23:34

I can't believe they'll be making the advanced GNX.

Now I don't gotta buy the GNX-III!

Okamidum 2009-03-22 23:35

I really wish Bandai would make a 1/144 regnant... :[

GN0010 Nosferatu 2009-03-22 23:36

They're making a Damashii Regnant, ain't that enough?

Sure it'll be 150 bones, but, look at that size!

LordStrike 2009-03-22 23:39

look at this XD


GN0010 Nosferatu 2009-03-22 23:39

I just posted that^ Lol.

You lazy people.

LordStrike 2009-03-22 23:41

Quote:

Originally Posted by GN0010 Nosferatu (Post 2291362)
I just posted that^ Lol.

You lazy people.

lol true that XD sorry

GN0010 Nosferatu 2009-03-22 23:46

Well, if Bandai is making a new Exia figure in Damashii form. Then I better see:

Flag
Enact
Tieren with bazooka and long range cannon type

Setsuna.F.Seiei 2009-03-23 00:39

is there a b-club conversion kit for making the seven sword 00?

and which web can i get a list of all the 00 models being released?(except dalong)

Un1ver5e 2009-03-23 00:50

Quote:

Originally Posted by GN0010 Nosferatu (Post 2291342)
http://img.photobucket.com/albums/v4...RD_HJ5scan.jpg

Looks like the jokes on me.

There WILL be a Damashii Exia.

Omg omg omg. A Damashi Susanoo.

GN0010 Nosferatu 2009-03-23 00:56

Quote:

Originally Posted by Un1ver5e (Post 2291475)
Omg omg omg. A Damashi Susanoo.

Not just yet it seems, if you look at the picture near it. We see the two beam sabers. So it's the Masurao.

LightningZERO 2009-03-23 03:45

Wow, so many good news. Arche, 0 Gundam and Susanoo and even the Trans Am Raiser are must gets!!!

GNWeapon 2009-03-23 03:56

I wonder will Bandai ever consider releasing a HG 1/144 weapons pack (featuring the additional parts for the 4 gundams), or maybe adding those to their respective Trans-Am ver kits in the future?

Ardi220288 2009-03-23 06:08

Quote:

Originally Posted by sx3 (Post 2291248)
Gentlemen.. BEHOLD

http://img19.imageshack.us/img19/3223/1237778835972.jpg

The arche exists! and its busterblade can turn into a buster rifle!

1/144 HG Transam Raiser, 1/100 00 Raiser designer colour with GN sword III, HG 1/144 Ahead Smultron, HG 1/144 Arche Gundam, HG 1/144 O Gundam, Susanowo + that damn extra equipment for other Gundam (if they sell it)

I'm soooo gonna broke this time ........... :sad:


All times are GMT -5. The time now is 03:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.