with all due respect, there was some really BAD photoshopping...:heh:

aha Yeah, I just wanted to get an idea of what it would look like.

I'll most likely keep this pose for the Freedom, didn't add the beam sabers yet, but its from the scene in Destiny where he destroys the Savior.

http://img202.imageshack.us/img202/6426/1fbc.jpg

I'm wet with excitement, and I'm not even buying it! Or a girl for that matter.:heh:

Different, up close angle:
http://img692.imageshack.us/img692/8196/1ffr.jpg

Except that it's already been released, as shown by all the review pics :heh:

Confirmation of the HGUC Gear Zulu Guards Type:



Edit:

More pics of the MG Gundam Shenlong Ver. Ka:

http://img98.imageshack.us/img98/7153/64647334.th.jpg
http://img823.imageshack.us/img823/1925/25723835.th.jpg

And the MG Gundam Deathscythe Hell Custom:

http://img573.imageshack.us/img573/5985/47203498.th.jpg

So, ummm, can anyone tell me what I could use to display MG Strike Freedom's dragoons? Really want to find something similar to the FBM parts.

Also, I feel bummed now because I just found out that wing effect wasn't for MG SF.... oh well, saved $40.

Custom HG 1/144 0 Gundam Full Saber

http://img256.imageshack.us/img256/2...5dfdea2cab.jpg

That's...not as cool as it sounds....

Compare to what the full saber can do on its own, speak for yourself:heh:

*See picture*

GPB-000/FS 0 Gundam Full Saber!

You know you want to see it in action.

That's....pretty nice actually. I reckon it fits the 0 better than the 00Q, designwise. There is a bit of a tech-gap between the suit and the GNS-IV though, and that's a little jarring

Edit: just spotted this:
Hobby No Toriko has the Full Saber package:
http://hobbynotoriko.web.fc2.com/hg-full-saber.html
Raphael does a Freddy

Does anyone have any pictures of the Harute with the wings swept backwards instead of forwards? (the link above had it with the Full Saber but didn't really get a good view of the wings) If there are none, would anyone be willing to do that and take pictures for me? I am interested in buying the Harute and would love it if it could have back-swept wings (if possible).

Thanks!

Harutes Beam rifle/claw/wing.. things..

... why are they backwards?

Because of the post above his :heh:

i have
mg strike freedom full burst mode
rg rx-78-2
mg shin musha
mg unicorn ver.ka titanium
mg sinanju ver.ka titanium
mg aile strike
mg wing zero custom
mg exia ignition mode
and mg 00 qan[t]

im thinking about spending my christmas money on pg astray red frame^^ but unfortunately that one seems to be discontinued now, at least on HLJ its listed as such... so ill have to buy it from ebay for about 20€ more XP but thats worth it, i love the design

edit: what about some kits that you guys want to be made?
personally i REALLY want the mg dynames, cherudim, zabanya, harute (that kit with light up eyes and marute mode would rock so badly...) a unicorn banshee.
a perfect grade unicorn would also be pretty awesome... with improved transformation mechanism and a light up psycho frame! that would be pretty rad^^

I'd like to see PG (though I'd be satisfied with MG) kits of the 00 movie Gundams with all of their gimmicks and light-up GN Drives, and MG kits of all the season one 00 Gundams with the same. A PG Unicorn and Sinanju would be awesome, as well as an MG Kshatriya and Banshee. A PG Hi-Nu would be amazing, and I'd also like to see a No-Scale Gadelaza.

Lets see... not including any 1/144 scales.

OWN:
MG God Gundam (Hyper Mode) http://dalong.net/re...g/mh1/mh1_p.htm
MG Master Gundam (Hyper Mode) http://dalong.net/re...g/mh2/mh2_p.htm
MG Freedom Gundam http://dalong.net/re...g/m72/m72_p.htm
MG Strike Freedom Gundam http://dalong.net/re...g/m97/m97_p.htm
MG Wing Gundam Ver.Ka http://dalong.net/re...g/m69/m69_p.htm

PG Strike Gundam http://dalong.net/re...g/p09/p09_p.htm http://dalong.net/re...g/p09/p09_p.htm
PG Skygraper + Aile Striker http://dalong.net/re.../pc5/pc5_p3.htm
PG Gundam Astray Red Frame + Bonus Kit http://dalong.net/re...g/p11/p11_p.htm + http://dalong.net/re...p11s/p11s_p.htm
PG 00 Raiser http://dalong.net/review/pg/p12/p12_p.htm

ON THE WAY:
MG Aile Strike Gundam http://dalong.net/review/mg/m65/m65_p.htm
2x MG Sword/Launcher Strike Gundam http://dalong.net/review/mg/m108/m108_p.htm

SOLD:
MG Zephyranthes Gundam GP-01 http://dalong.net/re...g/m10/m10_p.htm
MG Gundam Alex NT-1 http://dalong.net/re...g/m22/m22_p.htm
MG RX-78-4 Gundam G04 http://dalong.net/re...g/m63/m63_p.htm
MG RX-78-5 Gundam G05 http://dalong.net/re...g/m64/m64_p.htm
MG Strike Rouge http://dalong.net/re...g/m74/m74_p.htm
MG Gundam Mk-II v2 http://dalong.net/re...g/m86/m86_p.htm
MG RX-78 (G) Gundam - 08th Ms Team http://dalong.net/re...g/m27/m27_p.htm

1/100 Aile Strike Gundam http://dalong.net/re...eed/s1/s1_p.htm
1/100 Sword Strike Gundam http://dalong.net/re...eed/s4/s4_p.htm
1/100 Launcher Strike Gundam http://dalong.net/re...eed/s5/s5_p.htm
1/100 Buster Gundam http://dalong.net/re...eed/s3/s3_p.htm
1/100 Duel Gundam Assault Shroud http://dalong.net/re...eed/s6/s6_p.htm
1/100 Freedom Gundam http://dalong.net/re...eed/s7/s7_p.htm
1/100 Justice Gundam http://dalong.net/re...eed/s8/s8_p.htm
1/100 Gundam Astray Red Frame http://dalong.net/re...d/s10/s10_p.htm
1/100 Gundam Astray Blue Frame 2nd L http://dalong.net/re...d/s12/s12_p.htm

1/60 Gundam Exia http://dalong.net/re...0601/0601_p.htm

1/100 Endless Waltz Wing Gundam Zero Custom http://www.gundamsto...alwingunz1.html
1/100 Endless Waltz Nataku Gundam http://www.gundamsto...algunnatm1.html
1/100 Endless Waltz Tallgeese III http://www.gundamsto...altaliiim1.html
1/100 Endless Waltz Serpent Custom http://www.gundamsto...alsercusm1.html

1/100 Shining Gundam http://www.gundamsto...m/ban43203.html
1/100 Burning Gundam http://www.gundamsto...m/ban45188.html

PHEW! I think I got em all.

I've only built 2 non-Gundam figures: Serpent and Tallgeese. If you include 1/144 figures, I've built the Strike 8 times. If you include the 3 on the way, thats gonna be 11 total.

Thanks MoonLightShadows!

-----

Currently, I only have the Throne Eins, 1/100 Avalanche Exia, and 1/100 Kyrios. I'll be getting the Red Frame Astray soon though =D

is that kit worth it? ive seen some images and videos about it and it seems to be pretty impressive! and i like the red frame, so id really like to have that kit... but i dont want to waste that much money^^

Then you're in a bit of a bind. PG kits are always exorbitantly expensive.

Well, if I were to go back in time right before I hit "SUBMIT ORDER"... I wouldn't place the order. I like the way it looks, I'm just not "in love" with it.

I jumped on the purchase for 3 reasons:
1 - It was new.
2 - The free bonus clear parts and extras that were only available for the first release.
3 - I was itching to build something.

If I could sell it for how much I paid, plus extra, I would. I could honestly say the same thing about my PG 00 Raiser. In the 00 Raiser's case, it was the display stand that was only available for either pre-orders or first release. The clear parts were sold separately.

If you really love the design, it's pilot, it's story and anything associated with it, then yeah, definitely buy it. For me, those reasons above shouldn't have justified the $250 purchase.

MINE:
http://img221.imageshack.us/img221/9756/1ffs.jpg

haha, of course^^ but by "wasting money" i meant that i dont want to buy a bad kit. if the kit is worth it im willing to pay! look at the PG OO raiser for example. it looks great but seems to have a TON of issues! i would be very angry after spending about 300€ for it only to find out that i cant pose it well because of the weight issues.

i really like the astray and im not goig to miss the money, i got it for christmas^^
does the kit have any big issues like the OO raiser? weight problems, stuff like the wobbly GN sword III or anyhing like that?

^^^

Nope, none of that, no major issues, just small nitpicks (for me). The skirt armor will rarely get in the way. There are some pieces on the head that are pretty loose: The V-fin, has a really small tab, and just a tap would knock it off. There are 3 pieces on the back of the head that are also loose, but that makes it easier to access the LED switch. Side mid section armor would pop off sometimes.

yup I totally know what you mean *sigh*, I already messed up painting one of my 1/144 figure that I totally snapped

Hey guys, I'm building my MG 00 Qan[T] at the moment, and I cannot get the large clear green piece in the middle of the leg to stay put! I'm lining up all the notches and lines, I've carefully trimmed the piece, and it falls out every time.... Any ideas? I never had this problem with MG Exia..

I had this problem as well. Really, it's an issue with the design... you are better off trying to come up with your own kind of solution, like either cementing or adding a bit of crazy glue to the edge to add friction.

Dalong uses Tamiya for the GN Condensors

http://dalong.net/review/mg/m139/p/m139_48.jpg

same here. i didnt shave off the rest of the sprue very well to have a tighter fit but they still like to pop off from time to time... i didnt want to use glue because that tends to look terrible on clear parts

that doesnt sound too bad^^ i could live with those tiny flaws. i think ill pick it up, thanks for your input!

http://a367.yahoofs.com/hkblog/_veuU..._____DVIS2KMZG
http://a367.yahoofs.com/hkblog/_veuU..._____D_abK8BQ1
http://a367.yahoofs.com/hkblog/_veuU..._____DSfchHAH6
http://a367.yahoofs.com/hkblog/_veuU..._____DQA4o7BJb
@CYBERGUNDAM BLOG

3,800Yen!? That's quite steep! Considering there's not much difference between the no grade version and this besides the additional inner frame. Most likely pass and wait for the HeavyArms and Sandrock. ShenLong was never really part of the 'Wing boys' imo.

Eat your heart out TV version. :D

Here is a tip.. Use white glue on the clear parts it will dry clear and you wont get that fog look when you use modellers glue or crazy glue. Just make sure you even out the white glue around the clear plastic.

i didnt really want to mess with the clear parts at all :P im not exactly the most handy person on earth and i didnt want to buy new glue just to put 2 pieces in place... well, 4 since the exia had the same problem.
it stays in place now fairly well, thats ok for me^^
but thanks anyway! ill keep that in mind!

YEAH! Finalyy!!!! MG Shen Long. Wufei all the way!! My very first favorite Gundam character. He is a friggin bastard but that's why I basically loved him :)

Impatience courses through me where a normal human would have blood.
In people's esteemed opinion, would it be worth it to get more than one of these?

Finally got around to finishing up my MG Wing Gundam Ver. Ka

http://img28.imageshack.us/img28/9018/screenshot02y.jpg

Took a look at it the other day cuz I was thinking about picking up the Wing kits that were and are being released. When I saw it, I noticed there was alot of unfinished work. Missing some panel lining and needed decals. Damn this kit had so many decals, especially the dry transfer ones. I had to repanel line just about everything cuz the old ink was fading.

well its a ver.ka kit, they always have a ton of decals, seals and dry transfers^^
the unicorn ver.ka comes with what feels like a bazillion decals XD but in my opinion they usually look better without them. i apply a few important dry transfers but thats usually it for me.

^^

Well this is my first and only Ver. Ka kit.

Even though it doesn't say Ver. Ka on the box, it looks like MG Deathscythe has the same amount as well. Probably because it is based on Ver. ka.

:heh:

I liked the TV version but that is just amazing.

I was Curious, I got the GN Arms Type D. How should i paint just the GN Missles but keep the frame there sticking out of white? probably Tape it up somehow? i havnt painted anything so small/precise before :heh: Thanks

Jesus H Christ!

http://gundamguy.blogspot.com/2010/1...fer-by_28.html