um i bought 1/100 savior some 2yrs back or rather but anyway,

um it is a good kit, nice detail

however the arms have pretty standard articulation, not bad but not near the best an NG has to offer, um the hip joint where u put the legs on doesnt have much mobility side ways, that is prolly the worst part of the kit but it still stands pretty well n every thing prolly better on a stand but yeh i just kno it has bad articulation there. i prefer the 1/144 Savior ><


6/10 id rate the articulation of the kit

8/10 for its detail

oh yeh kool gimmicks with the gun and the v-fin

Can someone post review and thoughts about the HGUC Nu Gundam? Its almost the price of an MG, so I wonder is it worth it or not.

i have the kit, personnally i find is meant for MA mode as MS i feel is kinda look too weird with the proportion though the gimmicks are great

Is a great kit for a HGUC. There's some internal frame for it & is a lot more movable than its MG counterpart

I have the kit, and I find the arms to be very disappointing. Due to the transformation, the shoulder lacks articulation, and the arms seem somewhat stubby.

Thanks for the opinion. Hmm....I guess i'm not buying the Saviour.It seem many transformable gundam model kit have many problem. Even the Kyrios have it to ,it leg is a little bit loose when transform to MA mode. Judging from my experience of course.

I bought the 1/100 Savior for my friend's birthday ;) I think it's a decent kit. A must-have for those who buy the models not just for gimmicks ans poseability, but mainly for appearance as it looks pretty cool IMO. And if you are an Athrun fan, you just cannot miss it.

Your word has influence me,fortunely I'm Athrun fan.I only don't got Aegis & Justice.:( I just don't exactly know why I'm attracted to it, this feeling come when I saw Strike & Astraea long ago.Maybe I'm fond to red MS. Anyway I'm buying it after I seeing 00 full lineup & it will my next year project.:D

Just you wait Saviour, I'm going after you.:D

Beats me, that's what Lightning Zero's translation says.

The GN Shield Bits support Beam Guns being attached to them. We have no idea what these Beam Guns look like, or how they're installed. It's probably going to be a 1/100 feature. After all they're not going to give away all the gimmicks of the Gundams this early. Gotta sell more models! :D

hmmmah yeah, maybe the guns can be swapped on and off the Bits

I finally finished building my Exia, and all I can say is that its a great model kit! I've found a few flaws but all in all it's still wort getting.
Since my local hobby shop just restocked some more gunpla, which should I buy first:
-1/100 Trans-AM Exia
-1/100 Avalanche Exia
-MG Gundam Ver. 2.0
possibly within 2 weeks I could buy any one of these. Strangely I have a sudden urge to collect all Exia kits except the FG.

Got my master grade infinite justice, for the first time ever we get a infinite justice model with green parts on the runner :heh: . Dont know what the download code is for yet, maybe another MG phase video.

What kind of Exia do you already have? Avalanche has the parts for both a normal 1/100 Exia, and the Avalanche Exia parts. Trans-AM Exia, I believe, is just a different colored Exia. My local hobby shop had both, but the Trans-AM Exia was $70!!!

If I was you, I would get Avalanche Exia. I have it and love it!

i have both exia which you mention & both are nice. MG Gundam v2 is a good investment on it though i myself have not fix yet.

Well I've got the Avalanche & Exia.The Trans-Am Exia is just a red metallic colored Exia,but it shoulder can move like in the anime. MG Gundam ver.2.0,man that is my dream kit.;)

Anyway I think buy those 3 if you are Gundam fanantics or buy Avalanche & MG Gundam.:D

http://bbs.cnmsl.net/viewthread.php?...extra=page%3D1

00 Gundam + Stargazer :D

that looks kinda cool

I'd buy it.

What the,it that 00? I can't believe it,a total expression of 00 fan.:D Anyway what up with that dinosour sticker.I wonder where that guy get it.:heh:

Well, I'm kinda aiming to get every Exia kit because for one thing I like all of the different Exia appearances Trans-AM, Avalanche, the Standard Exia, and even the Original roll out colors. Anyway since I got a message from my local hobby shop, seems that the MG is cheaper than the Trans-AM Exia, so I'll just be buying the MG for now and get the Trans-AM and Avalanche Exia's during the Christmas sale or maybe by Jan-Apr.

you got the same thinking as me except that now i dont have BB Exia & FG Exia. Gonna collect all ver of 00 gundam also :heh:

http://bandai-hobby.net/plamo/all/kit/56906_k.jpg
•JPN retail 2,800 JPY

•A 1/100 scale model of the "00 Gundam." GN Drives on both shoulders light up!
•GN Drives incorporate integrated light units that require no wiring work, and they light up at the flip of a switch.
•Features even easier to build construction that combines both style and posability.
•Upper thigh joint system uses a swing-action construction that, in combination with rotating thigh units and posable GN Drive units, allows the kit to take famous poses from the show.
•Weapons include two GN swords and two GN shields.


http://bandai-hobby.net/plamo/all/kit/56907_k.jpg
•JPN retail 1,600 JPY

•A Gundam with a face on its back! The "Seravee Gundam" from "Mobile Suit Gundam 00" joins the HG series!
•Back unit can open to replicate "full drive" mode to reveal a movable face.
•Included GN Bazooka II can be combined with GN Cannon to replicate Burst Mode.


http://bandai-hobby.net/plamo/all/kit/56657_k.jpg
•JPN retail 1,200 JPY

•The Ahead, cutting-edge Mobile Suit of the "Arrows," joins the HG Series!
•Distinctive chest pattern utilizes a two-layer construction of translucent parts covered by opaque parts.
•All joints and back thrusters are flexible allowing for a variety of dramatic poses.
•GN Rifle can be converted into a long-barrel type.
•Includes GN Rifle, GN Shield, GN Beam Saber, and two anti-personnel "automatons" with container unit.

http://bandai-hobby.net/plamo/all/kit/56655_k.jpg
JPN retail 4,500 JPY

•The "White Wolf" of the MSV series, "Shin Matsunaga's Zaku," gets a Ver. 2.0 overhaul.
•Utilizes the standard Zaku Ver. 2.0 body for superb proportions and full action posability.
•Leg units feature abundant mechanical detail that showcases the progression of the design of the Mobile Suit.
•Includes Zaku machine gun, Heat Hawk axe, and prototype bazooka with ammo cartridge.


http://bandai-hobby.net/plamo/all/kit/56947_k.jpg
•JPN retail 4,000 JPY

•A limited-edition version of the Ver.2.0 MG Gundam Mk-II that was packaged with the "Mobile Suit Zeta Gundam" Blu-Ray DVD set.
•Leg joints feature adjustable extension, allowing the kit to take dramatic action poses from the series.
•Chest unit and leg units are built around a movable frame, just like in the series.
•Includes a beam rifle with exchangeable magazine, Hyper Bazooka, retractable shield, two beam sabers, and Vulcan pod.


http://bandai-hobby.net/plamo/all/kit/56948_k.jpg
•JPN retail 4,000 JPY

•A limited-edition version of the black Ver.2.0 MG Gundam Mk-II that was packaged with the "Mobile Suit Zeta Gundam" Blu-Ray DVD set.
•Leg joints feature adjustable extension, allowing the kit to take dramatic action poses from the series.
•Chest unit and leg units are built around a movable frame, just like in the series.
•Includes a beam rifle with exchangeable magazine, Hyper Bazooka, retractable shield, two beam sabers, and Vulcan pod.

http://bandai-hobby.net/plamo/all/kit/56654_k.jpg
•JPN retail 1,800 JPY


•The mass-produced Geara Doga, descendant of the Zaku series of Mobile Suits as seen in "Mobile Suit Gundam Char's Counterattack," joins the HGUC lineup!
•Utilizes new polycaps that allow for high posability while supporting the oversized frame.
•Includes beam machine gun, beam axe with two types of beam effect parts, pick, four "Sturm Faust" launchers, and shield.
•Includes both normal and commander type head parts.

hmm...the 1/100 OO wont come with a pair of beam sabers ? :(

In what way are those MK-II Gundams "Limited Editions"? They look completely identical to their normal Ver 2.0 MG counterparts....

i say with the 0 Raiser package......:rolleyes:

The kits have a gloss finish.

Plus a set of metallic decals....

I got a question, where is 00 GN Drive light switch?:confused:

How long does it usually take for a MG to come out for a series? I'm still waiting for a MG Exia.

like a year or so

see here

Oh,there it is. I hope somebody will buy Seravee to see if it had Nadleeh 2.0 hiding in it.:heh: Oh,can't wait for Mr.Bushido Custom Ahead kit,hopefully it will be release same month as 00 Gundam.:D

Pass for the 1/100 00 Gundam. I will wait for the 0 Raiser set

I've one question,if I buy 00 Gundam & then 0 Riser would it fit the back of 00 Gundam?:confused:

I want to buy them separately in case something happen.:D

Of course it'll fit, no reason they believe they won't. The separate 1/100 0-Riser kit is the same 1/100 0-Riser they'll provide with the 00 Gundam + 0-Riser set, just sold separately.

I need some opinion,which one is better Strike I.W.S.P or Strike E I.W.S.P Lukas O'Donnell?:confused:

Today I saw it at some model kit website,I got this feeling again.;)
It is for my next year project,any info or suggestion is appreciate.:D

Strike E I.W.S.P Lukas O'Donnell got more weapons than Strike IWSP :heh:

even if seravee has a nadleeh hidden beneath it wouldnt be revealed on the 1/144 like Virtue and Nadleeh are separate kits then the 1/100 had both ><