AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Butagami 2011-02-26 19:12

Quote:

Originally Posted by kakakka (Post 3506915)
So what's wrong with the MG Shenlong again? The details?

Also about the D-Hell, I'll gladly take it if that's the only problem.

The lack of panellines isn't a bad point in my view. going by my Wing Zero, the old wing-kits were a bit overpanelled, if you know what i mean. and they aren't deep enough... so this is an improvement.

Sworra 2011-02-27 02:14

Here is a pic of D-Hell old 1/100 scale to help with measurements.. They are all same size when they came out long ago in 1/100 scale i also have Wing Zero in the old 1/100 scale and its head to toe same length but not with the packs. So its 17cm up its shoulder, 16.2cm to its V fin on D-Hell.

http://img641.imageshack.us/img641/7481/img0119bt.jpg

Appel 2011-02-27 08:14

that seems about right to me, the official size of the deathscythe hell EW is 16.3 meters^^
i wonder how tall the new MG is

velocity7 2011-02-27 14:36

http://www.happinetonline.com/NASApp...=4543112699145

Okay, this says one LED unit is included, and optionals have to be purchased. However, it says that four LEDs are needed. I understand the other GN drive requiring a single LED, but how many LEDs have to be actually bought? Where do the other two go? And is it a total of 4 LEDs we're talking about here, or 5?

Appel 2011-02-27 15:24

Quote:

Originally Posted by velocity7 (Post 3508821)
http://www.happinetonline.com/NASApp...=4543112699145

Okay, this says one LED unit is included, and optionals have to be purchased. However, it says that four LEDs are needed. I understand the other GN drive requiring a single LED, but how many LEDs have to be actually bought? Where do the other two go? And is it a total of 4 LEDs we're talking about here, or 5?

thats weird... and why would they just include 1 LED unit? the GN drives can light up, thats for sure, just like the NG version. but why just one LED? that would look terrible...
i could see the head lighting up, both the regular NG version and the designer color version have a cavity in the torso where you can put LED units (the regular NG has to be slightly modified though). plus, with the head they were doing a pretty good job with light tunneling. they could keep the head the way it is!

but thats just 3 LEDS... where could they put the other ones? :O

Sir Dearka 2011-02-27 15:44

Shen Long is an absolute must. And I see that I should start saving for Epyon :)

MakubeX2 2011-02-27 16:42

Quote:

Originally Posted by velocity7 (Post 3508821)
And is it a total of 4 LEDs we're talking about here, or 5?

5 actually.

Quote:

Originally Posted by Appel (Post 3508874)
thats weird... and why would they just include 1 LED unit? the GN drives can light up, thats for sure, just like the NG version. but why just one LED? that would look terrible...

I believe I first mentioned this a page or 2 back. And did people take notice ? Any way, this is Bandai as expected for any running business. Keeping the cost down and maximising the profit margin. They didn't give much LEDs out for the rest of their regular releases for the MG OO lines. So why should they start now ? It's already kind enough for them to give one single LED for the MG OO-Raiser.

Quote:

but thats just 3 LEDS... where could they put the other ones? :O
Twin Drive-2X
Condenser-2X
Head-1X

There you have it.

Illsteir 2011-02-27 18:31

Quote:

Condenser-2X
Or 0-Raiser Wing Binders-2x

MakubeX2 2011-02-28 07:19

Quote:

Originally Posted by Illsteir (Post 3509092)
Or 0-Raiser Wing Binders-2x

http://img143.imageshack.us/img143/6...8888805856.jpg
http://img812.imageshack.us/img812/2...8893405363.jpg

velocity7 2011-02-28 08:11

Anyone notice that the clear blue part that was on the GN Sword II has been changed to a clear green ala Seven Sword style? Also, how are they going to fit the head LED?

I do notice that the back where the 0 Raiser fits has been modified... it looks like the 0 Raiser's angle is more parallel with the body, making it take less real estate than it should be (unlike the HG models where it stuck out).

Illsteir 2011-02-28 09:16

Quote:

Originally Posted by MakubeX2 (Post 3509834)

So we have 1 for the head, 2 for the GN Drives which can be removed and be inserted in the Particle tanks and another 2 inside the binders.

Chiu_fan 2011-02-28 09:21

Quote:

Originally Posted by velocity7 (Post 3509875)
Anyone notice that the clear blue part that was on the GN Sword II has been changed to a clear green ala Seven Sword style?

I think Bandai just got lazy there since most of the clear parts used are in clear green.

MakubeX2 2011-02-28 09:25

Quote:

Originally Posted by Illsteir (Post 3509955)
So we have 1 for the head, 2 for the GN Drives which can be removed and be inserted in the Particle tanks and another 2 inside the binders.

No. LEDs for the Drives and Condensers are mutually exclusive, so there's nothing left for the binders.

Illsteir 2011-02-28 09:28

Sigh, BANDAI has done it again.
So how does the light get to the binders? A clear piece that acts like a piping?

LoweGear 2011-02-28 09:40

If you're not gonna use the L-Condensers though, then you only need 3 LED's instead of five :heh:

velocity7 2011-02-28 09:41

Quote:

Originally Posted by Chiu_fan (Post 3509966)
I think Bandai just got lazy there since most of the clear parts used are in clear green.

Though to be honest, I did prefer the clear green over the clear blue.

Quote:

Originally Posted by LoweGear (Post 3509981)
If you're not gonna use the L-Condensers though, then you only need 3 LED's instead of five :heh:

I'd rather just swap between the two rather than have to worry about having several LEDs at once. Also not too sure whether I want the head LED or not.

Kuroi Hadou 2011-02-28 09:42

Quote:

Originally Posted by Illsteir (Post 3509971)
So how does the light get to the binders? A clear piece that acts like a piping?

All they have to do is design a channel in the mold; after that pre-elementary physics takes over.

Chiu_fan 2011-02-28 10:05

About the MG Deathscythe Hell Custom, will they eventually fix the defect?

And are there any new announcements about the 00 movie kits?

velocity7 2011-02-28 10:54

So where exactly will 00 Raiser's head LED be? Seems like it has to be in the backpack to allow some room for the cockpit to open, along with some sort of clear piece channel...

That, or the LED has to be totally different from the other LEDs.

More pictures after the jump:

StrikeFreedomV2 2011-02-28 11:18

God, the 00 MG looks so good. I already ordered 2 of it on hobbysearch, so I can have both 00 Gundam and 00 Raiser in 1/100 Glory :D

One a side note: I recently build a lot of HGUC kits, like the Kshatryia, the Marasai, the Gundam MK II, the GP01 and GP02. I would like to recommend them to anyone that is in interested in the UC time line. The quality and articulation of the MK II surprised me the most, considering it's age.


All times are GMT -5. The time now is 16:12.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.