AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Chiu_fan 2014-08-09 12:11

Quote:

Originally Posted by SonicSP (Post 5208874)
I haven't checked this thread in awhile. Now that I'm back home and continuing Gunpla I should probably check it more often.

I'm currently trying to build the RG Exia Repair kit right now but this box has me puzzling.






Well, basically I'm not exactly sure what to do. This is the first time that I'm working on a modification kit.

It's basically that black box text there. It has the numbers of the instruction set which I assume are from the main RG Exia kit.

Is it basically telling me to "skip" those parts of the main text as I'm building my RG Exia or is it telling me to "reverse" the things I'm done on those steps. Considering the nightmare of a time I had on building the RG Exia....well I'm trying to avoid the same pitfalls especially since this is more limited in supply and way more expensive (relative to the amount of material you're actually getting)


I have a spare RG Exia kit anyways (specifically for the purpose of having an RG Exia Repair), so I'm fine building from scratch or modifying my existing one. But regardless I want to get this right so I'm trying to be as careful as I can here since.

I can understand the pictures mostly fine but I get the feeling that instructions are telling me something important before I'm supposed to proceed to the picture section so I'm trying to be as careful as I proceed, hence the thread. Anybody worked on a modification kit before?

It's basically telling you to follow the original manual and make changes on some steps where it is needed. Example, once you reach step 01-2, refer to the exia repair manual to make the appropriate changes.

I have this kit as well. It's not that hard to understand how to build it really.

Bonta Kun 2014-08-09 15:26

Quote:

Originally Posted by Wild Goose (Post 5206507)
So, I did a bit of panel lining tonight.

This is the GM Command Space Type, which was the 2nd kit I built. Back then, I still sanded down parts and shit... also the stains are from humidity. tl;dr, flat coat ASAP your white MS. I don't seem to have this issue with my Stark or ECOAS though...

Dynamic tag cannot be rendered. (PrintableThread)
Verdict: Stick to Gundam panel lining marker, folks. I found that the inkflow was not as consistent, and could be irregular at times, whereas inflow on my gundam marker was steady and constant.

Also I've been trying out my Tamiya files. OH MY GOD. WHAT KIND OF TAMIYA SOURCERY IS THIS?! I just rub rub rub and the nub is FUCKING GONE. So fucking worth it. Very much looking forward to using all my toys on my MG Jesta next year.

Also MG Jesta + Red LED = EXAM Jesta. This is now my headcanon.

I see you finally got a cutting mat, good stuff!

I'm a stickler for this type of thing, always say if your gonna do something got to do it properly:p

Oh and nice panel lining:)

Skye629 2014-08-09 19:33

O god this is too funny

http://1.bp.blogspot.com/-etaK6kQb5h...ozenep7012.jpg

Blazer-X 2014-08-09 20:48

You mean to say excellent capitalization on Bandai's part. Gives you one less arm, but more correct colors. Looks like the average straight builder might just need to bite.

ZeroXSEED 2014-08-09 21:00

Did they ever correct the color of the original rozen zulu?

What's the problem with changing color formula anyway...

Providenceangle 2014-08-09 22:18

I've been away forever and when I come back... It's old I know but the Hi Nu ver ka is gorgeous... Bandai is really trying to make me give up, and end up living on the streets with my gundams lol

MoonLightShadows 2014-08-10 16:00

it looks like in the runners the Rozen Zulu still almost comes with pieces to possibly give it right arm.


http://www.dalong.net/review/hg/h185/p/h185_runner.jpg

Skye629 2014-08-10 22:59

Quote:

Originally Posted by MoonLightShadows (Post 5210761)
it looks like in the runners the Rozen Zulu still almost comes with pieces to possibly give it right arm.


http://www.dalong.net/review/hg/h185/p/h185_runner.jpg

Check out my post on the last page closer to he bottom. It seems like you can

X207 2014-08-10 23:41

Quote:

Originally Posted by Skye629 (Post 5209612)

lol, are you sure Meer Campbell wasn't present for the paint scheme planning? she already has a Zaku so why not add 2 more MS to her collection.

Wild Goose 2014-08-11 21:37

Quote:

Originally Posted by Bonta Kun (Post 5209343)
I see you finally got a cutting mat, good stuff!

I'm a stickler for this type of thing, always say if your gonna do something got to do it properly:p

Oh and nice panel lining:)

Thanks!

Also, anybody use Tamiya files? I've heard that I should use some kind of thing called a file card to get the gunk out of the files, and that I should use another magical substance on the magical Tamiya files... that arecane, magical spray called WD-40.

SonicSP 2014-08-13 12:25

Quote:

Originally Posted by Chiu_fan (Post 5209075)
It's basically telling you to follow the original manual and make changes on some steps where it is needed. Example, once you reach step 01-2, refer to the exia repair manual to make the appropriate changes.

I have this kit as well. It's not that hard to understand how to build it really.

I've got a question. Aside from coming from the original RG kit, was exactly does the "faded" parts means? Because from what I can see, you're supposed to omit them sometimes, like in 01-4 but in some parts like Section 9, I'm pretty sure you're supposed to use them in the construction of the GN Sword.

Chiu_fan 2014-08-14 09:33

Quote:

Originally Posted by SonicSP (Post 5213935)
I've got a question. Aside from coming from the original RG kit, was exactly does the "faded" parts means? Because from what I can see, you're supposed to omit them sometimes, like in 01-4 but in some parts like Section 9, I'm pretty sure you're supposed to use them in the construction of the GN Sword.

The faded parts doesn't mean that they should be omitted. It just means that they are the exact same part you would use when building the regular Exia.

RRW 2014-08-16 00:18

Dynamic tag cannot be rendered. (PrintableThread)

Obelisk ze Tormentor 2014-08-16 00:37

^ My eyes!! Cannot un-see!!!

Skye629 2014-08-16 20:37

Quote:

Originally Posted by RRW (Post 5216594)
Dynamic tag cannot be rendered. (PrintableThread)

I will regret clicking to see that image for the rest of my life

Blazer-X 2014-08-16 20:59

Just got this thought while rewatching Unicorn for the Nth time: given its size and Unicorn's popularity, Kshatriya (and Repair) might eventually become a RE:100 if Nightingale and Gundam Mk 3 does well. Totally random thought, but well... *shrugs*

Skye629 2014-08-17 18:23

Quote:

Originally Posted by Blazer-X (Post 5217756)
Just got this thought while rewatching Unicorn for the Nth time: given its size and Unicorn's popularity, Kshatriya (and Repair) might eventually become a RE:100 if Nightingale and Gundam Mk 3 does well. Totally random thought, but well... *shrugs*

totally possible, since a MGs inner frame more or less kills the prospect of it getting a functional MG kit. RE:1/100 is so much more likely

LoweGear 2014-08-22 18:24

HGUC Crossbone Gundam X1 :eek:

http://i.imgur.com/AtMTzZYl.jpg

Well, that was expected after the Crossbone Gundam Maoh, but still nice to see.

And we have the HGBF Build Burning Gundam, with LOTS of effects parts:

http://i.imgur.com/3wyJvIll.jpg

ZeroXSEED 2014-08-22 19:27

So they went for LBX route with simple unit + flashy effect

Also, dafuq? 4 pair of hands?!

wavehawk 2014-08-23 04:26

Domon called, he wants his effects parts back.


All times are GMT -5. The time now is 20:52.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.