Quote:
but eventually it would come out, i'm guessing perhaps sometime next year as we already have the 1 Gundam being released this year |
Quote:
Quote:
Quote:
http://img362.imageshack.us/img362/1136/gadessa1uk5.jpg |
Quote:
ive thought of that escape pod sequence also. i guess the back opens up when they hit the eject button and the cockpit slides into places and they get the hell out of the battle zone. might you also have a picture of the gaddess designs as you have with the gaddessa as in your post? |
Hey everybody, I guess years ago I made account with god knows what email so here is my new account :) Sense the forum was titled Gundam models i saw it appropriate to ask my question here though somebody please re-direct me if I am wrong.
My question has most likely been asked but I wouldn't know what page its on so bare with me. I am taking up Gundam Models as a hobby, It looks like a lot of fun and a good use of time and brain power, better than other things I must say. Im VERY fortunate that my sister has a great air compressor she is letting me use from her art school days, so I have that, she also bought me my first kit while she was in Japan, a RX-78 1/144 scale HG so I guess what better to start with right, ive searched dauntlessly for painting information but have gotten nowhere. This is probably getting rather long....anyways I will be getting gray and black gundam markers for panel lining, but my question about painting still stands. Where do i get the correct color scheme i see in my manual for these, i guess I can get it mixed considering my freind who reads japanese translated the combination, but I have seen Mr. Color as well as Gundam paint such as "Gundam Red, and Gundam Blue" however these can't be universal colors, the same blue EVERY gundam that had blue on it. Basically is it really just that simple, i HAVE to mix the paint as it instructs? Or could i use the paint from gundam markers? Im very new to this world but hope to become and expert!! And maybe share my creations and pictures here too. I will be asking more questions later, but for now paints my biggest issue. Please Advise? Thanks everyone, looks like a great site :) |
@ Deliverance, I am not sure if this is where this should be discussed bro as i am new here too...in regards to your question in panel lining it is better if you use the wash method. Gundam markers are just too thick ( even the fine one ) for panelling and is difficult to control...as with your painting question, I paint my kits myself, but usually in custom colors. basically you try to mix it as close to the box art...follow the instructions but that that not assure you of the exact results...so basically it's trial and error bro.
BTW, here is my blog...hopefully you could get a few tips here - DC23 mech arts good day and happy modelling! :D |
^ dc23 definitely knows what he's talking about. his kits are astonishing. haha but yeah as far as painting goes, just mix colors until its basically right, it's not like everyones gonna hate you if you're colors are slightly off. and washes are far greater than gundan markers and I find it easier than using a pen too. have fun!
|
Quote:
Quote:
Baring that, unless you have an absolute need to match the color according the the guide 100%, your choice is to translate the color guide, get the colors, and mix according to the percentages. I recommend just getting a bunch of colors you like, and paint the kit how you think it should look. There are a million shades of white, just pick one. If you want more tips on model building, I have a few tutorials written with pictures for most, and videos for some: http://gamerabaenre.com/toolsandtechs.htm Otherwise, you can also check out some of the build progress pages I have that detail my builds: http://gamerabaenre.com/in_progress.htm Though some are incomplete, but a good number are start to finish. Hopefully it'll help you out a bit and give you some ideas and further welcome you into the hobby. |
Does anyone use the gamesworkshop paint gun (whatever it's called) I don't know wether I should buy it or not, it seems decent value, I'd have to buy the gas, are spray cans good, a ny problems with them?
|
Not sure with the gun...but there paints are really good! :D
|
Thanks very much on the tips, especially about the new way to do panel lining, i will keep that in mind, I thought gundam markers were the way to go.
Honestly I have always been sort of a perfectionist, perhaps its my weakness and thats why I just want the colors to be perfect. ^_^ I use to collect American MSIA's but now....well im not to thrilled about spending 30$ minimum for an action figure regardless of series, especially a 130$ Tallgeese III, i remember the days when i could go into KB toys and get it for 4.99$ How sad how the gundam empire here has fallen. I just wish there was a kit for every mobile suit in a series....I noticed there's still not kits for some, yet there is over 10 RX-78 kits, (not bashing RX-78) :D Ok, so I pretty much got my answers from paint, haha as it turns out, as I stated earlier, My freind knows Japanese so he can translate any part of the manual I wish, so this will come in handy for the paint. As it turns out, were going to Japan next year, Hobby shop heaven apparently ^_^ and gundam paradise ;) So my next question is about shadowing. I absolutely love the effect it gives the mobile suit. Im under the impression your suppose to use 75% thinner and 25% paint? Can somebody who shadows (preferably light shadowing, to much is simply not my taste) care to advise? I also wouldn't know if you use black or gray paint for shadowing, or does it consist of layers? I thought it was just very weak paint that barley shows up, thus giving it the shadow effect and could be done in one layer....Once again I really don't know :) Another question is about seams....I remember building 3 model kits as a kid, of course I didn't do anything with them, but I noticed that usually where the legs connect on 1/144 scales and usually 1/100 HG you get this problem, Ive been told its only on old kits, but do i use glue then sand down the ooze to make it smooth? If so, how do I go about this sanding process? Im sure you don't have to glue perfect grades, or even master grades at that, but does the seam problem only occur in the scales I mentioned? Please Advise, and thanks for the help guys, I really appreciate it like no other :) |
There are two kinds of shading bro...preshade and post shading...
preshading is painting the parts with a dark color then spraying a lighter shade on the middle areas of the part. post shading is using a very thinned darker color and spraying on the edges of the part being painted. I use Tamiya smoke for this job and it is basically a clear black. Others might have a better explanation about shading and might have tutorials for it. As with seam line removal, I use either Tamiya cement or Tamiya thin cement...same effect different method. here is my tutorial about seam line removal - SEAM line removal |
BTW, enjoy your trip to Japan heaven bro!:D:D:D
|
I bought some black spray paint for when I build my Masurao, it's gonna be good =D I've been hand painting an Ahead too which is about 50% complete and I've made plans for a diorama.
The diorama will be the outside of a space colony and I'll build in a stand to it so I can display any of my 1/144s on there. I'll probably add some men in spacesuits. Also I don't know if I should buy air brush seeing as I've found where to buy Tamiya paints, I plan to buy the Kshatriya & a Hy-gogg and I wouldn't want to hand paint a large model like the Kshatriya... Anyone know any good or cheap airbrush brands? P.S I like DC23's blog it's great xD |
Use your imagination!!
Quote:
PEACE |
Quote:
PEACE |
Quote:
PEACE |
how long would it usually take to mix an acrylic paint that hasnt been used in 1-2 years? i have 3-4 acrylic paints and it seems like it will take a while to mix the thinner in the jar with the actual paint?
atm ive done all the blue areas on my garrazzo, all thats left is to dull the finish on some parts and paint some smaller details. |
Quote:
Quote:
In other news, here's what I've been working on for the past week or so: Spoiler:
|
/
Quote:
|
I use Tamiya acrylics and add 10% of Tamiya Acrylic Paint retarder...it somehow makes the Acrylic paint almost similar with lacquers in terms of ease of use and performance.:D
I have better finished kits when I started using Tamiya Paint retarder...here is my first painted Gunpla with Tamiya paint retarder mixed with Tamiya acrylics - PG Zeta ver DC23 |
All times are GMT -5. The time now is 17:20. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.