AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

LoweGear 2008-11-20 10:18

Quote:

Originally Posted by duotiga (Post 2064196)
frankly speaking...most of the seravee gimmicks has been out so no point leaking the manual to see whats in the content.....unless they announce something out of the blue like the HCM-Pro

boxart reveal, how the gimmicks works reveal....so is there anything else left out for the HG ver?

The Seraphim System? :uhoh:

Remember that we didn't know of the GN Shield Bits until we got manual scan leaks of the HG Cherudim. So who knows what gimmicks we'll see when they release it.

duotiga 2008-11-20 10:38

Quote:

Originally Posted by LoweGear (Post 2064205)
The Seraphim System? :uhoh:

Remember that we didn't know of the GN Shield Bits until we got manual scan leaks of the HG Cherudim. So who knows what gimmicks we'll see when they release it.

i still feel they are defeating the purpose of releasing the kit @ a later date. Why?

1. 00 being air in sg for 1st season (3rd episode tmr)
2. Bandai come in AFA 08 in sg this weekend
3. the extra gimmick might come out as a seperate kit ( eg: HG Nadleeh, HG 0 Raiser, HG Archer)

this is my stand that seravee be out on the 21st.

LoweGear 2008-11-20 10:46

I'm under the impression that the AFA08 is a special event, and therefore since the release dates are so close they're selling the kits there to promote them. However, the general release date for the common stores online and offline would be later.

Nothing wrong with Seravee being released early, just don't want to get my hopes up by expecting it tomorrow, considering the model kit release pattern so far.

Knight_SV 2008-11-20 16:11

i'm planing of modifying the 1/100 00 gundam to make it have a waist joint, but unfortunately i'm still a new to scratch-build things.... are all the this i need is an existing waist unit from another kit and a putty?

justsomeguy 2008-11-20 16:49

Quote:

Originally Posted by Knight_SV (Post 2064718)
i'm planing of modifying the 1/100 00 gundam to make it have a waist joint, but unfortunately i'm still a new to scratch-build things.... are all the this i need is an existing waist unit from another kit and a putty?

http://www.geocities.jp/hetare_d_max...en_custom.html
This guy here modded his 1/144 Alt Eisen to have a waist joint, among other things.

Ideally, I would think you need putty, joint parts, a large polycap, paint, and the proper tools. Given that you're new at scratchbuilding, I would suggest practicing before you make changes to the waist. You also need to decide on whether to make a ball-socket joint, or a straight rod joint.

duotiga 2008-11-20 18:51

Quote:

Originally Posted by LoweGear (Post 2064242)
I'm under the impression that the AFA08 is a special event, and therefore since the release dates are so close they're selling the kits there to promote them. However, the general release date for the common stores online and offline would be later.

Nothing wrong with Seravee being released early, just don't want to get my hopes up by expecting it tomorrow, considering the model kit release pattern so far.

special event for AFA 08 yes, will be releasing, but for common stores in SG is abt 1mth late each kit releases.

I trust the Bandai website release launch dates. We shall later see in hobby search for the release shall we?

PzIVf3 2008-11-20 23:12

http://img509.imageshack.us/img509/7...8998683dz2.jpg

Ottocycle 2008-11-20 23:18

Quote:

Originally Posted by PzIVf3 (Post 2065483)

So that's what the Kyrios Gust got turned into...:p

Kelrys 2008-11-21 00:10

I completed my HGUC Kampfer recently and I'm happy it turn out so good. HGUC nowadays are really good, can I know which are the top rated HGUC kits?

Scavenger 2008-11-21 03:00

http://ngeekhiong.blogspot.com/2008/...bby-japan.html

1/144 HG O Raizer comes with shields and the sword connector.

duotiga 2008-11-21 04:58

release today

http://www.1999.co.jp/dbimages3/user...g/10076818.jpg
http://www.1999.co.jp/eng/10076818

http://www.1999.co.jp/dbimages3/user...g/10078486.jpg
http://www.1999.co.jp/eng/10078486

Knight_SV 2008-11-21 05:04

Quote:

Originally Posted by justsomeguy (Post 2064762)
http://www.geocities.jp/hetare_d_max...en_custom.html
This guy here modded his 1/144 Alt Eisen to have a waist joint, among other things.

Ideally, I would think you need putty, joint parts, a large polycap, paint, and the proper tools. Given that you're new at scratchbuilding, I would suggest practicing before you make changes to the waist. You also need to decide on whether to make a ball-socket joint, or a straight rod joint.

thanks for the tips:). i have decided to use straight rod joint from the Mg strike freedom to put on 00, so i need to buy that mg again. Fortunately it wasn't difficult to find MG Strike Freedom, either the normal or Full Burst version:) Aside from design knife, what else of the tools i must have?

and finally announced
Spoiler for 1/100 cherudim:

LightningZERO 2008-11-21 06:51

Quote:

Originally Posted by Scavenger (Post 2065750)
http://ngeekhiong.blogspot.com/2008/...bby-japan.html

1/144 HG O Raizer comes with shields and the sword connector.

Very good. Will buy the HG 1/144 00 Gundam now

Oh, interesting stuffs. According to the 1/100 00 Gundam manual (damn, that's a lot of 0s), the lack of chest orb, no back cone etc are to fit with the concept of "Destroy the rebirth" :heh:

Celestial 2008-11-21 06:56

Quote:

Originally Posted by LightningZERO (Post 2065970)
Very good. Will buy the HG 1/144 00 Gundam now

Oh, interesting stuffs. According to the 1/100 00 Gundam manual (damn, that's a lot of 0s), the lack of chest orb, no back cone etc are to fit with the concept of "Destroy the rebirth" :heh:

So they're trying to be radically different and therefore deviated from the original designs?

I would've preferred it if they remained true to the original designs, but alas, I can't do a thing about it if they want them this way.

Knight_SV 2008-11-21 07:48

Quote:

Originally Posted by LightningZERO (Post 2065970)
Very good. Will buy the HG 1/144 00 Gundam now

Oh, interesting stuffs. According to the 1/100 00 Gundam manual (damn, that's a lot of 0s), the lack of chest orb, no back cone etc are to fit with the concept of "Destroy the rebirth" :heh:

that risky however, seeing how radically change the location of the GN Drives, especially Cherudim.:heh:

justsomeguy 2008-11-21 10:11

Quote:

Originally Posted by Knight_SV (Post 2065876)
thanks for the tips:). i have decided to use straight rod joint from the Mg strike freedom to put on 00, so i need to buy that mg again. Fortunately it wasn't difficult to find MG Strike Freedom, either the normal or Full Burst version:) Aside from design knife, what else of the tools i must have?

and finally announced
Spoiler for 1/100 cherudim:

Wait, don't buy a Strike Freedom just to get one joint! You can order individual runners from www.hlj.com if you know specifically which runner you want. Alternatively, you can use parts from a hardware store, such as small steel pipe, or wooden dowel, and build a joint yourself. No matter what, you will need the putty to hold everything in place. Sandpaper would also be useful to smooth out the putty.

LightningZERO 2008-11-21 11:25

Upcoming Robot Tamashii

http://img.photobucket.com/albums/v1...up53102gt5.jpg

November:
GN Flag
Cherudim Gundam

December:
0 Raizer

January:
Ahead

February:
GN-XIII
GN Archer
Mr Bushido's Ahead
Gadessa
Turn-X

Rising Dragon 2008-11-21 13:14

Now I remember why the legs of the Gundam Throne units look so familiar. The Turn X had the leg design first! Why didn't I remember that until seeing that scan? Jeez...

GundamMeisterLockon 2008-11-21 13:16

Quote:

Originally Posted by Rising Dragon (Post 2066451)
Now I remember why the legs of the Gundam Throne units look so familiar. The Turn X had the leg design first! Why didn't I remember that until seeing that scan? Jeez...

hey dragon u think that gadessa looks like something out of code geass or is it me?

Rising Dragon 2008-11-21 13:19

Quote:

Originally Posted by GundamMeisterLockon (Post 2066457)
hey dragon u think that gadessa looks like something out of code geass or is it me?

I don't understand where these comparisons of the Gadessa to Knightmare Frames is coming from, really. Looks to me more like an Orbital Frame, but even then I'm hesitant to say it looks like that.


All times are GMT -5. The time now is 05:26.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.