AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Bashfulz 2010-04-22 07:07

Quote:

Originally Posted by Akyra (Post 3015078)
I still want a 1/100 GN Archer....hmmm

its been a long time since the last 1/100 release... =S

thinking its more likely to come bundled with the arios as a master grade pack.
:eyespin:

duotiga 2010-04-22 07:46

i wonder will they make a HG Seravee 3G =x that wld be hugmongous =x

DC23 2010-04-22 08:48

Any new MGs from the 00 series would be great! :D

gummybear 2010-04-22 09:42

Quote:

Originally Posted by Akyra (Post 3015078)
I still want a 1/100 GN Archer....hmmm

me too, but then you know bandai love wearing the ass-hat so much that you know they will just make RX78 V3.0 instead or something we don't give a damn about.... we will be lucky if they ever make 1/100 GN Archer or MG Virtue or 1/100 Gaia Gundam from GSeedD......

JC... 2010-04-22 10:21

They srs gotta release a 1/144 MS Carrier xD

RAVNEN 2010-04-22 12:23

I'm going to buy my second MG,so i need some opinion in terms of difficulties e.t.c There are 5 MG on my wishlist :
- MG Freedom
- MG Destiny Gundam
- MG Red Frame
- MG Strike Freedom
- MG Strike E IWSP

So which one should i buy..?? I already finish my 1st MG ever,the Blue Frame 2nd Revise.

Saga_CE 2010-04-22 12:45

Thanks for your tips about paint, Gamera.

One more question about extending very thin parts on Gunpla: how do you do?
I don't know how the plastic card can remain on the part with so little contact surface (on the edge of the fins!), like on this picture:

http://wonderexcellence.sub.jp/gallery/exiat/ex021.jpg

SonicSP 2010-04-22 13:56

Quote:

Originally Posted by DC23 (Post 3015225)
Any new MGs from the 00 series would be great! :D

I really want MG 00 Raiser.........but I rather have it late than have it early but sucky, especially after Bandai bothched up the 1/100 one.

After the movie, they will be both MG 00 Raiser and MG 00 Qan[t] to be desired.

Quote:

Originally Posted by JC... (Post 3015340)
They srs gotta release a 1/144 MS Carrier xD

I dont think there's anough demand for it. And something like that will be super expensive with not enough people wanting to buy one.

--
I'm hoping they'd release a Real Grade 1/144 00 Raiser one day. I love the 1/144 scale and I love 00 Raiser, so a high premium quality version would be nice for me personally.

--




By the way, have these been posted yet?:

Spoiler for HG 1/144 GN-001/hs-A01D Gundam Exia Avalanche Dash:


Spoiler for HG 1/144 CB-001.5 1.5 Gundam:


Credit goes to Homeless for the Avalanche pics and SRW for the 1.5 Gundam one.

JC... 2010-04-22 15:16

lol I was kinda joking about the MS Carrier... I really think gunpla lines should include things like tanks and other vehicles and stuff like that, Like the Zaku ground war set.

SonicSP 2010-04-22 15:35

Spoiler for HG 1/144 GNY-001F Gundam Astraea Type F manual:


Oh, and since its slightly merited in this topic, here's a pic of the HG Astraea F manual, shows some official pose for Astraea F.

Pic credit goes to Homeless and Hobbysearch.

-GN Hammer is a new weapon for the new Astraea-F from 00I sidestory.

-The NGN Bazooka [NGN Acronym for "Non GN"] is the name of the optional weapons used by the GN-X III and Aheads at the end of S2 and are also canon compatible with their HG kits.

-GN Pistols is also canon compatible with HG Dynames [crap, I bought GN Arms-D already]

-GN Hand Missile is optional equipment for Kyrios, is of course also canon compatible with HG Kyrios.

Others are Astraea's normal weapons. Wow, Bandai sure is being grateful in this release huh?

Sworra 2010-04-22 16:02

Quote:

Originally Posted by RAVNEN (Post 3015520)
I'm going to buy my second MG,so i need some opinion in terms of difficulties e.t.c There are 5 MG on my wishlist :
- MG Freedom
- MG Destiny Gundam
- MG Red Frame
- MG Strike Freedom
- MG Strike E IWSP

So which one should i buy..?? I already finish my 1st MG ever,the Blue Frame 2nd Revise.

Well in terms of difficulty being the easy one. I would go for the Freedom. That one is pretty basic. I'd say go for the Red Frame last on your list being that you just finished the Blue Frame, only difference is shoulders, and extra weapons, you would be repeating yourself if you got the Red Frame. But if you built a Blue Frame the list above should be a snap for you. So from 1 to 5. 1 being the easiest.

1. Freedom
2. Strike E IWSP
3. Destiny
4. Strike Freedom
5. Red Frame

Kitaeryu 2010-04-22 19:49

Quote:

Originally Posted by DC23 (Post 3015225)
Any new MGs from the 00 series would be great! :D

Any new 1/100 from 00 side series would be even greater!

Still waiting for a 1/100 00 Seven Swords =[


Also, my friend was asking me whether it would be smart to apply just a topcoat to a model kit that hasn't been painted. He doesn't have the time/luxury to paint his kits, and so he just panel lines it, but he also wants to get rid of the plastic look/feel to them. Therefore, can this be done by applying just a topcoat to the model kit, and how effective is it to do that?

Furthermore, is there any other ways to reduce the plastic look/feel of model kits without painting them?

Thanks in advance.

DC23 2010-04-22 23:16

Yeah a 1/100 seven swords would be great...much more if it is an MG! ;)

You are right, applying a flat top coat will give it a painted look as long as you remove the seam lines and sand the nub marks. Apply decals ( water slide ) first and apply flat topcoat...practice on an SD, you'll be amazed with the results. :D

X207 2010-04-23 00:48

im waiting for a larger scale gaddess. id like a MG gaddess (if it ever came out) but i'd settle for a 1/100.

MoonLightShadows 2010-04-23 01:31

A 1/100 Gaddess would be my favorite. I wouldnt mind 1/100 throne gundams..though that might not happen.. :p

GameraBaenre 2010-04-23 01:44

Quote:

Originally Posted by Saga_CE (Post 3015566)
Thanks for your tips about paint, Gamera.

One more question about extending very thin parts on Gunpla: how do you do?
I don't know how the plastic card can remain on the part with so little contact surface (on the edge of the fins!), like on this picture:

http://wonderexcellence.sub.jp/gallery/exiat/ex021.jpg

Done with regular styrene glue. The glue melts the plastic so it essentially welds together with the part. You should be able to find all sorts of shapes and sizes for plastic at your local hobby shop. Glue the plastic to the part, use a clamping device like a clothes pin or those paper clip thingys, and let it set up. A day later, sand the residual plastic ooze that comes out form the glue's welding process. Just take care sanding as it's a very delicate part when it's so thin.

RAVNEN 2010-04-23 05:57

Quote:

Originally Posted by Sworra (Post 3015876)
Well in terms of difficulty being the easy one. I would go for the Freedom. That one is pretty basic. I'd say go for the Red Frame last on your list being that you just finished the Blue Frame, only difference is shoulders, and extra weapons, you would be repeating yourself if you got the Red Frame. But if you built a Blue Frame the list above should be a snap for you. So from 1 to 5. 1 being the easiest.

1. Freedom
2. Strike E IWSP
3. Destiny
4. Strike Freedom
5. Red Frame

Ooo...ok thanks for the opinion. Look like i would get the MG Freedom/Strike Freedom. The Red Frame do tempting a lot...Do the MG Freedom/StrikeFreedom use screw for it shoulder joint like the Strike..?

Blue Frame 2nd Revise...Delta Form..XD:D

http://img245.imageshack.us/img245/3820/photo0802.jpg

DC23 2010-04-23 07:51

Yeah! a 1/100 Gaddess would be so sweet! :D:D:D

duotiga 2010-04-23 07:55

nw slowly waiting for 2 hg astrea type for my kyrios to do this!!!!

http://img.blogs.yahoo.co.jp/ybi/1/5..._38?1272024430
http://img.blogs.yahoo.co.jp/ybi/1/5..._39?1272024430

& hg dynames....

http://img.blogs.yahoo.co.jp/ybi/1/5..._11?1272024430

GN0010 Nosferatu 2010-04-23 08:01

Pictures ain't workin bro.


All times are GMT -5. The time now is 00:27.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.