I assume that's the fully completed, unpainted result?

was kinda looking forward to this kit, never built a HG before and thought i could make this my first one but after looking at the pics, a lot of painting seems to be needed to make this kit even remotely presentable...

the V-fin isn't even yellow, head seems way too plain (only the chin part is coloured), clear effect parts (like previously mentioned) are way too light, minimal detail/colour on weapons... etc

tbh i dont think its worth spending extra money to paint a HG kit, but once its painted i dont doubt this would be a awesome kit

fully completed but without the stickers... it should come with the yellow stickers for the fin and the eye stickers at the very least.

Frankly I would put time and care into any kit I own. It's not simply the possession that matters, it's the construction, the art and the craft...

Have both.

IG Exia is a special edition with chrome weapon, alternative exia repair parts and LED part.

Inf Justice is a normal MG kit.

Have a quick look at these; MG IG Exia and MG Inf Justice.

i guess it is a bit of a draw back to have the non colored clear parts, its not like its a hard thing to do to add colored clear parts to kits now. Over all i don't think it really needs all that much work done to it just a little paint here and there and panel lining, and i dont like the design of the 00 or 90% of the mobile suits from 00 season 2.

Except the stickers where they're suppose to be,yeah.
Well,it is coloured,just very very light clear green.Though I'm not saying that's a good thing.Hopefully it will change but perhaps not.

Ironically,the GN Sword III's tone of green is alot like the one seen in the Official Poses,so yeah they HAVE done it before,on the previous HG 00 release infact.

This color tone is more towards HG Cherudim GNHW/R's Rifle bits crystal sensors.They come in lightly clear blued,usually they never bother at all.

Thats because the stickers arent there......:(

Everything else is what it is except there's 0 stickers on it.Stickers are suppose to be there in the eyes,the fins and black on the Condensers.

Since you say you've never built a HG before,you may be a bit unaware that HG kits [at least the last few years] come with stickers for the face.I guess Dalong would be the more accurate site to check for unpainted out of the box HGs,though this would probably be not available there but the regular HG 00s are.

00 unpainted at all is pretty good for me,though I'm a complete color freak now,with the exception of the crystal sensor which bothers me alot but nothing a light blue marker cant fix.

Cant do much for the details I guess since its just a HG kits but I guess the HG kits in the last few years have improved alot over the HG kits before than by alot,though personally they've always been good enough for me at least,detail-wise.

Having said that,while the normal 00 is pretty sweet unpainted,this one looks less so because the amount you need to put into the Condenser Blades as well as the sensors.Not that much work but more than the regular I guess.Unless of course you can put up with the light clear green.

Paint makes all the difference...

I guess it does,but I'm hoping I didnt have to do too much of this time around,since its a busy time currently.

Clearly up some confusion in regards to the clear parts :-

http://img268.imageshack.us/img268/3...4313953284.jpg

Boxed wordings indicated that the final product will be in a deeper shade of green.

But IMO that's not a good thing as the concept art of 7S has the blades in a shallow green. So it anyone had any ideas about matching the model to the concept art, it will be a hassel to tune the blades back to that lighter shade.

Well, the 007S may have had a shallow green, but this image of the model is almost colorless, while the concept art actually shows color. Given that we don't yet know how much deeper they'll make the green in, we'll just wait and see.

Thanks for that little bit of info.Personally for me,I'm happy that the model is coming with a deeper shade of green,since it means less work on colouring the blades.

However,I can understand why some more experienced modelers who may want to have a lighter shade be disappointed,since a completely clear or lighter clear green would be easier to customize the tone yourself.

whats the site that posts various gunpla including gundam? it sometimes posts reviews, its not ngeekhiong but they separate the gundam to the various eras. i cant remember which site it was. last time i checked they left a spot open for the nebula blitz but the link was empty as they didnt get the time to check it out yet. mine's been ordered jan 12th but i do want to know before hand what peices wil come with it.

Regardless, I'll still dose the clear parts over with Clear Green.

Guess what people?

http://i96.photobucket.com/albums/l1...g?t=1264405812

:p If only...

LOL this is a joke, yea?

Yeah, it's fanart, but it's not like a MG Ahead would be bad.

I agree,that art is pretty nice and a MG Ahead wouldn't be too bad either.And I guess you can play around with the removable armor as well,maybe make it look more Gundamlike,like the chest orb.,and maybe even reveal the head this time around.[Mechanical profile wise,the Ahead is suppose to greatly resemble a 3rd Generation Gundam underneath the armor according to the HG manual,even possesing a chest orb.The heavy armor was made in order to make it look not like a Gundam because the Gundam-like symbolism may stir up public controversy,due to the public's hatred of them]

Infact,looking at the rear art,I finally can see how a 3rd GenerationGundam looking mech is indeed inside that blocky armor,I guess it looks more obvious from the rear and then comparing with say Exia's rear.I guess removing the plating in between the arms and the torso,some of the arms as well as the main torso armor and I guess you can indeed get a AD Timeline 3rd Generation Gundam from it.

And I guess adding the equipment seen from the last few episodes would have been nice too,the physical bazooka,the Tail Booster,etc.

Don't forget the missile container.;)

We were discussing this.........just a few centimeters above your current post if you took a ruler and measured it in your computer screen's length.......>_>

Thanks for the goodwill effort though.

But yeah,I want a MG 00 Raiser too.......PG is too big and expensive.However,better late and good rather than early and bad I guess.At least I hope it becomes that way if its late not that I mind an early AND good.[Probably wont be like Gundam X though]

Sorry, i failed to read the posts above which is all down to me getting over hyper over the MG ahead that is a fake haha

I love Bandai
April Release
http://farm3.static.flickr.com/2723/...8fdfb535_o.jpg

Okamidum... that's a fake.

he made the same mistake as i did haha

@Okamidum

sorry to say but this has been covered a page back

My dreams are shot.....but thanks guys haha.

You guys like the Ahead? I t kinda reminds me of a monkey :P

For some reason that fake MG Ahead art makes the legs and hips look better. But for me, the Ahead standing still looks like it has ape arms and birthing hips. Its just awkward looking.

Yeah, I believe some of us do...

I knew that MG announcement was a fake the moment I saw it, but that doesn't mean I wouldn't like to see it eventually, though, they should at least do an MG 00 before they do another mass-produced suit MG.

Agreed - I don't like the Ahead, personally...

And I guess they did GNX not only because of its popularity but so people would have ano appropriate G00 MG to pose with Exia? hahaha

Bandai need to stop wasting money on making crap MG and make something good like making GN Archer 1:100 :frustrated: IMO, GN Archer 1:100 will sell 10 times faster than MG grunt :P or even 1:100 Gaia Gundam even though they are years behind.

MG 00 Raiser might be coming late this year

Even though it's fake, that is some pretty damn good artwork.

ive finally finished my 100 gold frame amastu. still waiting for the paint on the /gunsheild to dry but aside from that i just need to put it on the actual sheild.

Say now, that's pretty damn sweet.

You know what Bandai sometimes it's a good idea to be a little greedy

for example start milking the MG GN-X variant



http://i46.tinypic.com/av0z01.jpg


http://i49.tinypic.com/309pwev.jpg


http://i48.tinypic.com/308whnt.jpg


http://i46.tinypic.com/2eee7oy.jpg


and also please don't forget the Superbia and GN-X IV :D

..... Release dates?

LOL I ALMOST pre-ordered the original GNX.

Eeerh the images posted are custom mods by Hobby Japan of the MG GN-X. Even if MG GN-XIII's or Advanced GN-X's are likely in the future, it's not definitive, hence no release dates as of yet.

That's one hell of a nice custom.

If they released a GN-XIII as a MG, even I'd have to consider... Love the red-violet color and the lances.