If these MG 2.0/RMs got released, what would you change?
Gundam Seed ZGMF-X10A Freedom Gundam RM Ver. Gundam Seed Destiny ZGMF-X19A ∞ Justice Gundam RM Ver. ZGMF-X20A Strike Freedom Gundam RM Ver. ZGMF-X42S Destiny Gundam RM Ver. ZGMF-X56S/α Force Impulse Gundam RM Ver. ZGMF-X56S/β Sword Impulse Gundam RM Ver. Gundam Wing XXXG-00W0 Wing Gundam Zero RM (EW Ver.) XXXG-01W Wing Gundam RM (EW Ver.) |
Finished the waist and torso of the Strike Freedom yesterday.
And guess what? When I wanted to connect the upper torso to the lower torso the joint completely broke! And by broke I mean it got freaking annihilated... The hole that held one of the polycaps shatterd and part of the connector joint on the opposite side of the joint just snapped off. I guess knock off model plus poorly designed joint by Bandai just doesn't mix well. So I just dumped in a shitload of super glue. It's not like I'm gonna miss that joint, I didn't plan to use it at all. I prefer a solid connection in the waist area over a floppy joint. Also, the legs pop off easily. Dumped in some clear nail polish, that should fix the issue. |
Quote:
|
Quote:
Quote:
Quote:
Gaaaahh you guys are so lucky! I live in the US, and I have never seen an online exclusive before at my LHS The only online asian base exclusive store I know is Gentei, but they only stock the more recent exclusives I dont know any other trusty sites which stock old exlusives :( |
Quote:
Just a reminder that Black Friday savings are included on preorders at HLJ. The MG Sazabi Ver. Ka is now 6600 Yen. I am going to take advantage of this.. hope it isn't to late for the pre-order. |
I think I know what model I'll buy next
Pscyho, fucking, Gundam. Same size as PG, complexity less than that of MG. GENIUS! Quote:
Assuming their stock still available, you might find such kit. |
Quote:
Quote:
That the joint breaks on a knock off that otherwise has no quality problems at all? Yes. |
Quote:
Now, if you can properly communicate with Gentei (as in by phones, emails, etc), you can tell them that you really want MG Destiny Heine thus asking them to put your name (and contact numbers) on their list of customers who will receive the kit once it got restocked. A good hobby store usually willing to accept that kind of request as it will only bring them more profit & loyal buyers. Btw, since you live in the US, are stores like GG Infinite and the likes never had any restock of old Limited kit (for example, MG Zeta Karaba)? |
founded on tumblr... i'm almost died.. XD XD XD XD XD
http://distilleryimage3.ak.instagram...4d2f8dd0_8.jpg |
I'm not usually interested in online exclusive unless it's something nice like the Zeta Unit 3. But the new Byarlant Custom Unit 02 and the Bande Dessini Version made me pre-order straight from Samuel Decal. The price is also comparative to the P Bandai HK store, so that's not too bad. There's something about the colour scheme and backpack guns which appeals to me more than the normal Byarlant.
Silver Bullet included GM Head was a nice touch but it's possibility of Ribbon Striker that is surprising on my radar. I'd love to get one for Nobel Gundam. And HG Psyco Gundam is a recommended buy! It's big and fun to put together for a HG kit. The only downside is the rubber V-fin. |
Quote:
Well, with 5000 yen that still more than generous thing to offer. |
Quote:
The solid finished kit can easily hold other HGUC kits. Infact, once completed, it looked more cute than intimidating. |
> Cute
> Not intimidating Dynamic tag cannot be rendered. (PrintableThread) Man I want it so bad... |
Welp, I just panicked a little.
Seems like instead of giving you a D1 and a D2 runner for the PG Strike Freedom Daban just gives you 2 D1 runners and they just cut off the pieces you don't need. When I was building the arms I thought 4 pieces were missing because of that :P I wanted to finish the head, arms and shoulders today. Now I just finished the head and half an arm XP |
As crazy as it sounds, I've already started purchasing and paying off for GunPla that is coming in 2014... Already I can tell it's going to be expensive, but with my wish list of MGs being fulfilled bit by bit, I can already tell that my GunPla involvement will be over soon.
|
Ok so I now have some new questions about painting. I literally no zilch about it. How would I go about safely layering paints on top of each other without them eating at each other or the plastic?
I decided to just purchase an airbrush. I will mainly be using Tamiya ACRYLICS for painting. what kind of thinner should I use? Just the tamiya brand? And is Acrylics ideal for airbrushing once it is thinned? What type of primer should I use that I can put acrylics on top of? And finally what kind of gloss top coats should I use that I can put on top of the acrylics and UNDER enamale (when I panel wash)? Then finally, what kind of matte top coat would I be able to use? I bought these: http://www.amazon.com/Testor-Corp-Du...stors+dullcote but now I am hearing I shouldn't use Lacquer on top of acrylics and enamel.... |
Quote:
I mostly use Lacquer product BTW Additional info |
Quote:
Quote:
|
Oh, and to offset the lack of proper supplier of spray can for modelers...
I use tons of Acrylic-Lacquer topcoat normally used for motorbike parts and accessories. They work wonders when I don't paint the model much, or when I use lacquer paints. |
Ok so since tamiya acrylics are the most abundant in my area, I should just stick to acrylics ONLY right?
So: 1. Acrylic OR Lacquer Primer(BTW, what type of primer is the Tamiya brand? And I heard lacquer eats up plastic?) 2. Tamiya acrylic airbrush coats 3. Acrylic gloss clear coat 4. Enamel Wash. (all the tutorials say to use enamel...) 5. Acrylic matte coat 6. Done? |
All times are GMT -5. The time now is 07:31. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.