AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

loon1688 2013-05-24 10:42

Quote:

Originally Posted by suiton629 (Post 4694803)
So no Wings of Light effect pieces?

no..... do you think it worth to get it? almost same price wif 1 RG kit..... MG wing more nice..... compare with RG 1

Obelisk ze Tormentor 2013-05-24 10:48

Quote:

Originally Posted by loon1688 (Post 4695142)
no..... do you think it worth to get it? almost same price wif 1 RG kit..... MG wing more nice..... compare with RG 1

Honestly, I think the RG's WoL is uglier than the MG one. So no, I don't think it's worth it with that price. Still, if you have too much money, you can always waste them on expensive stuffs ;).

suiton629 2013-05-24 10:57

Quote:

Originally Posted by Obelisk ze Tormentor (Post 4695154)
Honestly, I think the RG's WoL is uglier than the MG one. So no, I don't think it's worth it with that price. Still, if you have too much money, you can always waste them on expensive stuffs ;).

I bet Bandai is already planning more RM Ver. for Seed/Seed Destiny kits, and I'm guessing the MG Destiny RM Ver. is one of them. I'm sure they'll release Wings of Light as an online exclusive when it'll probably just be taking it from the same one from the Extreme Blast Mode version.

Skye629 2013-05-24 13:39

I wonder, is it possible to easily mod the HGs WoL to fit the RG's?

And NO Suiton, Destiny does NOT need a RM kit, it's hands down one of the best MG out there ATM and about everything is spot on besides the lack of WoL, and if you are going to shell out all that cash for a exclusive online WoL then you might as well go for the FBM, which comes with additional effect parts and silver plated inner frame parts (and a kickass box)

suiton629 2013-05-24 13:51

Quote:

Originally Posted by Skye629 (Post 4695350)
I wonder, is it possible to easily mod the HGs WoL to fit the RG's?

And NO Suiton, Destiny does NOT need a RM kit, it's hands down one of the best MG out there ATM and about everything is spot on besides the lack of WoL, and if you are going to shell out all that cash for a exclusive online WoL then you might as well go for the FBM, which comes with additional effect parts and silver plated inner frame parts (and a kickass box)

You think that it'll be 100% impossible or not likely for Bandai to do a RM Ver. of more kits? They did confirm that the RM Ver. will be a series of kits.

Providenceangle 2013-05-24 15:45

Personally, I'm not a fan of WoL but, you can easily make some. Just buy a clear piece of plastic. You can get them, just like styrene sheets. Trace a pattern, spray with some clear paint, Clear coat. I've actually considered doing this for my HG hi nu. Again, not really a fan of it so... lol

StrikeFreedomV2 2013-05-24 16:03

If anyone's interested: RD Full Armor Unicorn is now in stock at HLJ. Got my payment request just now

Skye629 2013-05-24 19:34

Quote:

Originally Posted by suiton629 (Post 4695361)
You think that it'll be 100% impossible or not likely for Bandai to do a RM Ver. of more kits? They did confirm that the RM Ver. will be a series of kits.

No such thing as impossible, I would say highly unlikely

By your logic the next in line for a RM would be the Freedom or Strike Rouge, since theyre older kits, those have more chances for a RM than Destiny do

maknaedik 2013-05-24 20:59

I've been a fan of RM series ever since its pilot episode. It holds the first spot in TV ratings for its time slot. http://en.wikipedia.org/wiki/Running_Man_(TV_series)

It's just sad that the MG Destiny Heine Custom doesn't come with WoL effect part :(

firefox 2013-05-25 01:21

Quote:

Originally Posted by StrikeFreedomV2 (Post 4695466)
If anyone's interested: RD Full Armor Unicorn is now in stock at HLJ. Got my payment request just now

Way ahead of you, it's paid and ready to ship ;)

I buy RD for suits i find interesting but not interesting enough to warrent building then in HG/RG/MG/PG.

With extreme limited time RD is a (rather expensive) alternative to fill my shelves ;)

I allready have the older 1.0 unicorn gundam, which wasn't bad, just bought this guy for the option parts

duotiga 2013-05-25 04:39

Quote:

Originally Posted by Providenceangle (Post 4695451)
Personally, I'm not a fan of WoL but, you can easily make some. Just buy a clear piece of plastic. You can get them, just like styrene sheets. Trace a pattern, spray with some clear paint, Clear coat. I've actually considered doing this for my HG hi nu. Again, not really a fan of it so... lol

From my knowledge 3rd party is going to make the WoL for RG Destiny . Saw the teaser photo in Facebook

Providenceangle 2013-05-25 08:35

Quote:

Originally Posted by duotiga (Post 4696146)
From my knowledge 3rd party is going to make the WoL for RG Destiny . Saw the teaser photo in Facebook

I won't buy it either way. I only suggested something. If I was interested in WoL, I would make my own. I'd want it to look exactly the way I want it to.

suiton629 2013-05-25 09:24



So apparently the upcoming Metal Build Exia Repair I has conversion parts to make it the Repair II variant.

>_>

Damn it. We need that freakin' MG Exia R2 with R3 conversion parts. Come on Bandai!!!

StratoSpear 2013-05-25 09:50

I must be one of a kind idiot to actually seek an RX-78-2 MG at this point... It's hard to find one anywhere! Or I'm just not looking at the right places.

Worse comes to worst, I'll just wait for the 3.0

Another question, is there an RD exclusive of a green psycoframe Unicorn Desmod?

suiton629 2013-05-25 10:27

Quote:

Originally Posted by StratoSpear (Post 4696346)
I must be one of a kind idiot to actually seek an RX-78-2 MG at this point... It's hard to find one anywhere! Or I'm just not looking at the right places.

Worse comes to worst, I'll just wait for the 3.0

Another question, is there an RD exclusive of a green psycoframe Unicorn Desmod?

>_>

http://lmgtfy.com/?q=RX-78-2+MG

Click that link and you'll be able to find listings for MG RX-78-2.

StratoSpear 2013-05-25 10:32

That's a rant of me not being able to physically find one in shops, dude. I don't really have the privilege of internet-purchasing, ya' know?

suiton629 2013-05-25 10:33

Quote:

Originally Posted by StratoSpear (Post 4696385)
That's a rant of me not being able to physically find one in shops, dude. I don't really have the privilege of internet-purchasing, ya' know?

Well, if you're not gonna buy online, then you're better off just waiting for the MG RX-78-2 Ver. 3.0 to be made available at your local shops.

firefox 2013-05-27 01:16

Quote:

Originally Posted by suiton629 (Post 4696325)


So apparently the upcoming Metal Build Exia Repair I has conversion parts to make it the Repair II variant.

>_>

Damn it. We need that freakin' MG Exia R2 with R3 conversion parts. Come on Bandai!!!

For the far less gifted among us...
You have both as the normal, allready released!!!!!, metal build Exia comes with conversion parts for making Exia Repair 3...

So buy 2 of each and you can have all 4 forms displayed! and that for only 600$, bargain if you ask me ;)

firefox 2013-05-27 01:26

Quote:

Originally Posted by StratoSpear (Post 4696346)
I must be one of a kind idiot to actually seek an RX-78-2 MG at this point... It's hard to find one anywhere! Or I'm just not looking at the right places.

Worse comes to worst, I'll just wait for the 3.0

Another question, is there an RD exclusive of a green psycoframe Unicorn Desmod?

Depends on what version you want. MG's are regulary reprinted, so if you want a particular allready released version that is out of stock you may need to wait a few months.

I usually pre-order the reprint then build something else in between until it's released. Or you can go for 3.0, unfortunately it's allready sold out in alot of shops, but as it is a new model it's always reprinted the month after release.

There are alot of exclusive RD's, in fact to much of them. There is an exclusive glowing version RD unicorn gundam, it shines red, but if i recall correctly there is a green glowing one too, released in december. Expensive thing.

found it at a online shop:
http://www.toyarena.com/images/4543112814197.JPG

duotiga 2013-05-27 05:54

Be grateful that bandai release the all forms of Exia in metal build but can use the MG to complement.


All times are GMT -5. The time now is 10:54.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.