Yes, that's good enough. Except for the wash, I'm still not sure...
Also, depends on what plastic. But lacquer primer is not recommended for Gunpla, IIRC. If you want to be sure, just test them on the runners/sprues. --- Anyway, do anyone here have an idea how Sei scratchbuilt 2 extra head vulcan into his Gunpla? Seems to be a tough job. |
Quote:
|
Just get Tamiya acrylics. Stick with 1 brand and 1 type of paint.
|
Panel line wash shouldn't be the same type of paint you used on the kit, for example painted the kit with acrylic then enamel on the panel line wash. If you used one and the same type of paint both in painting and panel line wash, both of them will stick together or worse mixed up so if you tried to remove the excess panel lines then so does the paint. It's a simple logic like the oil and water won't be mixed together.
|
Paint with Tamiya acrylics.
Or what you can do is 'milk' Gundam Markers onto a paint tray, and then use it to hand brush gate marks. Then panel line with the panel lining Gundam Marker, and then spray a flat top coat over it. It'll give it the painted look with the details you want. |
finally is here!!!
http://i120.photobucket.com/albums/o...CFDF8B4D6C.jpg now i shall wait for the RG Destiny Heine ver.... |
Quote:
I was considering the RG Destiny Heine but I declined. =D I'm waiting for these right now: SD God SD Devil SD Shining MG Exia Repair 2 MG X RG Strike Freedom + Wings RG Destiny + Wings ...and some Action Base 1s and LED sets =D Lots of GunPla paid for. Now just a matter of time. |
Problem with the Gundam markers for panel lining is still a bit thick, more especially if you want to apply it on a very thin or very deep details which even the Gundam Markers can't even reach. So instead I use Copic Marker 0.03 on very thin panel lines which is even more thinner than Gundam Markers and on very deep details which is even the copic markers can even reach, I'll just use enamel wash instead.
|
Quote:
It's still pretty thin and you can do what I and others do. Use it, and then wipe off excess with a q-tip/cotton swab. |
I already used Gundam marker before and it's still a bit thick compare to copic marker 0.03 as seen on the picture you've posted, never ever used Gundam markers since ages.
|
Quote:
|
Call me lazy, but that's all I do.
|
Don't panel wash with enamel over acrylic. The lighter fluid will eat the paint! You can do panel washes with water and acrylic. It works the same as the enamel washes, just wait 3-5 days for the base paint to dry. You know already about clear coating before doing the wash, this step is the same, but when using acrylic it's critical that you leave the base coats dry, so they don't lift with the watered down acrylic wash. Use the same cotton swab/qtip method. You can get the same results.
Enamel panel washing is used for people who use lacquer paints as a base. Lacquer paints are the best but, they can eat plastics(best to use airbrush in thin coats, until you have a thin dry base you can paint over, so they don't eat the plastic). They are very toxic as well. A respirator is a must.(should use a mask for any painting) |
Quote:
|
BOOM headshot....my wallet took a hit....
Ordered a HG Age-1 with razor parts and pre-ordered the MG X..... I can honestly say I actually hate deals, they always make me part with my hard earned cash when I'm not supposed too!!!:frustrated::upset: |
Quote:
Here's what I have on queue and recently received.. Recent received... SD Exia SD 00 Raiser (x2) --> to make one condenser type SD 00 Qan[t] SD 00 7 Sword G Action Base 2 Sparkling Green (x7) Waiting for... SD God SD Shining SD Devil SD Wing Zero Custom SD Wing EW RG Strike Freedom + Wings RG Destiny + Wings MG Exia R2 MG X MG Wing Gundam EW MG Wing Zero Custom green LED set Action Base 1 Celestial Being version (white) If your think that's a "BOOM headshot", then mine must be a BOOM NUCLEAR GIGATON EXPOSSIONNNZZ TIMEZZZZZZZZ right? :eyespin: :) EDIT Can you take the SD Wing EW and SD Wing Zero Custom and kit bash easily to give it a SD Wing Zero Custom with more modern, proportioned SD scale? |
Quote:
Even though Im in the US I have not checked GGInfinite much, so Im not too sure whether or not they periodically restock the exclusive kits when Bandai rereleases them or when they reprint/do another run of them Quote:
|
Quote:
|
My "BOOM headshot" for me so far is the whole set of Gundam Wing G-Unit series:
Gundam Geminass 2x(display both as normal and space type Unit), Gundam Hydra, Gundam L.O. Booster, Gundam Aesculapius and Gundam Griepe. |
Can you take the SD Wing EW and SD Wing Zero Custom and kit bash easily to give it a SD Wing Zero Custom with more modern, proportioned SD scale?
|
All times are GMT -5. The time now is 19:06. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.