AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Sworra 2010-03-08 13:46

I just got in my MG Red Frame today. Can't wait to starting building it but im a few MG's off to get to :( I need more hands and time to finish the others. lol

http://img3.imageshack.us/img3/5199/img0010jk.jpg


Nice Amatsu X207 good job on it.

Sir Dearka 2010-03-08 14:34

Quote:

Originally Posted by X207 (Post 2948940)
http://img13.imageshack.us/img13/871...riadisplay.jpg
my lunamaria collection with the 1:100 zaku.

Nice, Zaku Gunner rocks :P

http://img.photobucket.com/albums/v2...r/DSC00521.jpg

I've got an Amatu, too. It's like the highlight of my whole collection. Definitely one of the best Gundam designs out there.

Akuma_Blade 2010-03-08 14:59

Quote:

Originally Posted by Sir Dearka (Post 2947362)
The coolest villain squad ever ;)

I absolute agree!

vektar 2010-03-08 17:05

Quote:

Originally Posted by Sworra (Post 2948982)
I just got in my MG Red Frame today. Can't wait to starting building it but im a few MG's off to get to :( I need more hands and time to finish the others. lol

http://img3.imageshack.us/img3/5199/img0010jk.jpg


Nice Amatsu X207 good job on it.

nice you got two of them, doing anything to either of them? like one will be a normal ver and the 2nd some kind of custom?

X207 2010-03-08 17:23

Quote:

Originally Posted by Sworra (Post 2948982)
I just got in my MG Red Frame today. Can't wait to starting building it but im a few MG's off to get to :( I need more hands and time to finish the others. lol

http://img3.imageshack.us/img3/5199/img0010jk.jpg


Nice Amatsu X207 good job on it.

thanks, it was a bitch to finally figure out what i need for the project ie brass spray paint. it turned out ok aside from a hiccup ie cut tab that holds the bottom KE dart by accident :mad: now super glued to the dart binder.

Quote:

Originally Posted by Sir Dearka (Post 2949046)
Nice, Zaku Gunner rocks :P

http://img.photobucket.com/albums/v2...r/DSC00521.jpg

I've got an Amatu, too. It's like the highlight of my whole collection. Definitely one of the best Gundam designs out there.

nice gunner zaku collection, i have a sudden urge to get a mini lunamaria zaku. did your BB zaku need much painting? my zaku is 99% accurate in detail as far as colours go but i left out some minor panel lines. did you ever find a way to pose your zaku like mine while leaving guster rifle level without any leaning to a side? i have only one complaint on my zaku: rear waist panels dont move like the front peices.

id say mine stands out but its second to the gaddess and custom garrazzo (currently priming parts for paint). though the highlight of my collection probably will be the gnz 007, 004 and the repainted amatsu blitz gundam. the amatsu is next on the list to build. soon enough i will be able to show a blitz gundam collection though photoshop will be needed to show all the ones i have lol.

Quote:

Originally Posted by vektar (Post 2949256)
nice you got two of them, doing anything to either of them? like one will be a normal ver and the 2nd some kind of custom?

i dont have any more plans for my amatsu, the only thing i did was leave off the gold on the shoulder and thats all. if anything i might play around with equipement from black nebula blitz whenever i get to building it.

Sworra 2010-03-08 19:17

Quote:

Originally Posted by vektar (Post 2949256)
nice you got two of them, doing anything to either of them? like one will be a normal ver and the 2nd some kind of custom?

Nah i am giving one to a friend, Mine i am customizing though. I'm going to place the MG Aile Strike pack, alter it a bit and put it on the Red Frame. I don't really like the tacticale arms II pack.

X207 2010-03-08 19:43

@sir dearka: i was looking at some SD reviews of the lunamaria zaku and i noticed a defect in the sd gunner
http://www.youtube.com/watch?v=-NNOzGcuh2w&NR=1
at 0:13 theres a big hole under the hand, did yours also have this?

Dynamite 2010-03-08 23:40

Quote:

Originally Posted by X207 (Post 2949393)
@sir dearka: i was looking at some SD reviews of the lunamaria zaku and i noticed a defect in the sd gunner
http://www.youtube.com/watch?v=-NNOzGcuh2w&NR=1
at 0:13 theres a big hole under the hand, did yours also have this?

That isn't a defect.
The majority of "grabbing" hands that are a separate piece from the arm are hollow with nothing underneath.

Un1ver5e 2010-03-09 02:46

I assume that this one is similar to the one packaged with the cage? (Design wise. Without the cage of course.)

MG Unicorn Gundam - Box art shown. Release date: 11th, 5,250 Yen (inclusive of tax).
http://farm5.static.flickr.com/4061/...91846619_m.jpg

duotiga 2010-03-09 07:21

larger image of it

http://gunpla.jp/jgoc/kensakug/upfil...ackage_120.jpg

blue sabre indeed =x

Ypocaramel 2010-03-09 07:53

Eh, what's this? Gundam Unicorn Ver Not Ka?

MakubeX2 2010-03-09 08:06

Quote:

Originally Posted by Ypocaramel (Post 2950029)
Eh, what's this? Gundam Unicorn Ver Not Ka?

Does it matter when the Unicorn is designed by Katoki himself ?

If you ask me, the first Unicorn MG kit just added that "ver.Ka" as a sales pitch for a rushed problematic release to cash in with the release of the novels back in '07.

SonicSP 2010-03-09 13:37

Question to those who own HG 00 Raiser.

Does your stand have problem "gripping" the slot on where it connects to 00?Mine always feels lose for some reason.....and its a big problem as it limits the poses it can do.Its at an inclined angle of course because I'm making the 00 tilt forward a bit.I've suffered this problem........well since I can remember.Does everybody have this?

I always find myself needing to using a bit of cement to hold it in place,then simply forcepulling it out when I want to change its orientation. [On an unrelated note,I also do the same for the 0 Raiser wings].

By the way,I'm using one of those large green 1/100 stands.The one that can be used with both 1/100s and 1/144s.I suffer the same problem with the HG stands for this too.

vektar 2010-03-09 14:31

Quote:

Originally Posted by SonicSP (Post 2950458)
Spoiler for save space:
.

if your talking about a normal action base i have the same issue too with my heaver kits like the MG gelgoog and qubeley they just seem to weigh a bit more then what the action base can handle at times so the use of glue to tighten the joints on the stand are needed.

Sir Dearka 2010-03-09 15:12

Quote:

Originally Posted by X207 (Post 2949273)
nice gunner zaku collection, i have a sudden urge to get a mini lunamaria zaku. did your BB zaku need much painting? my zaku is 99% accurate in detail as far as colours go but i left out some minor panel lines. did you ever find a way to pose your zaku like mine while leaving guster rifle level without any leaning to a side? i have only one complaint on my zaku: rear waist panels dont move like the front peices.

To be honest I never tried. I put it in traditional posistion and kinda like it this way for now :D As far as my BB Zaku, as well as any other Gunner kit, is considered, I just panel-line them. The effect is satusfying enough to me.

Quote:

Originally Posted by X207 (Post 2949393)
@sir dearka: i was looking at some SD reviews of the lunamaria zaku and i noticed a defect in the sd gunner
http://www.youtube.com/watch?v=-NNOzGcuh2w&NR=1
at 0:13 theres a big hole under the hand, did yours also have this?

Yup, same thing about my BB Zaku.

But there's a funny story. There is no BB green Gunner Zaku. I had to buy a Zaku Warrior and Lunamaria's Gunner Zaku to combine them :] The Blaze pack I attached to the red Zaku and gave it to my friend who does not know a thing about Gundam series :]

SonicSP 2010-03-09 15:21

Quote:

Originally Posted by vektar (Post 2950568)
if your talking about a normal action base i have the same issue too with my heaver kits like the MG gelgoog and qubeley they just seem to weigh a bit more then what the action base can handle at times so the use of glue to tighten the joints on the stand are needed.

Which makes me wonder,they do give you and extra screw with those bases,and we have like 3 or 4 holders or something as I recall in regard to how we want to use to connect the base to the kit.

I wonder......is the screw given so we can screw the it in using one of the 4 holders given to us?Because I recall one of the kit holder is some sort of hole,but neve rpaid so much attention to it.I've only use the normal pointy stick that slots in the hole.

X207 2010-03-09 18:44

Quote:

Originally Posted by Dynamite (Post 2949627)
That isn't a defect.
The majority of "grabbing" hands that are a separate piece from the arm are hollow with nothing underneath.

thanks, what could be done about them to cover it up? i wouldn't mind getting a SD gunner zaku but im not sure if its easy to cover up.

HiddenMessage 2010-03-09 19:08

My current Collection :D
http://img534.imageshack.us/img534/2794/dsc00024pm.jpg

GN0010 Nosferatu 2010-03-09 19:43

The color of Unicorn's beam sabers is getting a bit confusing.

First they're clear, then pink, now blue. Which is it?!

Chiu_fan 2010-03-09 20:05

Quote:

Originally Posted by SonicSP (Post 2950458)
Question to those who own HG 00 Raiser.

Does your stand have problem "gripping" the slot on where it connects to 00?Mine always feels lose for some reason.....and its a big problem as it limits the poses it can do.Its at an inclined angle of course because I'm making the 00 tilt forward a bit.I've suffered this problem........well since I can remember.Does everybody have this?

I always find myself needing to using a bit of cement to hold it in place,then simply forcepulling it out when I want to change its orientation. [On an unrelated note,I also do the same for the 0 Raiser wings].

By the way,I'm using one of those large green 1/100 stands.The one that can be used with both 1/100s and 1/144s.I suffer the same problem with the HG stands for this too.

Never happened to my stand. Try using Figma stands, I used one on my 00.


All times are GMT -5. The time now is 00:38.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.