AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Critias 2008-01-19 23:15

Quote:

Originally Posted by U<3Anime (Post 1351731)
X is like the only AU series that hasn't received a MG treatment yet. :<

I prefer a MG X Divider >_>

Oh that would definitely come after The MG X. We all know that Bandai likes to recycle :p

LightningZERO 2008-01-20 01:33

I want a MG X normal version with divider shield. I hope Bandai will make a 2 in 1 set :p

I can dream right?

Seanohue 2008-01-20 19:01

Quote:

Originally Posted by dodgethis_sg (Post 1350389)
Actually, you can use windows cleaner as well. It works even better than water.

And that's interesting for your situation about Tamiya acrylic thinner not working for you. I've never encountered the problem you had. I've used it with Citadel and Tamiya acrylic paints as well as Vallejo and never had problems. And yes, I have used window cleaner and water with them as well without any problems.

Maybe you could post a picture of the thinner you bought and it's smell.

Here: http://www3.towerhobbies.com/cgi-bin...&I=LXGR26&P=ML

This is what the shield looks like now (I'm painting the white part of it now, so the blue has tape on most of it):

http://img261.imageshack.us/img261/7...ture027pd2.jpg

Definitely smoother looking, I think.

Btw, is white supposed to take a lot of coats to get it covered? That blue required about 4, but I think I'm up to 11 with this white, and its still not ready.

Shiro-Oh! 2008-01-20 21:13

Quote:

Originally Posted by Seanohue (Post 1352986)
Here:
Btw, is white supposed to take a lot of coats to get it covered? That blue required about 4, but I think I'm up to 11 with this white, and its still not ready.

To minimize putting on multiple layers of coatings, you should try priming the parts, or at least the section of the part, that you're painting. I don't paint my models entirely, just partially. And for the primer, I use Tamiya Surface Primer. It works great.

Seanohue 2008-01-21 19:19

Quote:

Originally Posted by The Unknown Ace (Post 1353141)
To minimize putting on multiple layers of coatings, you should try priming the parts, or at least the section of the part, that you're painting. I don't paint my models entirely, just partially. And for the primer, I use Tamiya Surface Primer. It works great.

Yea, that would have been a good idea; I'll throw a bottle or two in on my next order.

I ended up scrapping the Gundam I posted above (Hardy Gun #1); the coverage just sucked and I made the mistake of doing panel lines after painting. So for the next kit (which is Tallgeese III), if I am priming the parts (and I have to this by hand, as I'm in a dorm and can't be spraying anything), should I do panel lines before or after priming?

Oh and what do you guys think - Unicorn or Hi-Nu? I'm completely torn between them.

Spitfire 2008-01-21 19:34

From Gunota:
MG Zaku Cannon in the works

Bandai Hobby Center's Space diary of the Captain blog explicitly confirms that a MG Zaku Cannon is planned. Photos therein are of a prototype display version from last year's Shizuoka Hobby Show.
http://blog.lalabit.com/hobbycenter/.../post_289.html

beamknight87 2008-01-21 23:03

MG Zaku Cannon...................... bleh


Where's my Gundam X and/or Nightingale Bandai?

Spitfire 2008-01-21 23:43

Quote:

Originally Posted by beamknight87 (Post 1354948)
MG Zaku Cannon...................... bleh


Where's my Gundam X and/or Nightingale Bandai?

I think I'm the only person who DOESN'T want an MG Nightengale. I honestly hate the design compared to the Sazabi.

LightningZERO 2008-01-22 00:51

Stop the Zaku madness!!!

sword.impulse 2008-01-22 02:09

Quote:

Originally Posted by LightningZERO (Post 1355113)
Stop the Zaku madness!!!


seriously, i do plan on getting the 2.0 though.

duotiga 2008-01-22 06:34

the Zaku hypeness now......at the same time...

Gundam Base Gunpla exhibition

The Gundam Base.Side 1 has 80 pics of a Gunpla exhibit they recently held.

frm Gunota

MakubeX2 2008-01-22 09:03

http://img166.imageshack.us/img166/5...6779508rz6.jpg

Fafnir 2008-01-22 11:18

Quote:

Originally Posted by MakubeX2 (Post 1355583)

The plane mode is so disturbing...

GameraBaenre 2008-01-22 16:32

Hooray for more zaku's!

beamknight87 2008-01-22 22:50

I just bought the MG Destiny special version, the translucent effect parts and the figures of Jesus Yamato and Moronic Shinn are plain meh, but the Wings of Light... whoa, they're quite big, much more than what I thought they would be.
Also, got the 1/100 Alteisen model from Kotobukiya, the display figure of Glorious Leader Nanbu looks quite good, I'm looking forward to see how does this thing looks with the LED on.

aikming 2008-01-22 23:15

Quote:

Originally Posted by LightningZERO (Post 1355113)
Stop the Zaku madness!!!

Seconded.... zaku again....haih

LoweGear 2008-01-22 23:55

New model announcements come with a new spoiler:

Quote:

Originally Posted by Gunota Headlines
MG Zaku Minelayer - March, 4,725 yen
MG MS-06F Zaku II Ver. 2.0 - March, 3,675 yen
HGUC Nu Gundam - March, 2,625 yen
HG Gundam Throne Zwei - March, 1,680 yen
(Gundam 00 Exia spoiler) GN Arms - transforming weapons platform w/ special specs HG Gundam Exia, March, 5,775 yen

But perhaps the most exciting news...

HGUC NU GUNDAM!!!!!!!!!!!!!!! :eek::eek::eek:

Cherudim Arche 2008-01-22 23:59

Quote:

Originally Posted by MakubeX2 (Post 1355583)

What next? Virtue casting off.:heh:

LoweGear 2008-01-23 00:17

The GN Arms:

http://img251.imageshack.us/img251/571/gnarmsnc8.jpg

I so knew it...

LightningZERO 2008-01-23 00:22

A melee Meteor? LOL. Looks cool. I guess it will be used to fight Ali's new MA? :D. Kinda expensive though

But HGUC Nu Gundam rules!!!
http://img182.imageshack.us/img182/4...2213498ad2.jpg


All times are GMT -5. The time now is 21:51.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.