AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

JC... 2010-08-15 06:39

Quote:

Originally Posted by bio9205 (Post 3192884)
Anyone have a suggestion for a conventional/easily available glue-ish thing that I can use for tightening ball joints? I'm not very experienced with super glue and cement, so I'm not that keen on using those.

Someone used blu-tack...

bio9205 2010-08-16 02:46

As for super glue - what kind do I use, and how do I use/apply it? The super strong version?

JC... 2010-08-16 03:28

Quote:

Originally Posted by bio9205 (Post 3194204)
As for super glue - what kind do I use, and how do I use/apply it? The super strong version?

I guess you could use any super glue really, as long as it doesn't melt/mold the plastic peices together. I'd apply a thin layer on the ball, let it dry and see if it's tight enough then, don't put it in the socket while it's not dry, to be safe.

LoweGear 2010-08-16 23:48

New official images of the HG Gundam Harute:

http://img834.imageshack.us/img834/3482/toygdm1244.jpg
http://img295.imageshack.us/img295/4...ygdm124402.jpg

GN0010 Nosferatu 2010-08-17 00:25

Flawless victory.

amurorei83 2010-08-17 00:52

That is one sexy beast!

Kagekyuubi 2010-08-17 02:03

How's the estimated ETA to the 1/100 releases? I must own Zabaniya and Harute in their full glory. Wallet be damned, I want them with full gimmicks!

LightningZERO 2010-08-17 03:28

Pure badass!

StratoSpear 2010-08-17 05:15

It'd be cool if they have the 6-eyes gimmick for the 1/144 Harute

bio9205 2010-08-17 06:00

Quote:

Originally Posted by StratoSpear (Post 3195941)
It'd be cool if they have the 6-eyes gimmick for the 1/144 Harute

Probably not, even if it does, it'll be part-swapping with a new head. 1/144's too small to do this...

Anyway, I LOVE the Harute. Can't wait to get my grubby paws on it... :D

duotiga 2010-08-17 06:36

im so gonna get harute :love: maybe 2? =x

SonicSP 2010-08-17 15:00

Quote:

Originally Posted by bio9205 (Post 3192884)
Anyone have a suggestion for a conventional/easily available glue-ish thing that I can use for tightening ball joints? I'm not very experienced with super glue and cement, so I'm not that keen on using those.

Personally, I'd recommenda againts using superglue. I've personally had bad experience with them as far as ball joints are concerned. They can stick, problem is that that once you forcibly move them around the cohesion breaks and they become even looser than before. Thats just my experience however. Maybe my superglue just sucks, I'm sure different ones would work differently in practice but its just the experience I have with mine.

My prefered solution is painting the surface of the joint and then wait for it to dry. It makes it a stronger joint in general. I've only used black however, I remember reading that advice once on this thread and it has work wonders for me personally. Painting the inside part of where the joint connects to helps too.

Just dont connect when its still wet, otherwise its impossible to remove. Wait till it dried completely. Just painting with a brush is enough.



Quote:

Originally Posted by LoweGear (Post 3195667)



NOW THIS IS THE REASON IVE CHOSEN YOU AS MY FAVOURITE TRAILBLAZER DESIGN ALL THIS TIME!!!!!!

kakakka 2010-08-17 19:28

I can't take my eyes away from that red crotch...

Anyway, how much sticker do you guys think this model have?

GN0010 Nosferatu 2010-08-17 20:19

Why did they wait this long to make an awesome entry into the Kyrios line?

Kyrios = awesome, Arios = meh (even with GNHW/M), Harute = fantastical.

Kitaeryu 2010-08-17 20:20

Quote:

Originally Posted by kakakka (Post 3197036)
I can't take my eyes away from that red crotch...

Anyway, how much sticker do you guys think this model have?

I'm guessing the cockpit, chest, eyes, arm circles, and maybe even the yellow pieces on the head (hopefully not)


On a side note, if i were to spray the inner frame of the MG Red Frame Astray with topcoat, if some of the topcoat were to go into the joints, would it cause the joints to seize up and not move anymore once its dried?

Haladflire65 2010-08-17 20:42

Quote:

Originally Posted by LoweGear (Post 3195667)

Wow. :love: Damn, I can't choose between Harute and Zabanya :( :( So does Harute definitely stand on its own then? Cause its butt still looks huge but there doesn't seem to be that base any more.

kakakka 2010-08-17 20:53

Quote:

Originally Posted by Haladflire65 (Post 3197137)
Wow. :love: Damn, I can't choose between Harute and Zabanya :( :( So does Harute definitely stand on its own then? Cause its butt still looks huge but there doesn't seem to be that base any more.

Though, it might be standing because of the support from the two large guns.

LoweGear 2010-08-17 21:28

Quote:

Originally Posted by Kitaeryu (Post 3197102)
I'm guessing the cockpit, chest, eyes, arm circles, and maybe even the yellow pieces on the head (hopefully not)

The yellow "v-fins" on the head would definitely be molded in color, since they're large visible items afterall.

From previous pics the large grey sliver on the middle of the rifles (on the "blade" ) are definitely stickers, and they'll be using a sticking for the flight module "cockpit" (although unlike the Kyrios and Arios the part is made of glass now, so the sticker goes underneath).

YaminoSeigi 2010-08-17 23:08

Definitely Harute's Fighter mode look the best compared to Allelujah's previous Gundams

just need to see when it will be in action

Gevurah 2010-08-18 03:01

I placed the QAN[T]'s binder on my 00 XN Raiser Eleven Sword G for some lulz.

http://www.daviddino.com/00qant01.JPG


All times are GMT -5. The time now is 19:39.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.