AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Patriot's Blade 2009-08-26 22:05

Quote:

Originally Posted by yusawateva (Post 2607086)
my f91's left cannon broke, so i decided the turn the whole suit battle damaged
it's my first time, i used the needle+fire technique, pure burning (xD), x-acto knife, and weathering masters, feel free to give comments, if you look closely, especially the left leg, you can see the burn damages, i burned the left arm too




hey, its a good representation of the mass-production F91's from Crossbone Gundam getting pawned by Seabook/Jupiter Empire

LordStrike 2009-08-27 07:40

Quote:

Originally Posted by yusawateva (Post 2607086)
my f91's left cannon broke, so i decided the turn the whole suit battle damaged
it's my first time, i used the needle+fire technique, pure burning (xD), x-acto knife, and weathering masters, feel free to give comments, if you look closely, especially the left leg, you can see the burn damages, i burned the left arm too

http://img354.imageshack.us/img354/6725/cimg5236.jpg

ohhh nice nice looks cool

SonicSP 2009-08-27 13:56

Quote:

Originally Posted by LoweGear (Post 2606934)
I also have the HG Arios, and I've never had a problem with that part. While the part does tend to "stick" in it's position on the crotch at first, a little more force will usually put it in the proper position without breaking it due to it's design. It's most likely that you didn't put it in properly - the joint that attaches it to the Arios' crotch should "click" and be freely movable.

And yes, the flight mode stand isn't really strong, but it should be stable enough to pose the Arios with no problems at all, unless you're custom modding the Arios or something.

So,it does not require you to detach and re-attach the part when switching between MS and MA?Sounds easy enough.......

I tried just rotating it from the MS default position,but it will never actually go until the point where it looks like in the MA picture.I'm actually worried that something is broken.....but the part has no problem attaching in the MS position,I just can never rotate it enough to look like its supposed MA position.

justsomeguy 2009-08-27 19:23

Quote:

Originally Posted by SonicSP (Post 2608546)
So,it does not require you to detach and re-attach the part when switching between MS and MA?Sounds easy enough.......

I tried just rotating it from the MS default position,but it will never actually go until the point where it looks like in the MA picture.I'm actually worried that something is broken.....but the part has no problem attaching in the MS position,I just can never rotate it enough to look like its supposed MA position.

I'm assuming you mean Ario's tail. That part is a bit weird, since when I move it I can feel a "pop" as if another piece was shifted.

Mr Chow 2009-08-28 01:37

Go slow padawan!!!
 
Quote:

Originally Posted by Alexus_Z3 (Post 2605952)
I never built a PG before but is it normal for having so many small part like that (seems going to be really stressfull) :heh:

http://i31.tinypic.com/2qtyccx.jpg

http://i27.tinypic.com/k1qa1g.jpg

http://i25.tinypic.com/15dudzs.jpg

http://i30.tinypic.com/11udzqd.jpg


This 00 7S looks pretty cool :love:
http://i28.tinypic.com/20as32v.jpg

Yeah the PG has more parts with high detail, just take your time and make sure you have the correct tools!! Like cutters, cutting board, sandpaper (or various grades), markers, putty filler, and tweezer and pliers! Depending on what your using to paint with - I prefer an airbrush, they can be cheap or as expensive as you want them.

But like I said at the start; take your time, I've built about three PG models in various state of decay and each one took about 1-3months to complete!!

LoweGear 2009-08-28 03:18

Quote:

Originally Posted by SonicSP (Post 2608546)
So,it does not require you to detach and re-attach the part when switching between MS and MA?Sounds easy enough.......

I tried just rotating it from the MS default position,but it will never actually go until the point where it looks like in the MA picture.I'm actually worried that something is broken.....but the part has no problem attaching in the MS position,I just can never rotate it enough to look like its supposed MA position.

Ah... if you feel that, then it means you didn't assemble that part properly. When properly assembled, it should be able to assume the MA position without too much difficulty. I've transformed the Arios lotsa times now, and I don't really think twice about moving the tail between MA and MS mode. Just try shifting the tail piece until it "locks" into place on its peg inside the Arios' crotch.

Nightwing(T_T) 2009-08-28 08:20

Hmm Plutone Really delicious :love:
http://i25.tinypic.com/v5boup.jpg

http://i26.tinypic.com/219cor9.jpg

http://i29.tinypic.com/amuot4.jpg

http://i30.tinypic.com/311npkl.jpg

http://i26.tinypic.com/n3stoi.jpg

"Limited" release....... bleh :uhoh:

Patriot's Blade 2009-08-28 10:13

^ is the Core Fighter removabel or something?

LordStrike 2009-08-28 10:16

Quote:

Originally Posted by Nightwing(T_T) (Post 2609927)


is soooo sexy i want one O_O

Flagfighter 2009-08-28 11:24

too bulky for me. i tend to like it better when the suits r streamlined

Okamidum 2009-08-28 12:26

Quote:

Originally Posted by Flagfighter (Post 2610225)
too bulky for me. i tend to like it better when the suits r streamlined

Well the Plutone was from the OOF as one of the beginning stages of CB. So it was kinda the phase before things got more streamline in the oo anime.

SonicSP 2009-08-28 13:07

http://img190.imageshack.us/img190/995/803210x.jpg

It seems that Reborns Gundam is the main name of the suit.Loved the fact that they went with this spelling.....would hate if they went with Re-Bons like the rumor awhile ago but I guess the lineart should have confirmed this a long time already.




By the way,that pic of Plutone........what is it?Magazine's custom mod?Another Dobot Damashi?

I love Plutone,seems to be the my favourite 2nd Generation Gundam.Its good to be the first Gundam equiped with the GN-Field.

Okamidum 2009-08-28 14:24

Quote:

Originally Posted by SonicSP (Post 2610387)
http://img190.imageshack.us/img190/995/803210x.jpg

It seems that Reborns Gundam is the main name of the suit.Loved the fact that they went with this spelling.....would hate if they went with Re-Bons like the rumor awhile ago but I guess the lineart should have confirmed this a long time already.




By the way,that pic of Plutone........what is it?Magazine's custom mod?Another Dobot Damashi?

I love Plutone,seems to be the my favourite 2nd Generation Gundam.Its good to be the first Gundam equiped with the GN-Field.

I'd have to say, that box art is freaking amazing.

RAVNEN 2009-08-28 17:03

Yeah,Plutone look so awesome,too bad its a limited release.:(Hopefully Bandai would kindly release a 1/100 Reborns gundam.

vektar 2009-08-28 18:12

seeing that its a limited release how do you go by getting the Plutone? in a mag like the xn raiser?

duotiga 2009-08-28 22:01

http://superrobotwar.files.wordpress...la8_hg0box.jpg

http://superrobotwar.files.wordpress...gsvgnhwbox.jpg

the remaining reveal boxart

GN0010 Nosferatu 2009-08-28 22:05

Seravee Boxart = Cosmic WIN.

LightningZERO 2009-08-29 00:57

Quote:

Originally Posted by SonicSP (Post 2610387)

Reboans? Or Reborns?

Ottocycle 2009-08-29 01:02

Quote:

Originally Posted by LightningZERO (Post 2611364)
Reboans? Or Reborns?

Well given we already know that the first letter's an "R" it should be Reborns

Else it'll be Aeboans......:heh:

Rising Dragon 2009-08-29 01:04

Quote:

Originally Posted by LightningZERO (Post 2611364)
Reboans? Or Reborns?

Quote:

Originally Posted by Ottocycle (Post 2611372)
Well given we already know that the first letter's an "R" it should be Reborns

Else it'll be Aeboans......:heh:

That and you can see the difference between the R and the A in the name. Check out the A in Gundam and you'll see.


All times are GMT -5. The time now is 02:50.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.