@StrikeFreedomV2
Correction: I meant Virtue, not Dynames. Damn! I always messed up those two names. :( I'll correct my previous post.

@Zeydra. If you really like Freedom, then build the MG first if you have any intention to buy it. That would be easier than RG Freedom.

Recently I got a bunch of new stuffs and I had to un-dust and rearrange my display cabinet, here's the result:


Now to figure out a way to fit in the MG Qan[T] and HG Banshee that I still have yet to build... :uhoh:

Nice, I see. Looking forward to get it after my A levels!

That's a lot of plamo scales and grades.

@Zeydra - The RG inner frame is a little different from the MGs, being partially assembled on the plate and only requires a few 90 and 180 twists before attaching the ABS parts. No PC plate too.

I've decided on getting a MG Strike first before building the Freedom. Thanks for the advice.

http://www.youtube.com/watch?v=BMO_bHPNJQQ&hd=1

Check that out. =)

Almost pre-ordered this back before it was out. Then I just decided to get a MG instead and wait for the MG AGE-2 and if the MG never gets the Special Ops then I will just paint it myself.

Just can't get HG's unless I really love the suits so right now pretty much limited to ZZ and Nu/Hi-Nu.

Currently finished the building of the upper half of my MG AGE-2.

I'm impressed with a transformation gimmick of sliding the core(the head, the neck and the abdomen) down(or you can it is to raise the torso armor and the arms up)
It's really give a brand new feeling since almost of the previous transformable MG such as Zeta,Z-plus,Rezel and Delta plus use a similar Zeta-ish transformation gimmick while those Wing and Epyon just use a simple way.

If Bandai could do their kits this way, I'd be one happy modeler.:heh: Who wouldn't want a 1/1 scale kit?

Nah, that would klll the fun for me :)

I am wondering why people disliked the video. It makes no sense. :confused:
I'm just guessing that the fact that I uploaded the video to my channel is why people disliked it...

What a bunch of losers...lol

Yeaaaah, I wonder that, too.....

Seconded. I even asked Sheldon Cooper regarding this matter.

Truly, his genuis mind will find an answer to this mindblowing hard qestion! :eyespin:

cut the logic....decided to do this 1st

http://i120.photobucket.com/albums/o...a83/v-dash.jpg

my ex-colleague gave me this for my pressie

http://i120.photobucket.com/albums/o...iga83/agdb.jpg

V-Dash Gundam, sweet^^ Would get one myself, but it's to fragile for my liking :( I watched rrobbert184's review and that kinda put me off. Not that's it's a bad looking kit, though. Have fun building it :D

Well, considering that I'm not into UC designs/series, I'll skip out on the V-Dash Gundam. :p

For me, I like them in this order..

Gundam 00 > Gundam Age > Gundam Wing

Just wished Bandai would give more love to the lead from Wing...You all know my reasons. The same for Gundam 00 which needs at least 1 kit, and you know which one... :p

Yeah I know which one: MG Reborns Gundam :p

I already have V & v core booster also, just doing it again lol

:naughty:

LOL

I hope you weren't seriously about that.

HINT
check my signature

@duotiga: Damn, that's so many Core Fighters :eyespin:

@nike: Well, I'M serious about a MG Reborns. 00 S2 needs a Bad Guy in MG form, IMO. Damn, I would be happy if they would make at least a GN-X III. I know there's a resin kit, but Í simply SUCK at painting. Everything beyond the clear pieces of the HG00 and NG00 lines I will screw up.

What from my list?
Thing is, I will probably display them eventually in the Gundam mode; not the transformed state.

That was for duotiga, I just edited it.

I would say the MG ER2 is more likely to be honest.

Probably more likely than the GNX III, but definitely not more than the Reborns.

How so? I mean Reborns would be very expensive for Bandai to do, whereas the ER2 would reuse molds and trees from Exia and 00 Raiser's MG's...

Maybe Reborns would be more expensive, but I believe it would sell better than another Exia. And using parts from 00 Raiser wouldn't work. The blades from the GN Swords Kai and III have different shapes.

True. But again, it'd be mostly reusing parts from those 2 MG kits. Maybe they could also give us a MG 0 Gundam..

The only piece the Exia R2 uses from the 00 Raiser is it's GN Drive :p

Um... Beam saber handles? :p
uhh~ a slightly modified GN Sword? :p
hrm.... gn particles?:p

Beam saber handles? No. The handles are the same ones the old Exia used.
GN Sword? No. Again: The shape of the blades are different. Bandai would need to make a new mold for that.
GN Particles? Yes

VICTORY IS MINE!

refer to this... http://www.youtube.com/watch?v=te7TkUzWIEE

http://img109.imageshack.us/img109/2881/rgzeta.jpg

RG Zeta

We've all seen that. It's been posted on Gundam Guy's blog already...rofl

http://i.qkme.me/1q8h.jpg

Oops.

All joking aside, that one might pique my interest just enough to make me finally break the bank to get a MG. Either that or Tallgeese. But aside from those, definitely a HG/NG/AG man myself.
I ordered all eight Gen1 AGs when they were on sale at HLJ, and I swear sitting there pushing the bits out and snapping them together was one really therapeutic evening...

I would buy the shit out of MG Tallgeese just in hopes of getting a TG II. Treize needs some MG love.

Wouldn't buy a MG Reborns. That said if Bandai ever made a 1.5 then I would so buy it. I just hate that Reborns Canon.

Exactly! Magnificent bastard needs some appreciation.
Folks have bounced around the possibility of it being like the 1/144 Tallgeese III and having the parts for all three, which would be pretty neat. Even if not, remodelling a head doesn't sound too difficult a project.
On that note, what would be great would be a new HG for it that's up to the standard of modern HGs, but I don't hold out much hope for that happening.
Yeah, I'd pretty much just display it in Gundam Mode. I do prefer the aforesaid Gundam Mode over 1.5, though [despite it being not much difference].

Wing
MG Wing Gundam Zero (TV)
MG Wing Gundam Zero 1.5/2.0
Tallgeese (w/ parts to make I, II, III)

00
MG Exia R2
MG Qan[T] ELS ver.