AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Terra 2008-01-15 07:38

Quote:

Originally Posted by Spitfire (Post 1343635)
I have a feeling it will be different with the 00 Gundams. I think all 4 main 00 Gundams have a better chance than most seed/gsd gundams of getting an MG. I don't really know why though.

Well with Seed/GSD the focus the focus was totally around the main characters. With G00 the focus is around all 4 of them despite it being said the Setsna is the main character. At least for now the series feels based around the 4 of them. And although I see Setsuna being central to G00 overall story, I don't see the other 4 dropping to the sides so long as they aren't killed. I know I'd be in heaven if there was an MG Kyrios, but I'd buy them all MG if they came out.

Spitfire 2008-01-15 07:55

Quote:

Originally Posted by sword.impulse (Post 1343788)

MG Exia would be sweet, but I think it might be awhile since theres been quite a bit of overload of it lately.

Are you kidding. At the rate their releasing 00 kits, one of the next MG's will be the Exia for sure.

DarkWarrior 2008-01-15 11:33

Quote:

Originally Posted by Spitfire (Post 1344222)
Are you kidding. At the rate their releasing 00 kits, one of the next MG's will be the Exia for sure.

Impulse got far more kits than Exia did (so far at least), but it didn't make it to MG. I'm guessing it depends on overall kit sales, something which only Bandai knows about.

Terra 2008-01-15 11:40

Impulse had multiple forms so more kits was a given.

DarkWarrior 2008-01-15 13:07

True, but even if you count only the Force Impulse model kits, there's still more than Exia.

And I would say that the possibility of a MG Exia is still up in the air, rather than a definite thing as some people are saying.

Terra 2008-01-15 13:30

Impulse was also really a Strike rip-off. G00 is a new series unlike GSD. So it definately has a higher chance.

duotiga 2008-01-17 07:18

Release today

http://www.1999.co.jp/dbimages/user/...g/10065954.jpg

http://www.1999.co.jp/eng/10065954


http://www.1999.co.jp/dbimages/user/...g/10065955.jpg

http://www.1999.co.jp/eng/10065955

Darth Atma 2008-01-17 07:34

Quote:

Originally Posted by DarkWarrior (Post 1344422)
Impulse got far more kits than Exia did (so far at least), but it didn't make it to MG. I'm guessing it depends on overall kit sales, something which only Bandai knows about.

I'm quite sure Impulse won't get any MG treatment, in the next 2-3 years.
It's design is... err... worse than Strike.:eyebrow:

What I really want in the SEED/GSD are Sword/Launcher Striker packs for MG or PG Strike

duotiga 2008-01-17 09:30

simple detail of how you mod Unicorn gundam arms & legs

http://www.hobbyfanatics.com/index.p...c=13934&st=300

Seanohue 2008-01-18 20:50

Hey I was wondering if you guys could give me some help on hand-painting. I'm painting with Vallejo acrylics thinned 1:1 with Tamiya thinner and I keep getting these little specs on the surfaces. I can't figure out where they are coming from, but I can't get rid of them! At first I thought it was particles from the cardboard surface that I am painting on, which is where I set my brush down, or the paper towls I was using to wipe things off, but after keeping the brush from touching anything but paint and plastic, I still cant get the damned things to go away. Here's a pic:

http://img101.imageshack.us/img101/5...ture026nf3.jpg

LoweGear 2008-01-18 23:09

Quote:

Originally Posted by Darth Atma (Post 1347358)
I'm quite sure Impulse won't get any MG treatment, in the next 2-3 years.
It's design is... err... worse than Strike.:eyebrow:

Nothing Bee-CRAFT can't fix. :heh: Although yes, an MG Impulse, despite it's status as a main character mech, seems slim with the recent focus on 00 and all.

dodgethis_sg 2008-01-19 00:01

Quote:

Originally Posted by Seanohue (Post 1349867)
Hey I was wondering if you guys could give me some help on hand-painting. I'm painting with Vallejo acrylics thinned 1:1 with Tamiya thinner and I keep getting these little specs on the surfaces. I can't figure out where they are coming from, but I can't get rid of them! At first I thought it was particles from the cardboard surface that I am painting on, which is where I set my brush down, or the paper towls I was using to wipe things off, but after keeping the brush from touching anything but paint and plastic, I still cant get the damned things to go away.

Which Tamiya thinner did you buy? If you're using Vallejo, you should be buying acrylic thinner, the one with white cap and labelled X-20A Arcrylic Thinner (duh).

Seanohue 2008-01-19 01:02

Quote:

Originally Posted by dodgethis_sg (Post 1350097)
Which Tamiya thinner did you buy? If you're using Vallejo, you should be buying acrylic thinner, the one with white cap and labelled X-20A Arcrylic Thinner (duh).

Yep, thats the one.

dodgethis_sg 2008-01-19 01:38

You can remove the paint with the thinner you have. Moisten a piece of paper towel or q-tip and rub off the the paint. The use a toothbrush and some dishwashing liquid to scrub and make sure the surface is lint free. If that fails, get some high concentrate (91%is good) isopropyl alcohol.

Since you're painting blue and the other surfaces are white, buy a can of matte white spray paint. The matte nature of the spray paint is very important. This will provide a good surface for your Vallejo to handbrush on nicely.

Those particles look like they are caused by beading, usually caused by too glossy a surface (most likely) or water-based paint mixing with a greasey substance (less likely).

Seanohue 2008-01-19 02:15

Quote:

Originally Posted by dodgethis_sg (Post 1350204)
You can remove the paint with the thinner you have. Moisten a piece of paper towel or q-tip and rub off the the paint. The use a toothbrush and some dishwashing liquid to scrub and make sure the surface is lint free. If that fails, get some high concentrate (91%is good) isopropyl alcohol.

Since you're painting blue and the other surfaces are white, buy a can of matte white spray paint. The matte nature of the spray paint is very important. This will provide a good surface for your Vallejo to handbrush on nicely.

Those particles look like they are caused by beading, usually caused by too glossy a surface (most likely) or water-based paint mixing with a greasey substance (less likely).

Well, definitely helps to read the specs on the paints; these are in fact water based acrylics. Just mixed some with water and it spreads perfectly!

duotiga 2008-01-19 04:18

Gundam.Info Dengeki Hobby feature 3: Gundam Sadalsuud
This week's update is Gundam 00P's Gundam Sadalsuud.

frm Gunota

dodgethis_sg 2008-01-19 04:45

Quote:

Originally Posted by Seanohue (Post 1350242)
Well, definitely helps to read the specs on the paints; these are in fact water based acrylics. Just mixed some with water and it spreads perfectly!

Actually, you can use windows cleaner as well. It works even better than water.

And that's interesting for your situation about Tamiya acrylic thinner not working for you. I've never encountered the problem you had. I've used it with Citadel and Tamiya acrylic paints as well as Vallejo and never had problems. And yes, I have used window cleaner and water with them as well without any problems.

Maybe you could post a picture of the thinner you bought and it's smell.

MakubeX2 2008-01-19 08:55

http://img165.imageshack.us/img165/4...7367030gd0.jpg

FG of the O Gundam incoming. Only via special means from a promotion campaign by Bandai.

Shiro-Oh! 2008-01-19 22:24

Quote:

Originally Posted by beamknight87 (Post 1343796)
Me patiently awaits for MG Double X

That makes two of us. Why Bandai decided to put this series under their bed and completely forget about it is beyond me.

Anyway, an MG Exia should be on the way. I mean, what better way to promote the series, right? ;)

U<3Anime 2008-01-19 23:13

X is like the only AU series that hasn't received a MG treatment yet. :<

I prefer a MG X Divider >_>


All times are GMT -5. The time now is 06:53.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.