AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Derringer 2006-11-30 15:30

Quote:

Originally Posted by theOtherGuy (Post 754172)
Well...I wouldn't say "nothing" completely...how about... Providence Zaku, Zaku Mass Production Prototype, or Noctiluca Zaku Warrior.

Those aren't model kits though. Those are conversion sets.

DarkWarrior 2006-12-01 22:22

Well, according to Bandai's hobby site, the MG S-Freedom Special Option version has been renamed to "Strike Freedom Gundam Full Burst Mode", or something along those lines. And the model kit comes with two beam shields, which is nice I guess. But the lack of pictures is frustrating me.. when will we get a decent picture of the gold plated version? Bah.

dj898 2006-12-01 22:39

been a long time no see... ^__^
I've put up my latest one on my blog.
if interested have a look.

http://blog.dreamwiz.com/dj898/5633252
http://img379.imageshack.us/img379/9547/img1255rq2.jpg

Meehlimo 2006-12-01 23:48

Yo havent seen u in a awhile welcome back thats the Ver2 right? Looks nice :D

wavehawk 2006-12-02 00:20

Quote:

Originally Posted by kct (Post 751005)
Any tutorials for GunPla around here? The parts tree is killing me (despite being mostly fine for a first-timer).

- Reminds me, I've been planning "An Idiots Guide to GunPla" for quite some time.

Based on experience, it's best if you use a plastic cutting pliers, like the ones used by Tamiya. Personally, I think that the kind of pliers sold at craft shops (the ones that do scrapbooks or beads) do well enough, and they're cheaper than the Hobby Pliers. Remember, the pliers are there to separate the part from the tree/sprue. They're not usually meant for detail work. If you have a problem trying to cut the part away from the tree, try cutting the whole section of the sprue (to seperate it from the rest of the tree), then cut off the sprue bits.\

I actually have a Dengeki Hobby mag from 2000 that shows some of these basics, plus how to use sandpaper and primer. I'll see if I can scan it in and post one of these days.

theOtherGuy 2006-12-02 03:43

Hmm...kind of reminds me of This Cow Is Purple website. I think the first one I saw was the Sword Calamity DVD (or you can find them all here).

kct 2006-12-02 05:34

Well I might as well repaint the whole thing, seems that all I need is some sandpaper-ing (which is unfortunately something I can't do right now given my work schedule, and no, GunPla is not something during the night).

duotiga 2006-12-02 08:36

Traffic-Alone's GK 1/144 Scale Astray Out-Frame D
http://www.traffic-alone.com/11-gall...OUT-D/0000.htm

Traffic-Alone's MG Kitbash Strike Gundam
http://www.traffic-alone.com/11-gall...tFree/0000.htm

Marona's MG AMX-004 QUBELEY HIGH-MOBILITY TYPE Gato use
http://manona.web.fc2.com/gal/mg_amx004hmg.html

Marona's MG RX-79(G) Ez8 Amuro Ray's color
http://manona.web.fc2.com/gal/mg_ez8arc.html

Marona's UCHG ZEON MOBILE SCOUT SET
http://manona.web.fc2.com/gal/uchg_scout_01.html

Marona's HGUC MS-09R-2 RickDom II
http://manona.web.fc2.com/gal/hguc_ms09r2_01.html

Marona's MG YMS-15 GYAN Gato Use
http://manona.web.fc2.com/gal/mg_yms15g_01.html

Marona's MG MSN-04 SAZABI HappyWedding ver
http://manona.web.fc2.com/gal/mg_msn04_01.html

Marona's MG MS-09R Gato Use RICK-DOM
http://manona.web.fc2.com/gal/mg_ms09rg_01.html

duotiga 2006-12-02 08:50

more on full cross crossbone

http://img143.imageshack.us/img143/7...487729bwv8.jpg

HGUC TR-5
http://img330.imageshack.us/img330/2228/ddua8.jpg
http://img67.imageshack.us/img67/9633/dddai0.jpg

LightningZERO 2006-12-02 10:03

I regretted buying my Crossbone Ver Ka. Is this new Crossbone the same with the Ver Ka but with more equipments?

Derringer 2006-12-02 12:43

Quote:

Originally Posted by LightningZERO (Post 756442)
I regretted buying my Crossbone Ver Ka. Is this new Crossbone the same with the Ver Ka but with more equipments?

Yes. There will be probably be another release as well with other equipment.

kazi_kage 2006-12-02 20:07

Model Scissors
 
I know that not having scissors for a model kit is pathetic, but I've been making due with a large set of exacto blades. Anyway, I've been wondering if anyone knows about a website to get them....if so, can you send me a PM? Thank you in advance!!!!

M_Flores 2006-12-02 20:22

Quote:

Originally Posted by M_Flores (Post 751888)
I'd be surprised, but very pleased if the SP Options also included another beam shield, like the other SFs never had v_v;...

Quote:

Originally Posted by DarkWarrior (Post 755967)
Well, according to Bandai's hobby site, the MG S-Freedom Special Option version has been renamed to "Strike Freedom Gundam Full Burst Mode", or something along those lines. And the model kit comes with two beam shields, which is nice I guess. But the lack of pictures is frustrating me.. when will we get a decent picture of the gold plated version? Bah.

The little extras like that which just add more icing to the cake :D .

Anyways, it's December already, meaning it's only a matter of time now. Be patient, no more need for pics when the real thing is already on its way!

kct 2006-12-02 23:21

http://img241.imageshack.us/img241/8...re36hm2.th.jpg

Am I doing this wrong?

dj898 2006-12-03 04:23

...
..
.











.
..
...

Akyra 2006-12-03 09:41

So the full burst SF is not limited to first run anymore right? IF that's true, the HK people won't be inflating the prices cos of the whole excess demand thing.

MakubeX2 2006-12-03 16:54

http://img75.imageshack.us/img75/942...8442316dq9.jpg

From :-

https://bandai-hobby.net/news/index.html

Just one more day before we'll see some real samples of the SP. Hopefully, Bandai will prove my theory wrong.

Also :-

http://shop2.genesis-ec.com/search/i...7&item=mgsd002

Release Date 21/12. They are driving the price up to 13000 yen ?

RPNS 2006-12-03 19:18

I am sorry if this is a little late but I just saw the linear art for MG Hi-v Gundam or should I say LOW-v Gundam and was wondering what was the general reaction (both in the forum and Japan) bout it?

M_Flores 2006-12-03 20:22

Quote:

Originally Posted by RPNS (Post 757740)
I am sorry if this is a little late but I just saw the linear art for MG Hi-v Gundam or should I say LOW-v Gundam and was wondering what was the general reaction (both in the forum and Japan) bout it?


Lots of people orgasmed. That's for sure.

fujima 2006-12-03 20:48

Hello, I would like to ask which of the 1/144 HG SEED/DESTINY models come with stands (not 1st edition).

On the top of my head I can think of;
Infinite Justice
Destiny
Strike Noir
Stargazer
Murasame + Andy's one
Blu Duel

Is there any others? Any help will be much appreciated, Thanks.

Critias 2006-12-03 22:50

Abyss
Gouf Ignited (Heine's and mass productions)
DOM Trooper
Verde Buster

That's all I know of that arent on your list.

Meehlimo 2006-12-03 23:15

Quote:

Originally Posted by kct (Post 757006)

Nothing wrong that i can see you could try sum pannel lining tho it would make it look extra nice :D

dj898 2006-12-04 00:22

Botoms Style Mono-Eye mod.
 
http://www.traffic-alone.com/11-gall...4Shot/0000.htm

Ok first thing first. This modification is based on the example shown above site.

And for this conversion MG Aggoy that happened to be near by was scarified. ^__^

http://img220.imageshack.us/img220/3478/img1266yi2.jpg
http://img220.imageshack.us/img220/5534/img1267gl9.jpg

Put simply you need Kotobukiya #14 and #9 flat verniers. Once cut the pla-plate in shape and glue them onto I just used the Gundam Marker Chrome Silver - coz I was lazy. heh
For H-Eyes I used the large diamond-cut clear one and small pink round face one from my usual junk box. You don't need to glue H-Eyes as they are just right size and held well inside without using the glue.

As said this mod was really for Botomz kits but imho works well with Zeon mono-eye MS. What do you think?

http://img220.imageshack.us/img220/5734/img1270ql8.jpg

And the one more shot this time using the flash - dame! due to the angle the mono-eye s don't lighten up... oh well... -__-;

http://img462.imageshack.us/img462/4157/img1268ki7.jpg

kct 2006-12-04 02:05

Quote:

Originally Posted by Meehlimo (Post 757901)
Nothing wrong that i can see you could try sum pannel lining tho it would make it look extra nice :D

That is why the BSG wasn't there, because i started panel lining it right after I took that pic. The wing and thruster parts were taken off hours after the pic was taken for the same reason.

M_Flores 2006-12-04 06:39

Not sure if this has been posted

pics of normal MG SF
http://ruliweb2.dreamwiz.com/ruliboa...=&ftext=&left=

kct 2006-12-04 08:38

Seems that the joints looks similarl to the 1/60 Lightning S-Freedoms.

duotiga 2006-12-04 08:59

Toymaker's Raven (MG Sazabi Conversion)
http://toymakerinc.blogspot.com/2006...onversion.html

MakubeX2 2006-12-04 09:27

Somebody is leet enough to convert the Rafflesia Stand from the MG F91 to a 1/100 Rafflesia.

http://page11.auctions.yahoo.co.jp/jp/auction/n49184306
http://img436.imageshack.us/img436/8...3921rp0.th.jpg

kct 2006-12-04 10:34

Yeah, that was one heck of a good conversion.

Meehlimo 2006-12-04 11:11

WOW thats pretty damn good to make a stand into a standalone MA.

RPNS 2006-12-04 12:08

NEW HI-NU gundam pics
http://www.hobbyfanatics.com/index.p...=post&id=16292

LoweGear 2006-12-04 12:13

Must say, Hi Nu looks better in Nu colors...

kazi_kage 2006-12-04 15:20

i got a few replys for the gundam scisors.....anyway, i found a site on my own that sells the so called 'Gundam Nipper Clipers'n (greatest/weridest name ever!!!)....god i hope that they do the trick, but thanks for the comment....:p :D

kct 2006-12-04 17:36

Quote:

Originally Posted by RPNS (Post 758330)

Nu is made to like, look at the pics >.> .

MakubeX2 2006-12-04 17:37

Confirmation from Bandai that the MG SF SP is not some Limited Edition Kit :-

12月発売の「MGストライクフリーダム」について
お客様からのお問い合わせ
「MGストライクフリーダムガンダム」が12月発売となりますが、小冊子等が付属する
スペシャルタイプは限定商品なのでしょうか?

相談センターからの回答
いよいよ発売となる「MGストライクフリーダムガンダム」。通常版とともに特別版が
発売されますが、こちらは通常商品同様、再生産を行う商品となっております。
そのため、限定版ではございませんので、ご承知おきください。

Shinji103 2006-12-04 17:51

Quote:

Originally Posted by duotiga (Post 758199)
Toymaker's Raven (MG Sazabi Conversion)
http://toymakerinc.blogspot.com/2006...onversion.html

That looks like something off of Dragonar with the winged backpack.

And it reminds me a lot of the Gilgazamune from Dragonar. lol

sx3 2006-12-04 19:06

Quote:

Originally Posted by kct (Post 758640)
Nu is made to like, look at the pics >.> .

question,the hi-nu(this model) was made by non other than the creater him/herself right? i forget i read taht soemwhere, maybe we will FINALLY find out what the REAL rifle looks like and where the beam saber is ACTUALYL located. these are questions ive always had on the hi-nu. ive wnated to see the gun and beam saber forever XD

Meehlimo 2006-12-04 21:32

Quote:

Originally Posted by LoweGear (Post 758338)
Must say, Hi Nu looks better in Nu colors...

I agree one of the reaosn NU is so cool is its color scheme.

LoweGear 2006-12-04 23:30

Quote:

Originally Posted by sx3 (Post 758717)
question,the hi-nu(this model) was made by non other than the creater him/herself right? i forget i read taht soemwhere, maybe we will FINALLY find out what the REAL rifle looks like and where the beam saber is ACTUALLY located. these are questions ive always had on the hi-nu. ive wanted to see the gun and beam saber forever XD

Yup, Yutaka Izubuchi is in charge of design for this kit, so he's basically redesigning his Hi-Nu design.

sx3 2006-12-05 02:14

Quote:

Originally Posted by LoweGear (Post 758919)
Yup, Yutaka Izubuchi is in charge of design for this kit, so he's basically redesigning his Hi-Nu design.

sexy, maybe ill my minds questions will be answered :) ive always wondered those 2 quetsions since ive seen teh hi nu -.-


All times are GMT -5. The time now is 06:24.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.