AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Setsuna.F.Seiei 2009-03-14 02:19

can anyone tell me wats the latest release of the 00 series?(is it the 1/100 seravee)

RAVNEN 2009-03-14 02:20

Yeah,I agree with Lowe.:D
Sadly I don't have other MSG 00 gundam,it would be perfect evolution lineup.;)

Heh,my Phantom Pain trio....
http://img16.imageshack.us/img16/1618/picture020wmt.jpg

Can resist pit together Astraea & Gundam MK II...

http://img407.imageshack.us/img407/2...ure022a.th.jpg

Setsuna.F.Seiei 2009-03-14 02:34

by the way...can anyone list out all the tools i need for gunpla?

LoweGear 2009-03-14 02:35

Quote:

Originally Posted by Setsuna.F.Seiei (Post 2271742)
can anyone tell me wats the latest release of the 00 series?(is it the 1/100 seravee)

Latest release is indeed the 1/100 Seravee. Only kit left to be released from the announced line is the HG 1/144 Ahead Smultron. Of course, we'll have to see what other kits are to be announced in this month's model magazines.

GNWeapon 2009-03-14 02:42

Looking forward to Bandai announcing the HG 1/144 0 Gundam, Masurao/Susanoo kits.

LightningZERO 2009-03-14 02:52

There's the Trans Am Raiser set coming soon too

GNWeapon 2009-03-14 02:54

Quote:

Originally Posted by LightningZERO (Post 2271778)
There's the Trans Am Raiser set coming soon too

But wouldn't that be gloss injected version? I'm still wanting to see more pics of that gloss-version before getting it for the Sword III.

LoweGear 2009-03-14 03:16

We do have this image of the Trans-Am color Gloss Injection ver.:

http://i203.photobucket.com/albums/a...ai-gp0053L.jpg

It's basically the same colors used on the HG Trans-Am S1 Gundams.

MakubeX2 2009-03-14 03:35

http://img5.imageshack.us/img5/766/1236999941433.jpg

MG Gouf Ver 2.0 to be next MG to be out ?

Dan the Man 2009-03-14 04:06

Quote:

Originally Posted by Setsuna.F.Seiei (Post 2271759)
by the way...can anyone list out all the tools i need for gunpla?

Well, I don't know about everyone else, but I can list the tools I use and how I use them...

1. Wire cutter - Essential to cut the pieces out of the tree. Try to make sure it's a small-headed cutter, as the big fat headed cutters won't fit inbetween the parts.

2. Hobby Knife - Necessary to trim the excess plastic off of a piece. With the larger chunks of leftover plastic, you can use your clippers again and just pop the piece off, but the knife is usually your best bet to remove the stuff. And for God's sake, be careful! Finger cuts suck. Bad.

3. Sandpaper - Another good choice for cleaning up a piece. It can help fade any nasty marks the hobby knife might make while trimming plastic. Varying kinds of coarseness are recommended, but I get by with a light grade.

4. Paint Markers - While any kind will do the job, one of the easiest to use is the Gundam Marker type. Most sites/stores that sell the kits will have the markers, too. The paint on these markers dries within about twenty seconds, so it makes basic painting a sinch. Testor paint markers work really well too, though they take a few minutes longer to dry at the least.

5. Ultra-Fine Tipped Sharpie - Essential for panel lines. They have actual Gundam Markers with a point that small, but the Sharpies are a hell of a lot cheaper and do the same job just as good.

6. Screwdrivers - Some kits will contain screws on them, like many Master Grade kits, but the flathead screwdriver will be your best friend should you need to pry an assembled piece apart. Just be careful not to warp the connector pins on the pieces, because those could snap very easily. Remember to be careful.

Those are my basic tools. As most anyone here will tell you, a good glue is a priority too. I use a kind called Tamiya Cement.
Spoiler:


Once you get past all of that, more paint would be needed, along with airbrushes, primers, modeling putty, etc., etc...

So there you go! Hope it helps.

Setsuna.F.Seiei 2009-03-14 08:42

hey thanks!!! its sure is a big help!! one more question...do u spray something tat sort of remove the gloss of the plastic?(i think its something call finishing spray)

Setsuna.F.Seiei 2009-03-14 08:47

but the design is almost the same as my 00 raiser HG designer colour version!! so can i make the GNblade3 by myself?

duotiga 2009-03-14 09:04

Quote:

Originally Posted by Setsuna.F.Seiei (Post 2272077)
but the design is almost the same as my 00 raiser HG designer colour version!! so can i make the GNblade3 by myself?

dude...is the same design, just in different color + gloss + gn sword III.

Anything is possible by pla plates

ashtaron 2009-03-14 10:39

New pics of Seravee/Seraphim assembled and unpainted can be viewed here: http://d.hatena.ne.jp/type97/20090314/p1

Tormenk 2009-03-14 11:29

Quote:

Originally Posted by LoweGear (Post 2271797)
We do have this image of the Trans-Am color Gloss Injection ver.:

http://i203.photobucket.com/albums/a...ai-gp0053L.jpg

It's basically the same colors used on the HG Trans-Am S1 Gundams.

I thought this was for the Robot Damashii version? Cant rmb the source but I've seen the HG version sporting a red-lined blade instead of blue.


----

Uncovering of the PG Red Frame box. Check out the boxart as well.

http://blog.goo.ne.jp/ossan-obahan1-...247cdb3cbee754

LoweGear 2009-03-14 11:36

Quote:

Originally Posted by Tormenk (Post 2272257)
I thought this was for the Robot Damashii version? Cant rmb the source but I've seen the HG version sporting a red-lined blade instead of blue.

Given that the Robot Damashii already has a Trans-Am version, which didn't have the GN Sword III, and that the HG Trans-Am Raiser is the only version ever announced to have a GN Sword III, this is undeniably the HG version. You can also see several parts of this model that are unpainted and without panel lining (like the arms and feet), something that the Robot Damashii models already have by default. The proportions and coloration of the Robot Damashii model is also different (the Damashii is a much darker red).

Also, if you can point me to the image you saw of a red-lined GN Sword III, I'll be happy to see it. However, the only red blade I remember from any model is the massive beam blades for the GN Sword II on the Robot Damashii.

Tormenk 2009-03-14 11:50

Quote:

Originally Posted by LoweGear (Post 2272266)
Also, if you can point me to the image you saw of a red-lined GN Sword III, I'll be happy to see it. However, the only red blade I remember from any model is the massive beam blades for the GN Sword II on the Robot Damashii.

Stolen from Ngee Khiong. Image is cut off on the right side but shows the Trans-Arm 00 Raiser holding the red blade.

http://farm4.static.flickr.com/3399/...27e6e4.jpg?v=0

Though I must admit I only noticed the blue-tinged blade of the TA 00 Raiser in the foreground just now when typing this post. :heh:

LoweGear 2009-03-14 11:53

Ah... the Red Blade is the effects part for the Raiser Sword. It was shown before as a colorless sheathe in the initial pics of the Trans-Am Raiser. You will notice that the red blade has a far different shape and size to the standard GN Sword III. :heh:

Tormenk 2009-03-14 11:55

So..there are two different blade effect parts for the GN-Sword III? :heh:

LoweGear 2009-03-14 11:57

The first transparent part for the GN Sword III is the main solid blade edge which is molded in blue, and is less an effect part as it is an integral part of the sword (like the GN condensers being clear). The red Raiser Sword part is the effects part. :)


All times are GMT -5. The time now is 09:55.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.