AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Kitaeryu 2010-08-08 23:20

I still wish that the Harute kept its old design and had more resemblance to a fighter jet like its predecessors =/

GN0010 Nosferatu 2010-08-08 23:24

It...it does look like a fighter jet though...

Kitaeryu 2010-08-08 23:28

Looks more like a spaceship to me XD
Something about the stubby nose and swept-forward wings...

http://a21.idata.over-blog.com/300x1...ailer_0002.jpg

I liked it better when it was like this =D

Hopefully the design will grow on me once i see it in action XD

ID555 2010-08-08 23:31

Quote:

Originally Posted by Kitaeryu (Post 3181719)
Thanks ID555!

Based on your response, I would assume that you could spray the topcoat after full assembly. I was thinking of spraying when it is fully assembled but was afraid the topcoat might not get into tight areas/be blocked by other pieces resulting in patches without any topcoat.

I would prefer to spray while it is assembled because i don't have anything to hold the individual pieces for spraying. However, since i'm using topcoat to make the plastic feel better and not to actually protect any paint (i will be panel lining it though), is it significantly better to spray while its disassembled though?

Nah, I think your plan to spray internal frame once, then another time with armor on is good enough.

Kitaeryu 2010-08-08 23:33

Once again, thank you ID555 =]

GN0010 Nosferatu 2010-08-08 23:35

Quote:

Originally Posted by Kitaeryu (Post 3182298)
Looks more like a spaceship to me XD
Something about the stubby nose and swept-forward wings...

http://a21.idata.over-blog.com/300x1...ailer_0002.jpg

I liked it better when it was like this =D

Hopefully the design will grow on me once i see it in action XD

Well...Harute is a space use mobile suit afterall.:p

ID555 2010-08-08 23:40

Quote:

Originally Posted by Kitaeryu (Post 3182302)
Once again, thank you ID555 =]

Oh, you don't have to. ;)

cf18 2010-08-09 11:22

At Gundam Expo Tokyo 2010

HGUC Gouf Custom! November, 1600 yen
http://ga.sbcr.jp/mreport/015461/images/02.jpg
http://ga.sbcr.jp/mreport/015461/

RG Char's Custom Zaku
http://ga.sbcr.jp/mreport/015462/images/01.jpg
http://ga.sbcr.jp/mreport/015462/

MG Rezel
http://ga.sbcr.jp/mreport/015460/images/02.jpg
http://ga.sbcr.jp/mreport/015460/

HGUC Delta Plus
http://ga.sbcr.jp/mreport/015459/images/02.jpg
http://ga.sbcr.jp/mreport/015459/

00 Movie (Mass production 00-riser?)
http://ga.sbcr.jp/mreport/015464/images/08.jpg
http://ga.sbcr.jp/mreport/015464/

Gunpla builder:
http://ga.sbcr.jp/mreport/015465/

Limited stuff:
http://ga.sbcr.jp/mreport/015458/

LoweGear 2010-08-09 11:48

You forgot these other entries - The HG Brave Commander Test Type and Standard Test Type:


SonicSP 2010-08-09 14:03

I REALLLLYYYY hope they've improved the 0 Raiser connection mechanism for the new HG 00 Raiser........version. It would be worth if it even if they did just that.

Doesnt look much different, still connects to the same place. But I'm still praying for a lock or something in the new........Drive-Replacements. It could be possible.

ZeddNL 2010-08-09 14:04

That commander type sure looks to have a Twin Drive system.

Anyway im liking the rough RG Zaku 2 already; let alone in a few months.

GN0010 Nosferatu 2010-08-09 15:37

Quote:

Originally Posted by ZeddNL (Post 3183166)
That commander type sure looks to have a Twin Drive system.

Anyway im liking the rough RG Zaku 2 already; let alone in a few months.

It doesn't, as far as we know.

justsomeguy 2010-08-09 16:33

Quote:

Originally Posted by SonicSP (Post 3183165)
I REALLLLYYYY hope they've improved the 0 Raiser connection mechanism for the new HG 00 Raiser........version. It would be worth if it even if they did just that.

Doesnt look much different, still connects to the same place. But I'm still praying for a lock or something in the new........Drive-Replacements. It could be possible.

Actually, there seems to be an extra connection to the top of the drive pylons. Of course, I'm not gonna buy this because I have 3 HG 00 Raisers already, and this looks to be the lamest variation.

bio9205 2010-08-09 20:06

NO CLEAR GREEN PARTS FOR HARUTE? WHAT? THIS IS DISCRIMINATION!

I do hope Harute's parts hold together in MA mode, though. It looks sexy. I'm already quite put off by its thigh connection... Bleh.

solidvanz 2010-08-09 20:58

00V Senki Version of 00 Qan[T] (Debut on 25/12/2010 in Hobby Japan 2/2011)!
http://a.imageshack.us/img401/2263/376100.jpg

velocity7 2010-08-09 21:10

http://naomi.thewafflehouse.net/blog...exia-r2-parts/

I kitbashed Astraea with an Exia R2, heh. Astraea HG conversion kit that is, not the Astraea HG that's out there right now.

GN0010 Nosferatu 2010-08-09 21:24

Looks like everyone wishing the 00 Qanta had duel shield binders is gonna get their wish.

rocawarde 2010-08-09 21:46

Quote:

Originally Posted by GN0010 Nosferatu (Post 3183680)
Looks like everyone wishing the 00 Qanta had duel shield binders is gonna get their wish.

Yay and judging by the pic it looks like they added the Beta version of Qanta shield and bits from the very first trailer :hyper-^v^:

LoweGear 2010-08-09 21:48

It doesn't really look the same to the early draft of the 00 Qan[T]'s shield though :heh:

December's a long way down though, so we'll have 4 months to speculate on what that thing on its shoulder is.

velocity7 2010-08-09 22:08

Gonna go on a limb and say it's a Seven Sword pack. The two weapons on top might be GN Long/Short Swords, and the thing holding them might be a GN Buster Shield. Wouldn't know what other weapons are being packed.

GN0010 Nosferatu 2010-08-09 22:21

If the GN Sword IV is gonna appear anywhere, it'll be that 00V.

rocawarde 2010-08-09 22:25

Aww nuts velocity7, that's what i wanted to say myself:heh:

Yeah LoweGear, I wasn't expecting the same thing but more like the concept of having GN bits that you could grip. I hope they all are condenser blades tho.


Yeah all the way xmas :(

Rising Dragon 2010-08-09 22:26

Gotta go with Nosferatu on that...

LightningZERO 2010-08-10 04:21

00 Raiser Capacitor Type? The extend of the reuse and remold of the 00 mold is really ridiculous...

Chiu_fan 2010-08-10 07:31

Here's a really nice 00 Qan[T] mod I found.
http://www.geocities.jp/hobby_no_toriko/DSCF4103.JPG

ZeddNL 2010-08-10 07:38

Quote:

Originally Posted by Chiu_fan (Post 3184446)
Here's a really nice 00 Qan[T] mod I found.
http://www.geocities.jp/hobby_no_toriko/DSCF4103.JPG

Damn, I want to make that.

solidvanz 2010-08-10 07:43

Japanese Artists with Custom MSs:

LoweGear 2010-08-10 08:38

Quote:

Originally Posted by ZeddNL (Post 3184449)
Damn, I want to make that.

From the pics, it's actually quite simple:

- Get two HG 00 Qan[T]'s and an HG 00 Gundam (if you don't have one already)
- Attach 00 Gundam's backpack + GN Drive Arms to the 00 Qan[T]. Should require a little bit of glue.
- Attach 00 Qan[T] shields to the drive arms and presto, 00 Qan[T] Twin Shield Edition :D:eyespin:

Chiu_fan 2010-08-10 08:48

^
Don't forget to drill a hole in the back to attach the 0 Raiser.

LoweGear 2010-08-10 09:28

Quote:

Originally Posted by Chiu_fan (Post 3184512)
^
Don't forget to drill a hole in the back to attach the 0 Raiser.

You're using the 00 Gundam's backpack for the mod, so no need to drill a hole.

The mod will remove the ability for the shield to be linked with the backpack though... until someone manages to create a mod that maintains the 00 Qan[T]'s drive arms and backpack while doubling the shields :heh:

ZeddNL 2010-08-10 09:44

Quote:

Originally Posted by LoweGear (Post 3184498)
From the pics, it's actually quite simple:

- Get two HG 00 Qan[T]'s and an HG 00 Gundam (if you don't have one already)
- Attach 00 Gundam's backpack + GN Drive Arms to the 00 Qan[T]. Should require a little bit of glue.
- Attach 00 Qan[T] shields to the drive arms and presto, 00 Qan[T] Twin Shield Edition :D:eyespin:

Oh I knew it won't be hard.
And I think modding 00Q's backpack for 2 mounts wont be too hard if you have decent glue; according to the manuals they are almost the same anyway.

SonicSP 2010-08-10 17:54

Quote:

Originally Posted by LightningZERO (Post 3184253)
00 Raiser Capacitor Type? The extend of the reuse and remold of the 00 mold is really ridiculous...

Agreed, though I'm waiting to see if they've improved the Raiser binder mechanism with the new Drives at least but this one feels like a total waste of money ATM.

Quote:

Originally Posted by LoweGear (Post 3184498)
From the pics, it's actually quite simple:

- Get two HG 00 Qan[T]'s and an HG 00 Gundam (if you don't have one already)
- Attach 00 Gundam's backpack + GN Drive Arms to the 00 Qan[T]. Should require a little bit of glue.
- Attach 00 Qan[T] shields to the drive arms and presto, 00 Qan[T] Twin Shield Edition :D:eyespin:

Quote:

Originally Posted by ZeddNL (Post 3184587)
Oh I knew it won't be hard.
And I think modding 00Q's backpack for 2 mounts wont be too hard if you have decent glue; according to the manuals they are almost the same anyway.

What requires glueing then, the backpack. Some trouble fitting? And how reversible is this, incase I may want to turn it into 00Q basic again, if its possible that is.




While we're on the subject of 00Q, I also have to ask. Are the Sword Bits wieldable? Are any of them at all wieldable by the hands?

StrikeFreedomV2 2010-08-11 00:29

Quote:

Originally Posted by SonicSP (Post 3185348)
Agreed, though I'm waiting to see if they've improved the Raiser binder mechanism with the new Drives at least but this one feels like a total waste of money ATM.





What requires glueing then, the backpack. Some trouble fitting? And how reversible is this, incase I may want to turn it into 00Q basic again, if its possible that is.




While we're on the subject of 00Q, I also have to ask. Are the Sword Bits wieldable? Are any of them at all wieldable by the hands?

According to gundam.tk's review, they are wieldable.

bio9205 2010-08-11 02:21

Quote:

Originally Posted by LightningZERO (Post 3184253)
00 Raiser Capacitor Type? The extend of the reuse and remold of the 00 mold is really ridiculous...

I think we established that a long time ago...

Quote:

Originally Posted by SonicSP (Post 3185348)
While we're on the subject of 00Q, I also have to ask. Are the Sword Bits wieldable? Are any of them at all wieldable by the hands?

Yes they are. Just not sure if all of them can be hand held.

I'm really hoping for trans clear coloured parts for Harute: Specifically his green GN blade and purple visor. It would really suck if those were just trans clear...

Kitaeryu 2010-08-11 02:52

I'm REALLy hoping that the 00Q variant is released in 1/100 scale and is not limited, and not like the awesome XN raiser which was only released as a limited 1/144.

I think its a pity that Bandai doesn't make more models of the 00 side stories, I find their designs to be particularly awesome, even as good as the main series designs.

LoweGear 2010-08-11 05:13

Quote:

Originally Posted by SonicSP (Post 3185348)
While we're on the subject of 00Q, I also have to ask. Are the Sword Bits wieldable? Are any of them at all wieldable by the hands?

Only two of the Sword Bits can be properly wielded by hand. However it seems to be more of an accident in design, since the "handles" on the Sword Bits used to hold them on the HG 00 Qan[T] are also the primary connection points for the larger Bits in Buster Sword and Buster Rifle form. And of course, said connectors are conspiciously absent from the actual drawing of the Bits themselves, leading me to believe they're a model-kit only concession. :heh:

kaizerknight01 2010-08-11 05:41

http://www.youtube.com/watch?v=t1x_Z5kB9OU

ZeddNL 2010-08-11 06:31

Quote:

Originally Posted by SonicSP (Post 3185348)
What requires glueing then, the backpack. Some trouble fitting? And how reversible is this, incase I may want to turn it into 00Q basic again, if its possible that is.

Left is 00Raiser's manual, Right 00Q:
http://i35.tinypic.com/dgqi3m.png

So with cutting off some pegs you can glue them, if you are a good modeler I would rather mod 00Q's backpack to have the mounts but still, It should be pretty easy.

MakubeX2 2010-08-11 08:55

http://img820.imageshack.us/img820/4...1529905980.jpg

1/72 Kshatriya By G-system. You can clearly see how huge it is with the 1/144 at it's feet literally.

Winchester 2010-08-11 09:01

I think I'd rather wait and see what the 00V version looks like before trying to permanently mod a 00Q - I hate ruining kits, I've spent way too much on regular plastic models that turned out crappy.

Right now I'm building a HGUC Hi-Nu, a complete break from my current collection which is all 00 so far. I've also got a HG Gundam X for my next build, and I'm expecting a couple of long term projects to show up any day now (an MG Unicorn and an MG Ex-S, gifts from a friend...)

I think I'll need to up my pace from two HG kits per month...

SP


All times are GMT -5. The time now is 20:29.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.