AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

GrahamAker 2009-10-08 08:14

hg 00 line is far from over! transarm reborns, masurao/suswanoo, gnz series are yet to come!!!!!!!!!

KaiDamien 2009-10-08 08:46

Quote:

Originally Posted by LoweGear (Post 2691096)
Technically that other MS shown is not the back, it's the alternate form of the Mirage Frame, where the head, arms and feet flip around, however it's still facing the front.

Ah cool thanks =)

Amber.Dawn 2009-10-08 23:20

Tempted to get the PG now...in addition to Blue Frame, and many more.
My poor wallet...

Ardi220288 2009-10-08 23:44

58 runners.....

http://i36.tinypic.com/vicsg7.jpg

they should've used wider table for this one :heh:

MakubeX2 2009-10-08 23:58

I can still point out certain faults here in regards to the PG OOR sample here :-

1) Why does the panelings seems to be mainly concerntrated on the O Raiser unit now. The OO, in contrast, seems too "clean".

2) Either the legs of the OO is too short or it's arms are too long. In any case, the arm seem to be reaching the knee, making the entire unit too ape-ish instead of humanoid.

3) Look at the circled part below :-

http://img199.imageshack.us/img199/9...5014439577.jpg

This is what I suppose is a GN Particle Radiator Fin from the anime. And it looks to be too certain to be made up of what can be call one single plastic instead of multiple pieces in which PG is well-known for. Evidence of Bandai scrimping on parts to maximise their profit here.

Nightwing(T_T) 2009-10-09 00:02

http://i37.tinypic.com/j6sa5z.jpg

http://i37.tinypic.com/1znbp7o.jpg

http://i36.tinypic.com/2ngub9x.jpg

http://i38.tinypic.com/331gcgw.jpg

http://i36.tinypic.com/261nv5c.jpg

http://i38.tinypic.com/21mdkci.jpg

http://i34.tinypic.com/2e4c0hy.jpg

http://i36.tinypic.com/1fd30n.jpg

http://i38.tinypic.com/2gu04sz.jpg

http://i33.tinypic.com/2zthfr5.jpg

http://i35.tinypic.com/2mr7kfm.jpg

http://i35.tinypic.com/2yvnupl.jpg

http://i37.tinypic.com/20rr08y.jpg

http://i34.tinypic.com/2hrd3qf.jpg

From ngeekhiong:
Quote:

- Pelvis joint can swing upwards (is a die cast part I believe)
- Plated parts for the blade of GN Sword II
- Linked component between the shoulder joint and shoulder block can be observed
- Clear part set will be a Bandai Hobby Online Shop limited item. Pre-order period is between September 28th and January 2010. 3,500 Yen (inclusive of tax) I think.

SonicSP 2009-10-09 03:17

Wow,it's beautiful...........

Now if it will only have great articulation and posability and it really will be perfect.

Rising Dragon 2009-10-09 03:28

Quote:

Originally Posted by MakubeX2 (Post 2692891)
3) Look at the circled part below :-

http://img199.imageshack.us/img199/9...5014439577.jpg

This is what I suppose is a GN Particle Radiator Fin from the anime. And it looks to be too certain to be made up of what can be call one single plastic instead of multiple pieces in which PG is well-known for. Evidence of Bandai scrimping on parts to maximise their profit here.

Actually, that's, um, the outer plating of the GN-Shield.

EDIT: Also, through comparing the above picture with the official lineart of the 00 Gundam, the arms and legs look to be quite in proportion. I think its just the angle of the camera that makes it look ape-ish, as depicted in Nightwing's first image.

SonicSP 2009-10-09 03:35

Is he referring to the 0 Raiser's Clevical Antennas's or the GN-Shield?

Rising Dragon 2009-10-09 03:38

Quote:

Originally Posted by SonicSP (Post 2693308)
Is he referring to the 0 Raiser's Clevical Antennas's or the GN-Shield?

I think Makube mistook the GN-Shield for the 0 Raiser's large Clavicle Antenna.

GN0010 Nosferatu 2009-10-09 04:03

That is absolutely beautiful, I fucking love it. Never will we get a better detailed 00 Raiser.

Are those missile pods by the way? In the 8th picture down.

darkstrife 2009-10-09 04:09

Quote:

Originally Posted by Amber.Dawn (Post 2692799)
Tempted to get the PG now...in addition to Blue Frame, and many more.
My poor wallet...

i know what ur going thru amber lol, i just recently bought a MG unicorn (yet to build) and i'm also tempted to get the PG 00 AND the MG blue astray. i have the money, but to spend so much on gundam models... i don't know lol

the PG 00 does look super kickass, 58 runners is more than twice a normal MG kit so its quite a lot, for some reason i'm tempted to get the clear parts as it seems that the clear parts have light shades of different colours which will make the model look better rather than if all the clear parts were just plain clear

Rising Dragon 2009-10-09 04:14

Quote:

Originally Posted by GN0010 Nosferatu (Post 2693348)
That is absolutely beautiful, I fucking love it. Never will we get a better detailed 00 Raiser.

Are those missile pods by the way? In the 8th picture down.

Yes, they are. They can be attache to the 0-Raiser's wing binders and clavicle antennae.

MakubeX2 2009-10-09 04:46

Quote:

Originally Posted by Rising Dragon (Post 2693288)
Actually, that's, um, the outer plating of the GN-Shield.

After looking at the rest of the promo pix, you're right.

But my point about Bandai slacking off still stands, I mean you will expect them to add more internal details via more parts instead off just slapping all of them onto one single piece. Especially after what they demand of you in term of monetary terms.

PS :- The more I look at it, the more I think the Perfect Grade is just an experimental platform Bandai is using for their MG and HG line. And people who buy the PG is funding their R&D department.

Now,the point I'm trying to put across here is to expect a MG of the OOR to be better looking than the PG here at a more economical rate as well.

Aoi Toori 2009-10-09 05:01

It's really beautiful, if only that's cheaper I'll definitely buy it.. ><

Uh, maybe I'll ask my girlfriend to buy it for me :heh: lol

Tormenk 2009-10-09 05:05

Eh hollow areas are a thing of HGs, not PGs but whatever. I'm not buying it so no loss to me.

I'm only interested in seeing if the joints for the drives can actually support the Raiser wings now that they pack alot more weight with a solid frame inside.

GN0010 Nosferatu 2009-10-09 05:25

I gotta say, after viewing these pictures, I'm more at ease with the 00 Raiser design. It's really not that bad.

LordStrike 2009-10-09 06:40

wen is that beauty coming out? i wish i had the cash for it

astranagun 2009-10-09 07:06

Quote:

Originally Posted by LordStrike (Post 2693542)
wen is that beauty coming out? i wish i had the cash for it

It should come out the 28th of november

http://i34.tinypic.com/2hrd3qf.jpg

or the 25th of the same month
http://i38.tinypic.com/2gu04sz.jpg

Akyra 2009-10-09 08:05

Sorry, to get you guys to repeat again, but what's the other first edition goodie?


All times are GMT -5. The time now is 13:40.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2023, vBulletin Solutions Inc.