Complete with removeable armors and fully detailed inner frame. :naughty:

where can get garage kits for mg exia to turn into exia r2

Thanks for the suggestion i will try that out.. Any other suggestions would be great. :)

omg! what happened to his crotch & to the instructions, please stop pointing at it, we all know how it works :heh:

seriously?, including to the male pilots's crotch & even Piccolo's? :heh:

found the post i was refering to on page 720something

How much work would HG Gundam Dynames take to build? It's the suit I personally like most and would like to build it if possible, but I'm a complete beginner. Frankly I don't have much interest in Exia, and not a whole lot of time and money either. Is HCM Pro Dynames any good?

Which models are easiest to build and uses least additional supplies like paint or cutters? And decent quality?

Sorry for my endless questions and thanks in advance to anyone who answers them! :D

You don't have to build HCM Pro.

You have to paint/colour the HG Dynames to look exactly like in the show. The building can take atleast 7 hours (that's my shortest, and I'm more of a beginner)

Would it still look decent without painting? I just don't think I can get ahold of paint and have time to use it where I'm living right now.

If you're only going to build, put on stickers, and panel line, without paint at all, HG 00 is definitely a good start. I have over 10 HG 00 kits, all unpainted, built directly out of the box, minimal panel lining.

And I see you're 14. I'm 15. :) You should be able to afford most of the HG 00 kits if you're not painting them. But I recommend you to panel line at least, they'll look better.

HG Dynames is pretty easy. One of the first few kits I got, though it is not very show-accurate due to the lack of paint. 00S2 kits are more show-accurate in terms of building them without paint.

How is the designer's colour Seravee?

Is Cherudim the only one out of the three 1/100 (Designer color ver.) without the LED gimmick?

Thanks for the info. I think I'll give HG Dynames a shot. :D

Hmm, but looking at my HG Dynames, it's nothing compared to the painted version. You might want to have a look at the unpainted version before deciding.

The Manual from "http://www.1999.co.jp/eng/10097456" say the 1/100 Designer Color Cherudin kit includes the LED gimmick.

i have a question regarding protecting paint from the dust. i know where to find such clear paint but im not sure which is better to use between the dull finish or shiny finish? i dont want the model to shine like orb's akatsuki but i do want a semi metallic finish so it shines a bit while keeping the colours a bit dark.

using a clear or gloss topcoat will make ur kits more shinier as opposed to a flat or matt finish. it's kinda hard to achieve what you are describing as i'm not really proficient with painting myself. if you want a metallic finish you can buy either metallic gold or silver spraypaint from Tamiya. you'll need an undercoat of Black paint first before applying either of the above paints so that the finish is smooth

also if u use an metallic paint, u cant use any topcoat as it will ruin the finish.
hope this helps!!!:)

Guess the grade?

http://i203.photobucket.com/albums/a...21d95622d4.jpg
http://i203.photobucket.com/albums/a...20bd5640a2.jpg

Yep, PG 00 Raiser preview :eek::eek::eek:

Images from Ngeekhiong

who is goin for pg 00? damn costly!

Hey how come black paint for an undercoat for silver/metallic paints? I've never used those paints before, but always wanted to try it. Since I usually use white/gray primer before I paint, would there be much difference if I used black?

Tempting, but too expensive for my taste.

So it looks like this? Looks like a 'pass', phew. :heh:

thanks, that helps alot. i always wondered how they make it metallic. ive started my hg144 00 gundam, the chest and gn drives are done. once i get some pics of the GN sword 2 and the apporiate transparent blue paint.

No Worries X207, glad to help :D

Tamiya actually recommends spraying Black as an undercoat themselves, i believe the reason is so that the metallic silver (or gold) has a consistent finish on the painted piece. if no undercoat is used, the finish may look darker or lighter in some areas compared to the rest.

as with using primers, i havent used them before so i couldnt tell u if they would make any difference, i painted my MG Hi-nu a few months ago using metallic silver, if u look at the silver spots, u can see that the paint is consistent and even as i applied a black spray beforehand

http://img32.imageshack.us/img32/3685/dsc00286a.th.jpg

wow :twitch:


http://i36.tinypic.com/72fwgz.jpg


http://i38.tinypic.com/1zg6d7b.jpg


http://i38.tinypic.com/24oavr4.jpg


frankly speaking it looks great. now if somehow I could do something about the shipping fee and get the price cut ..... :upset:

Are those real GN Particles!!!????I never knew they exist.Wow,I guess we're paying for that huh?

:(............................that 00 is beautiful.But such luxuries can only be afforded by Kings and Queens.At least Emperor/Empresses get discounts.

I think my HG 00 just became One Year Old recently.I better buy him a cake,because I'm not getting the PG anytime soon.

I knew Bandai would take advantage of this.I'm looking forward to the manual more than the kit for any 2 Drive mention.

I always liked the color scheme more than the Susanowo,so maybe I'll give it a shot.






Question:Alright,the 00 Gundam's GN Sword II equipment has a blue crystal sensor on it right?

Well,anybody got any suggestions on what color should be used for the Trans-Am version?because there's no color guide and I have no ideas on this.

Err, those GN-Particles were likely added to the picture via photoshop, Sonic.

By the way,is that the GN-Sword III being attached to 0 Raiser?

Huh,reminds me a bit of XN Raiser......


I know its early,but I haven't seen any good poses from this PG yet,which makes me worried a bit considering how........unfortunate the 1/100 was.A shame,considering the HG was pretty great.I hope it wont dissapoint.

Still,I will be enjoying the pictures of these,that is for sure.

Looks like its attached there. I like the idea of how the 0-Raiser has equippable weapon pods... those could really up the combat capability of the 00 Raiser.

I'm going to Japan this year. Definitely picking up a couple of PG 00 with the exclusive parts. :)

Wow.........a couple?That's really alot.

Good luck building them.PGs are really hard and stressful,I'm just getting annoyed by HGs these days,now that my schedule is tighter.

Well, its been quite some time since i've bought my first airbrush and compressor and i've finally got the time to test it out. I had an Exia lying around so might as well tried experimenting on that. This is indeed the first kit i've tried fixing the seam lines, sand, primer, paint and so on. It was a real enjoyable experience for me and i've managed to learn a few things *not to mention some heartbreaking mistakes like paint chipping, fingerprints on paint, etc...*Well, here are the pics!

http://img96.imageshack.us/img96/392...2009406.th.jpg
http://img96.imageshack.us/img96/178...2009398.th.jpg
http://img203.imageshack.us/img203/2...2009400.th.jpg
Album link- http://img96.imageshack.us/gal.php?g=05102009406.jpg

Well, thats it! Comments and advice of improvements appreciated!

is it hg 1/144 exia or 1/100?

That. Is. Amazing. O_O

Awesome art.

I wonder what the box art would be like. XD

damn Bandai!!!!! the 00 raiser could be my first PG...

maybe they'll include those clear plastic pieces with green dots like in the nu gundam =X

Nice, though keep in mind that these are CGI images and not the actual physical models. Though I like how the GN Sword III attaches to the O Raiser.

PG 00 Raiser is too cool

The official development blog :-

http://bandai-hobby.net/hobbyblog/pg_00raiser/

Love how they commented how the kit is to the PG Red Frame :-

> アストレイに負けず劣らずの重量級の本商品。

So it will only be a slight improvement, huh ?

Man, PG 00 Raiser is all kind of awesomeness.

I can't afford the price. Too bad

Look on the bright side, the developers said "it will be as good as the Astray" and look at how the PG Astray Red Frame turns out.

This is really tempting but I don't know what to do about the price :(