AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Chiu_fan 2012-11-04 02:46

Quote:

Originally Posted by Skye629 (Post 4424945)
Anyone know a good tool with a sharp/fine tip that helps scrape away paint/gundam marker that is not sharp enough to damage plastic and maintain its point?

(trying to clean excess on Sleeve parts ;_;)

Try using a simple toothpick with a little thinner. That's what I do when cleaning up those kinds of cases.

Skye629 2012-11-04 03:16

Quote:

Originally Posted by Chiu_fan (Post 4425099)
Try using a simple toothpick with a little thinner. That's what I do when cleaning up those kinds of cases.

Thats what I am currently doing, however the points always end up blunting after about 3-5 uses >_<

Thats y I am trying to see if I can find some sort of metal or plastic replacement that will last

bio9205 2012-11-04 04:41

Toothpicks work great for me too. My guess is that metal or plastic is more likely to scratch the plastic.

suiton629 2012-11-04 09:17

Quote:

Originally Posted by bio9205 (Post 4424807)
As much as I'd like to see some GSD suits get the RG treatment, they're unlikely to happen unless we see a GSD remaster, probably next year. A safer bet is, say, Providence?

Ah, those annoying Sleeves markings. :heh: I use a white paint marker to add details on some of my kits, and I'm planning to do the same for the Rozen Zulu. I use a few layers so I don't use silver as a base, but I guess I'm an amateur painter.

I guess that's true. But we do have all of Kira's suits in RG minus the Strike Freedom which I think is kind of a given considering how popular it is. Then we have the RG Justice that just came out with the MG Aegis. So maybe we will see a RG Aegis, then later an RG Infinite Justice?

Then I think if we get a Seed Destiny Remaster (which I don't see why they wouldn't since it'd give Bandai an excuse to release the episodes on overpriced BluRay which people will buy in Japan..lol), we will see Shinn's suits in RG..

Or am I being too crazy? :confused: :rolleyes: :eyespin: :D

maknaedik 2012-11-04 09:27

Quote:

Originally Posted by suiton629 (Post 4425382)
I guess that's true. But we do have all of Kira's suits in RG minus the Strike Freedom which I think is kind of a given considering how popular it is. Then we have the RG Justice that just came out with the MG Aegis. So maybe we will see a RG Aegis, then later an RG Infinite Justice?

Then I think if we get a Seed Destiny Remaster (which I don't see why they wouldn't since it'd give Bandai an excuse to release the episodes on overpriced BluRay which people will buy in Japan..lol), we will see Shinn's suits in RG..

Or am I being too crazy? :confused: :rolleyes: :eyespin: :D

RG Impulse? How much of a nightmare will it be then? If they pull of the RG Zeta well, then I think it's is possible for them to do so.

suiton629 2012-11-04 09:29

Quote:

Originally Posted by maknaedik (Post 4425393)
RG Impulse? How much of a nightmare will it be then? If they pull of the RG Zeta well, then I think it's is possible for them to do so.

Maybe they can make it a parts-former?

LoweGear 2012-11-04 09:31

Quote:

Originally Posted by maknaedik (Post 4425393)
RG Impulse? How much of a nightmare will it be then? If they pull of the RG Zeta well, then I think it's is possible for them to do so.

If they can make the RG Zeta, then an RG Impulse is a piece of cake in comparison. The Core Fighter system has been implemented on smaller scales before with other Gundam designs, and the Impulse itself doesn't have a particularly difficult transformation.

maknaedik 2012-11-04 09:43

Quote:

Originally Posted by LoweGear (Post 4425401)
If they can make the RG Zeta, then an RG Impulse is a piece of cake in comparison. The Core Fighter system has been implemented on smaller scales before with other Gundam designs, and the Impulse itself doesn't have a particularly difficult transformation.

Why haven't I thought of that? Thanks for the info. My only worry now is the core fighter. It has small pieces in MG and if they really are going stickerless here, then I that will be an interesting sight to see.

Chiu_fan 2012-11-04 09:50

Quote:

Originally Posted by Skye629 (Post 4425125)
Thats what I am currently doing, however the points always end up blunting after about 3-5 uses >_<

Thats y I am trying to see if I can find some sort of metal or plastic replacement that will last

Simple solution: get a hobby knife and re-sharpen the toothpick.

suiton629 2012-11-04 10:00

Quote:

Originally Posted by maknaedik (Post 4425407)
Why haven't I thought of that? Thanks for the info. My only worry now is the core fighter. It has small pieces in MG and if they really are going stickerless here, then I that will be an interesting sight to see.

We could get 2..?

1 as a core block and 1 as the actual plane.

Skye629 2012-11-04 15:43

Quote:

Originally Posted by Chiu_fan (Post 4425412)
Simple solution: get a hobby knife and re-sharpen the toothpick.

Mind blown I never thought of that xD Thanks!

bio9205 2012-11-05 01:04

RG Aegis won't happen. RG Justice was easy because they reused Freedom's frame, Aegis is more complex (easier than Zeta, granted) plus it's less popular. Really interesting to see where Bandai goes with the RG line from here.

maknaedik 2012-11-05 01:16

Quote:

Originally Posted by bio9205 (Post 4426382)
RG Aegis won't happen. RG Justice was easy because they reused Freedom's frame, Aegis is more complex (easier than Zeta, granted) plus it's less popular. Really interesting to see where Bandai goes with the RG line from here.

I'd say Providence is next :)

Skye629 2012-11-05 01:56

I want some RG's from the Gundam Project (0083)

RG GP-01, 02, 03, and 04/Gerbera Tetra would be sick

StrikeFreedomV2 2012-11-05 02:34

Quote:

Originally Posted by Skye629 (Post 4426419)
I want some RG's from the Gundam Project (0083)

RG GP-01, 02, 03, and 04/Gerbera Tetra would be sick

You have good taste, sir :D

maknaedik 2012-11-05 02:58

Quote:

Originally Posted by StrikeFreedomV2 (Post 4426461)
You have good taste, sir :D

Those, I think, have high chances of getting RG treatment.

LoweGear 2012-11-05 05:03

Quote:

Originally Posted by suiton629 (Post 4425423)
We could get 2..?

1 as a core block and 1 as the actual plane.

A fully transformable core fighter is perfectly doable with the RG series. Look at the RG RX-78-2 Gundam: it has a more complex Core Block system, yet it managed to do so on that scale perfectly without parts swapping, and the Impulse's Core Splendor has a much simpler system. That said, the RG RX-78-2 does include a separate non-transforming Core Block so you can display the Core Fighter separately from the Gundam.

suiton629 2012-11-05 11:41

Um.. Is the RG Strike Rogue and RG Strike (Deactivated Mode) worth the money?

RX93-2 2012-11-05 15:49

They have some flaws so I'd wait for a 2.0 if I where you.

suiton629 2012-11-05 17:58

Quote:

Originally Posted by RX93-2 (Post 4427047)
They have some flaws so I'd wait for a 2.0 if I where you.

RG kits get 2.0...?


All times are GMT -5. The time now is 18:09.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.