AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

DarkWarrior 2007-01-18 14:09

The redesigned Hi-Nu is a result of Bandai putting Izubuchi in charge for this model kit, instead of Katoki. I don't think a significant redesign like this will happen again (at least I hope).

And damn, that Amuro stand looks nice. But for some reason, I doubt it'll make it into the final product.. like SF's spider stand.

Derringer 2007-01-18 14:42

Quote:

Originally Posted by DarkWarrior (Post 804667)
The redesigned Hi-Nu is a result of Bandai putting Izubuchi in charge for this model kit, instead of Katoki. I don't think a significant redesign like this will happen again (at least I hope).

And damn, that Amuro stand looks nice. But for some reason, I doubt it'll make it into the final product.. like SF's spider stand.

But Izubuchi's the one who designed the Hi-Nu in the first place. It's just he's redesigning his own work. Katoki hasn't touched a MG design for a while now. All of them with in the past few years, with the exception of the Crossbones have been done by the BEECRAFT studio.

DarkWarrior 2007-01-18 14:55

That's pretty interesting. I thought BEE-CRAFT worked on Seed MGs, not the entire MG line. And I recall Gunota saying that Izubuchi instead of Katoki was in charge of the Hi-Nu, so I thought he had a hand in the MG team.

To be honest, I'm not sure who to believe anymore. For example, someone said in another forum that BEE-CRAFT was a nickname for Junichi Akutsu, which I find odd because I thought it was the name of a team. Bah.

Derringer 2007-01-18 15:13

Quote:

Originally Posted by DarkWarrior (Post 804703)
That's pretty interesting. I thought BEE-CRAFT worked on Seed MGs, not the entire MG line. And I recall Gunota saying that Izubuchi instead of Katoki was in charge of the Hi-Nu, so I thought he had a hand in the MG team.

To be honest, I'm not sure who to believe anymore. For example, someone said in another forum that BEE-CRAFT was a nickname for Junichi Akutsu, which I find odd because I thought it was the name of a team. Bah.

BEECRAFT, a team has done a number of MG kits including the GM, the most of the G Gundams, the OYW Gundam, the Zeta and Mark II 2.0, the F91, all the SEED MGs, etc. They also did the later SEED Destiny 1/100 releases.

Junichi Akutsu is the person responsible for the original GAT X concept designs as well as the Astrays and Stargazer designs. He is part of BEECRAFT.

kct 2007-01-18 16:14

Of course...Sunrise are whoring him too these days (including him in non-mecha animes like HiME and such).

Derringer 2007-01-18 18:55

The Anime News Network description is slightly misleading, especially since a lot of the BEECRAFT are NOT based off Katoki's work. Case in point, the CR Freedom looks nothing like the MG Freedom.

DarkWarrior 2007-01-18 19:10

Quote:

Originally Posted by Derringer (Post 804719)
BEECRAFT, a team has done a number of MG kits including the GM, the most of the G Gundams, the OYW Gundam, the Zeta and Mark II 2.0, the F91, all the SEED MGs, etc. They also did the later SEED Destiny 1/100 releases.

Junichi Akutsu is the person responsible for the original GAT X concept designs as well as the Astrays and Stargazer designs. He is part of BEECRAFT.

Thanks for clearing that up. It looks like BEE-CRAFT has been around for awhile if they were responsible for the GM.

Edit: Dalong has posted runner shots and manual scans of Crossbone Full Cloth, more than a week before its release date. I swear, he has some special connections..

SNT1 2007-01-19 01:00

^wow.

It only happened twice AFAIK, the other kit he had before release: Crossbone Ver Ka :dots: :bash:

Eh, Im getting this mofo. Who cares if I still have (2) unsnapped Ver-Kas. maybe EBay one of those fools.

wavehawk 2007-01-19 01:07

Quote:

Originally Posted by SNT1 (Post 805255)
Eh, Im getting this mofo. Who cares if I still have (2) unsnapped Ver-Kas.

- First, you could use the "Skull" parts from the Ver Ka to put on the Full Cloth--I think the Cartoony skulls don't look good on the Crossbone as an MG. On the other hand, you could build the inner skeleton and use it as an inner frame for some other stuff you might build.

DarkWarrior 2007-01-19 01:19

Actually, from what I can tell from the pictures, Full Cloth includes the Ver. Ka runners + the Full Cloth stuff. So the Ver. Ka Skull parts are also there. It looks like the only thing it's missing is the beam cloak and some decals.

SNT1 2007-01-19 01:27

Quote:

Originally Posted by wavehawk (Post 805264)
- First, you could use the "Skull" parts from the Ver Ka to put on the Full Cloth--I think the Cartoony skulls don't look good on the Crossbone as an MG. On the other hand, you could build the inner skeleton and use it as an inner frame for some other stuff you might build.

I had that in mind, although I just want to drop the skull motif altogether, and maybe attempt a "Gundam F97" instead of "Crossbone Gundam"

Deus EpS Machina 2007-01-19 03:46

im not sure what significant parts from the Ver Ka got carried over...but looking at the Full Cloth's manual...lots of large parts arnt needed in its assembly.

X marks the spot folks:
http://dalong.net/review/mg/m98/manual/m98_mb0004.JPG

Also...Thats the way i plan to paint my SF. comments? better idea? In fact, here, Any help would be great. BTW, thats also the same scheme i have for my MG Freedom.

Meehlimo 2007-01-19 07:25

That SF looks really good. U did the same think i did with cover up the gold plated thrusters in the legs and chest vents with black IMO it looks better that way.

kuraishi 2007-01-19 10:32

How do u bend those clear pipes that hold the dragoon effects and i was wondering do hlj sell those action stands??? want a stand for my Xbone.

kct 2007-01-19 11:38

Hot water is your friend for the DRAGOON effect holder.

OK, a GunPla shop near my house (to be precise, 10 minutes away on foot) has just dropped the gauntlet for the normal version of the MG Strike Freedom in terms of 'lowest price' <.< .

Derringer 2007-01-19 18:09

What special connections. Whenever Gundam Base posts pictures, it means the kit's been released already. Errr Korea specifically.

http://www.gundambase.com/gshop/good...?goodsIdx=2035

lycantivis 2007-01-19 19:13

I would really like to see a Deepstriker from Gundam Sentinel. You know with those prototype colors it stands out amungst the rest of the sentinel line. Though I doubt it will ever get a MG due to its size.

kct 2007-01-19 21:22

That doesn't stop people from making conversion/resin kits to create the Deep Striker.

dodgethis_sg 2007-01-19 22:22

http://www.hobbyfan.com/product_info...oducts_id=4834


And in other news.


The light sand is H313 mixed with white to lighten the original colour. The light brown is H19 out of the bottle. Panel lined with raw umber. Did not pre-shade or do weathering due to lack of time.

Went lazy with the head seam and got away with it by panel lining it. Lost two parts.

The machine gun was screwed up thanks to H78 Metal Black. The silver powder was very obvious and too bright. Darkened the weapon with lots of smoke.

But I have to say, for 19 bucks, this is one great kit OOB. The shield detailing and soles are on par with MG kits. And the elbows... Full articulation! The seam lines are quite okay, the problematic ones are hidden away or concealed by construction. Who needs the MG GM and conversion kit which together would cost four times as much as this bargain?

http://i61.photobucket.com/albums/h5...M/P1200297.jpg

http://i61.photobucket.com/albums/h5...M/P1200299.jpg

http://i61.photobucket.com/albums/h5...M/P1200300.jpg

http://i61.photobucket.com/albums/h5...M/P1200301.jpg

http://i61.photobucket.com/albums/h5...M/P1200302.jpg

http://i61.photobucket.com/albums/h5...M/P1200303.jpg

I just realised after taking the pictures I forgot to paint the pipings at the knee area.

WaytoDawn 2007-01-20 03:49

Ok, after going to my local tamiya shop, they said they don't sell Titanium Gold in spray paint form. It was not manufactured that way. only in bottles. Is this true? So i guess i have to use gold leaf then.....


All times are GMT -5. The time now is 21:32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.