Quote:
|
Hi guys. I've just bought a MG Hyaku Shiki HD limited ed. (well, that's what they say, I honestly don't think it's that limited to begin with, since BANDAI = $), and since it's my first MG, I'm clueless about decals. I've seen websites with tutorials about dry decals, water ones and so on, but I really don't want to screw up and of course, the manual doesn't help me on this.
http://www.1999.co.jp/itbig08/10082757.jpg Since this MG brought a lot of decals of what I would assume are from different kinds, could anyone point me how to apply them according to these pictures?: http://www.dalong.net/review/mg/m37s...s_runner19.jpg http://www.dalong.net/review/mg/m37s...s_runner20.jpg http://www.dalong.net/review/mg/m37s...s_runner21.jpg i.e: The decals in the green sheet are water-based, so you apply them by etc etc etc. If you like to provide some additional links or personal experiences applying them, I'm open to learning about them. If for some reason the images aren't showing, these are the direct links: http://www.dalong.net/review/mg/m37s...s_runner19.jpg http://www.dalong.net/review/mg/m37s...s_runner20.jpg http://www.dalong.net/review/mg/m37s...s_runner21.jpg |
guys!! is there markers which i can use two paint the clear red part on the 00??
|
@nerroth.. are the claws just one piece? or can you unhook them or something? like in these pics.
http://www.geocities.jp/hobby_no_toriko/hg-garazzo.html |
Quote:
|
Quote:
|
hrm.. icic. so i guess that guy probably sliced the claws apart? looks pretty cool that way. =)
|
Quote:
Quote:
|
Quote:
|
Quote:
|
Quote:
|
Fine, whatever! Modded! Man, you people are picky.
|
Quote:
http://kusakusa.wordpress.com/2008/0...-apply-decals/ That's site pretty much has all you need to know on how to apply them. I've only just started using dry transfer decals myself, so I'm not too experienced with them, but they're easy enough to apply with a little patience. Basically, the dry transfer decals are the decals that have a piece of parchment/wax paper behind them, and for many of my kits, will come off on your hands if you're not careful! So, carefully trim out the decal you need, and put the decal down on the piece, and cover it tightly with a piece of scotch tape. The rough side of the decal should be on the piece, just so you know. After the tape is tightly attached, take a toothpick, DS stylus, paintbrush, anything with a point to it, and rub over every single molecule of the decal's area over and over and over. Seriously, do it constantly for about two minutes, at least. And when you think you've done it enough, do it some more! If you rubbed it on well enough, you can gently remove the tape, and the decal should be left on the surface. Pull the tape off extremely slowly, so if any of the decal didn't stick, you can set it back onto the piece without screwing up it's placement. If all is done right, the decal should be stuck on perfectly. Thankfully for me, Bandai was generous enough to include two versions of the same symbols, because I screwed up at least three times with applying. Here are some pictures of my F91 with it's decals... Spoiler:
I need to get another MG so I can practice more, myself. Has anyone bought the MG Nemo? I wouldn't mind knowing if it's a good kit or not... |
I haven been busy lately and this is the progress of my MG Strike E.
http://i491.photobucket.com/albums/r...s/Image292.jpg http://i491.photobucket.com/albums/r...s/Image384.jpg http://i491.photobucket.com/albums/r...s/Image387.jpg HG Kyrios that I hand-painted a bit. http://i491.photobucket.com/albums/r...Image075-1.jpg And these are the HGs I haven't work on... http://i491.photobucket.com/albums/r...s/Image378.jpg |
Hey guys, Hobby Search now has both Crossbone R1 and R2 RDs out for reservation. I'm contemplating getting Masurao and either one of the Xs. Any suggestions?
Apparently they will have similar arnaments. The X2 is however at 3610 yen while the X1 is at 2850 yen though, so I'm not too sure. |
Quote:
First, thank you for your useful answer, I'll check that site out and see what I can learn from it. On another subject, your F91 looks REALLLY good. I always wanted to get it, but I dunno if it has good articulation or maybe it's too small for a MG and I should get and additional action base for it (and I'm currently tight on my budget). Besides, I'd have to get Zeta 2.0 and RX-78-2 2.0 before F91, since I liked the movie and LOVED that gundam but not as much as the previous series mentioned. Now, to the important matter: I still want to make sure that I got things right, so I uploaded the images on another server so anyone can tell me (if they are in the mood) which decals are which (i.e: the blue one with the silver letters is dry or water? the blue one in the upper left is water-based, etc)...sorry for the inconvenience but I have doubts and don't wanna screw up. http://g.imagehost.org/0976/a1jpg.jpg http://f.imagehost.org/0092/a2.jpg http://g.imagehost.org/0425/a3.jpg |
Quote:
|
Quote:
so they are mainly water-based, as I thought? Then I'm in trouble, since I believe they are the most difficult to apply. Btw, the green sheet seems like stickers to me, but when I tried to remove them, they wouldn't come off easily as say the eyes or the green stuff in the helmet that belongs to the silver sticker sheet. |
Still no MG Sword Impulse boxart?
I'm so tempted to order something next week. Shall I go for the MG RX-78-2 OYW Limited Edtion G-3 colors? I found a deal for like $62(yeah..so much for a deal). I don't know if it's worth it.http://usih.merchantrunglobal.com/Im...isplaySize=400 |
Quote:
|
All times are GMT -5. The time now is 05:14. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.