AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

astranagun 2009-04-27 16:56

Quote:

Originally Posted by Sir Dearka (Post 2363425)
Sadly, it is just the reflection of light. Still, the kit is awesome. Here's another pic for you:

http://img.photobucket.com/albums/v2...l/DSCF7400.jpg
....

Sorry but what is the thing on the left side side of the I.J.? Another beam saber?

I see.Thanks

For those interested here's something:
HG Trans-am Raiser gloss injection version review

Rising Dragon 2009-04-27 17:06

Quote:

Originally Posted by astranagun (Post 2365535)
Sorry but what is the thing on the left side side of the I.J.? Another beam saber?

For those interested here's something interesting:
HG Trans-am Raiser gloss injection version review

I think that's its beam boomerang, the one from the shield.

Sir Dearka 2009-04-27 18:00

Quote:

Originally Posted by astranagun (Post 2365535)
Sorry but what is the thing on the left side side of the I.J.? Another beam saber?

Yeah. Part of the shield can be detached to act as a sword. The boomerang can be straightened to look like a beam sword. One can see it clearer here:
http://www.toyking.com.tw/image/toy/.../156649htm.jpg

Karidzka 2009-04-27 19:53

Quote:

Originally Posted by Amber.Dawn (Post 2365016)
Seeing that Strike reminded me of the Unicorn's Destroy Mode.

lol

and i make that about 2 years ago :D

Sworra 2009-04-27 21:19

Quote:

Originally Posted by Sir Dearka (Post 2365463)
yeah, taking it slow is the best way. I learnt it the painful way as my rush ruined my MG Strike Noir. I think I'll never forgive myself :'[

heh, it's been just two years now but I still feel as if I just picked the hobby yesterday. It all started from the SEED five :D

http://img.photobucket.com/albums/v2...l/DSCF7399.jpg

You can always go back and finish where you left off, think of it as a restoration project it might take a bit of time and patients but at least you will have it the way you want it.. Go from scratch take each part strip it if it has paint, sand it down, putty it etc, etc. I'd give it an attempt, what is there to lose if it's already wrecked. There is always room for improvement.

SEED five was cool i liked how they did that, which reminded me how i got into Gundams.. Gundam Wing is how i got hooked. :)

jackyng222 2009-04-27 23:08

I have a question. if you use gundam markers on the extra finish on the freedom or strike freedom, can you use an eraser method and wipe off the excess or is it permanent like for akatsuki gundam ?

Kasagi Yabu 2009-04-27 23:15

Hey everyone I'm new to these forums and I've been looking at some of the models people have done here and I am very impressed. I've never been very good at putting together models, but I've always wanted to buy all these amazing master grade models. Seeing as I'm not very good what do you all think would be a good model for me to start on? I deffintly want it to be master grade...Assuming that's the best kind I don't really know much about all these terms. :upset:

Kelrys 2009-04-27 23:26

MG Strike Noir should keep u started.

Amber.Dawn 2009-04-27 23:43

Hmmm...
Strike and variants<--pretty easy
Rx-78<---pretty easy
rant: me want Akatsuki MG.../cry/

I would go for the Strike or its variants. MG's aren't that hard, unless you have butter fingers.

SD: Super Deformed<--a couple of runners
FG: First Grade<--don't have any, but slightly harder than SD I think
SG: painted, really quick builds, 15 minutes-ish
HG: High Grade<--nice, quick build...great for practicing, painting, detailing, little bigger than SD
NG: No Grade<---like HG
1/60 real detail: a PG sized HG I guess
MG: Master Grade<--harder, can be around 12 (-ish?) runners, smaller parts, takes a while, about 1.5ish times the size of HG
PG: Perfect Grade<--more detailed, around 1.8 times the size of MG
GG: Glorious Grade<--wires for lighting....wires everywhere

I think that's it....going in order from simplest to the most complex, although HG and NG are basically the same, as with PG and GG.

try:
http://ngeekhiong.blogspot.com/
http://www.dalong.net/

LintangHaseo 2009-04-28 01:21

just having fun with my Archer...

http://i43.tinypic.com/qn0bch.jpg

pretty standart isn't it... :heh:

Exia_00 2009-04-28 02:27

trans am raiser has been released rite?

JayCee 2009-04-28 02:36

Quote:

Originally Posted by jackyng222 (Post 2365970)
I have a question. if you use gundam markers on the extra finish on the freedom or strike freedom, can you use an eraser method and wipe off the excess or is it permanent like for akatsuki gundam ?

If you're relativey quick you can erase the markers. But they tend to leave some sort of smudge or residue behind anyhow. I usually avoid using them and just use paint instead. However because of the finish it should be extra runny compare to usual so gives you a little more time to wipe off in case of accidents.

Quote:

Originally Posted by Kasagi Yabu (Post 2365975)
Hey everyone I'm new to these forums and I've been looking at some of the models people have done here and I am very impressed. I've never been very good at putting together models, but I've always wanted to buy all these amazing master grade models. Seeing as I'm not very good what do you all think would be a good model for me to start on? I deffintly want it to be master grade...Assuming that's the best kind I don't really know much about all these terms. :upset:

If you really are a beginner. You should really start at High grade model rather than MG even though most people would say MG isn't hard. Yes putting together a gundam even at perfect grade isn't hard if you're just snap fitting everything. Doing it properly requires some skill. Erasing seam lines, sanding, cementing pieces together, puttying, prime & paint, panel lines, coating etc. Stuff like that is best on practising on a more affordable basis like the HG models until you get you're skills up to scratch. I may sound longwinded but there is no easy way to climb up a progress ladder in anything so it obviously applies to gunplay too. You can't just take a ladder and expect to be at the top without putting effort into climbing it. Start off right and you won't have to go back and relearn things from scratch again at a later date.

Once you're confident on at least say working with panel lining, sanding and coating as bare minimum then I would think about MG grades. Unless of course you have a lot of mulah to spend on Gunplay and doing mind messing a few in the progress of learning your skills.

Though if you must start off with MG. Try any of the original RX-78 series. The frame and general bulk and less sophistication makes it less of a work when it comes to removing seam lines and panel lining.

That's my 2 cents anyway

LoweGear 2009-04-28 02:40

Quote:

Originally Posted by Exia_00 (Post 2366178)
trans am raiser has been released rite?

Yes, the HG Trans-Am Raiser has been released.

Karidzka 2009-04-28 05:14

Quote:

Originally Posted by Kasagi Yabu (Post 2365975)
Hey everyone I'm new to these forums and I've been looking at some of the models people have done here and I am very impressed. I've never been very good at putting together models, but I've always wanted to buy all these amazing master grade models. Seeing as I'm not very good what do you all think would be a good model for me to start on? I deffintly want it to be master grade...Assuming that's the best kind I don't really know much about all these terms. :upset:

why don't you start with HGUC Acguy

it's a nice kit, easy to build ,have a small amout of seamline and it's cute

well for MG , i quess UC series [ver 2 ] is a good idea

Sworra 2009-04-28 05:14

Quote:

Originally Posted by JayCee (Post 2366188)
If you really are a beginner. You should really start at High grade model rather than MG even though most people would say MG isn't hard. Yes putting together a gundam even at perfect grade isn't hard if you're just snap fitting everything. Doing it properly requires some skill. Erasing seam lines, sanding, cementing pieces together, puttying, prime & paint, panel lines, coating etc. Stuff like that is best on practising on a more affordable basis like the HG models until you get you're skills up to scratch. I may sound longwinded but there is no easy way to climb up a progress ladder in anything so it obviously applies to gunplay too. You can't just take a ladder and expect to be at the top without putting effort into climbing it. Start off right and you won't have to go back and relearn things from scratch again at a later date.

Once you're confident on at least say working with panel lining, sanding and coating as bare minimum then I would think about MG grades. Unless of course you have a lot of mulah to spend on Gunplay and doing mind messing a few in the progress of learning your skills.

Though if you must start off with MG. Try any of the original RX-78 series. The frame and general bulk and less sophistication makes it less of a work when it comes to removing seam lines and panel lining.

That's my 2 cents anyway

Agreed with JayCee. Starting off with a HG (High Grade) will teach you what is to come in a Master Grade. Of course MG's will have a few surprises in them and when you get to those surprises those HG's will pay off from what you learned. And as JayCee said "Its cheaper" as well if you do make a mistake and decide to throw the kit against a wall.. or burn it, lol not from personal experience on last sentence. hehe. But all up to you Kasagi Yabu.

Vandalier 2009-04-28 05:51

i think it's true

a lot of people want to try MG as they first project
well i cannot blame them because maybe they like the kit itself
so they don't think about mastering the skill
but i really recommend HG for beginnner

forget SD, because you need to erase a lot of seamline
and masking it everywhere

Kelrys 2009-04-28 06:03

My first model was non-graded 1/144 Duel Gundam. Tried everything with it, lousy painting, panel lines, and kit-bash. After another 3 non-graded kits, I moved on to HG 1/144. And up to recently I get my first MG (Strike E).

Kasagi Yabu 2009-04-28 07:18

hmm..ok thanks everyone! I think I'm going to start off with an HG like everyone is suggesting. I love the strike so I think I may start with that. Accguy is simple I'm sure but I never liked that suit to be honest.

Vandalier 2009-04-28 08:09

done with the shaft
the only thing left is the blade of the axe
http://i406.photobucket.com/albums/p...685_resize.jpg
http://i406.photobucket.com/albums/p...686_resize.jpg
http://i406.photobucket.com/albums/p...687_resize.jpg
http://i406.photobucket.com/albums/p...688_resize.jpg


ok i need your help guys
plz pick one of these three design
http://i406.photobucket.com/albums/p...689_resize.jpg
http://i406.photobucket.com/albums/p...690_resize.jpg
http://i406.photobucket.com/albums/p...691_resize.jpg
or you can also give me your design

astranagun 2009-04-28 08:16

Quote:

Originally Posted by Vandalier (Post 2366607)

http://i406.photobucket.com/albums/p...691_resize.jpg
or you can also give me your design

I'll suggest this one.


All times are GMT -5. The time now is 04:00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.