AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

maknaedik 2013-04-07 09:13

My recent hauls:

Spoiler for Hauls:


Oh, more expensive (cause it's an issue for one, LOL)

Obelisk ze Tormentor 2013-04-07 09:32

I'd like to see some photos of that Trans-am GN-X IV. And do the best poses you can with it. :D

Zeydra 2013-04-07 11:20

Is it strange that the more I see of the new Strike mg the more I dislike it? Its head is just really bugging me for some reason. I've honestly no idea why though, and I'm still going to get it. :heh:

Obelisk ze Tormentor 2013-04-07 12:03

Quote:

Originally Posted by Zeydra (Post 4624959)
Is it strange that the more I see of the new Strike mg the more I dislike it? Its head is just really bugging me for some reason. I've honestly no idea why though, and I'm still going to get it. :heh:

I’d say the head is actually an improvement over the older one. The old head is quite ugly. The eyes are not quite well-placed and the v-fin is to straight-forward imo. Still, I do have a problem with the HD Strike and that is the Aile wings which become less smooth than the older ones due to some additional flaps they applied on them. That’s too bad really. I know they wanted to make it more “real” that way, but the previous smooth-wings are better-looking imo.

maknaedik 2013-04-07 18:29

Quote:

Originally Posted by Obelisk ze Tormentor (Post 4624829)
I'd like to see some photos of that Trans-am GN-X IV. And do the best poses you can with it. :D

I really want to do that, but I'm still searching for a tamashii stage. Damn, it can do good poses, I just lack a stand.

Butagami 2013-04-08 06:33

Oh joy, oh laughter, oh mirth!
I finally managed to get all the blade bits off my Qan[T]
I ended up using a small metal file to file away at the piece that held the bits. After some time I finally got it loose. One of the connectors does have a small crack in it, over which I poured some superglue. Here's to hoping it holds up...

@Maknaedik: Awesome. Do post pictures when you're done. One day, I'll get a red frame too....

suiton629 2013-04-08 07:47

Quote:

Originally Posted by Butagami (Post 4626361)
Oh joy, oh laughter, oh mirth!
I finally managed to get all the blade bits off my Qan[T]
I ended up using a small metal file to file away at the piece that held the bits. After some time I finally got it loose. One of the connectors does have a small crack in it, over which I poured some superglue. Here's to hoping it holds up...

@Maknaedik: Awesome. Do post pictures when you're done. One day, I'll get a red frame too....

That's something I'm concerned about. But I have 2 MG 00 Qan[t] so I should be ok. I got 2 because I wanted to display one in like "standby" mode and another in Quantum Burst Mode.

maknaedik 2013-04-08 08:05

Quote:

Originally Posted by Butagami (Post 4626361)
Oh joy, oh laughter, oh mirth!
I finally managed to get all the blade bits off my Qan[T]
I ended up using a small metal file to file away at the piece that held the bits. After some time I finally got it loose. One of the connectors does have a small crack in it, over which I poured some superglue. Here's to hoping it holds up...

@Maknaedik: Awesome. Do post pictures when you're done. One day, I'll get a red frame too....

Wish granted even before you wished for it. As usual and I'm excited but I still have some free commish works to finish, haha..

StrikeFreedomV2 2013-04-08 10:20

I just had a thought about the upcoming RG GP01-kits: The GP01 has a pretty big Core Fighter that makes a big chunk of its upper body. I don't know if I would like them to integrate the transformed Core Fighter into the chest. Poseability might suffer from this, and the torso could be more fragile. What do you guys think about this. I would like to have just a Core Fighter that can transform and just the Gundam by itself without the need of a coreblock

Providenceangle 2013-04-08 13:02

Quote:

Originally Posted by StrikeFreedomV2 (Post 4626650)
I just had a thought about the upcoming RG GP01-kits: The GP01 has a pretty big Core Fighter that makes a big chunk of its upper body. I don't know if I would like them to integrate the transformed Core Fighter into the chest. Poseability might suffer from this, and the torso could be more fragile. What do you guys think about this. I would like to have just a Core Fighter that can transform and just the Gundam by itself without the need of a coreblock

They can just do what they did for the RX 78, make a piece and a separate core fighter.

StrikeFreedomV2 2013-04-08 14:33

Quote:

Originally Posted by Providenceangle (Post 4626836)
They can just do what they did for the RX 78, make a piece and a separate core fighter.

The Coreblock is very big and makes a big part of the torso of the GP01. But as someome on Facebook said: They pulled of the Zeta. So they will probably pull that off as well^^

Washu-Chan 2013-04-09 06:04

Question: What were the GSD Gunpla sales like during its original broadcast? Based on rumors, they didn't sell well compared to the Seed Gunpla, with the exception of the Strike Freedom.

And given that Bandai's view is that the show is a "failure" (regardless of their performance and reception) if the show's Gunpla sell below expectations...

firefox 2013-04-09 06:51

Quote:

Originally Posted by Washu-Chan (Post 4628019)
Question: What were the GSD Gunpla sales like during its original broadcast? Based on rumors, they didn't sell well compared to the Seed Gunpla, with the exception of the Strike Freedom.

And given that Bandai's view is that the show is a "failure" (regardless of their performance and reception) if the show's Gunpla sell below expectations...

How sales did in japan (the only place that matters for bandai) is not always visible for us non japanese persons.
From what i've seen then, it sold quite well, first wave of all 1/144 hg and 1/100 hg were always sold out in a couple of days. But if that meets exspectations is unshure. You can set exspectations so high that it will always be a failure in your eyes.

Also gundam has so much merchandise (not only gunpla, but books, art, figures, statues, bags, etc......) that it's hard to judge it just by the gunpla.

Also when something is succesful companies tend to imagine that any successor will always do better, they never anticipate any downfall, let alone they take into account economic crisis. But sales are not a standard to which one should judge quality.

Personaly i'm a big fan of seed destiny even if it's a failure to some.

suiton629 2013-04-09 06:51

Quote:

Originally Posted by Washu-Chan (Post 4628019)
Question: What were the GSD Gunpla sales like during its original broadcast? Based on rumors, they didn't sell well compared to the Seed Gunpla, with the exception of the Strike Freedom.

And given that Bandai's view is that the show is a "failure" (regardless of their performance and reception) if the show's Gunpla sell below expectations...

I don't think Seed and Seed Destiny were a "failure" per say. Why else would Bandai be doing those Remastered version releases/MG releases for ones we never got?

As well as, Sunrise doing the HD Remaster TV series for Seed and now Seed Destiny?

It's just Bandai trying to milk the franchise, and they're doing a pretty damn good job milking it..LOL

Personally, I would've loved to see them do a Remastered version of Gundam Wing w/ HD visuals followed by a Remastered version of Endless Waltz. Then we could get like RM Ver for Wing EW, Wing Zero EW, and then release the rest of the movie suits from Wing (Nataku, Heavyarms Custom, Sandrock Custom, Tallgeese III)...

I guess we'll have to wait on that though.

But I mean look at how popular Kira is from Seed and Seed Destiny.

Bonta Kun 2013-04-11 11:39

Got me some spare cash, so decided to get me a couple of HGs and so thought I'd take my dive into AGE.
Atm decided on the AGe-1+razor parts and G-Exes but not sure what to get as a 3rd.
I want G-Bouncer but it's outta stock, Legilis also wanted but also out of stock, Spallow took my fancy as well but figure I'd leave that for a sale I think.
So looking at whats available, Ghirarga looks pretty cool, whats that like?

And also why in the hell don't we have a HG Khronos?:confused::mad:

Obelisk ze Tormentor 2013-04-11 11:46

........

Kinda quiet in here. Let me lighten things up a bit.

I’ll share some pics of my kit then. Since I hate to put the decals on my MG Deathscythe Hell (I think it will ruin the aesthetic), I decided to put them on my 1/100 instead. So, here it is, my 1/100 Deathcythe with the MG’s decals :D (beware of the size):

Dynamic tag cannot be rendered. (PrintableThread)
And to celebrate Destiny Remaster, here’s some pics of my Chaos (again :heh:):

Dynamic tag cannot be rendered. (PrintableThread)

suiton629 2013-04-11 12:44

Quote:

Originally Posted by Bonta Kun (Post 4631391)
Got me some spare cash, so decided to get me a couple of HGs and so thought I'd take my dive into AGE.
Atm decided on the AGe-1+razor parts and G-Exes but not sure what to get as a 3rd.
I want G-Bouncer but it's outta stock, Legilis also wanted but also out of stock, Spallow took my fancy as well but figure I'd leave that for a sale I think.
So looking at whats available, Ghirarga looks pretty cool, whats that like?

And also why in the hell don't we have a HG Khronos?:confused::mad:

Shop around a bit.
A lot of retailers actually combine all 3 variations of the Age-1 HG's as well as the Age-1 MG's into 1 savings bundle these days.

Skye629 2013-04-11 20:13

Quote:

Originally Posted by Bonta Kun (Post 4631391)
Got me some spare cash, so decided to get me a couple of HGs and so thought I'd take my dive into AGE.
Atm decided on the AGe-1+razor parts and G-Exes but not sure what to get as a 3rd.
I want G-Bouncer but it's outta stock, Legilis also wanted but also out of stock, Spallow took my fancy as well but figure I'd leave that for a sale I think.
So looking at whats available, Ghirarga looks pretty cool, whats that like?

And also why in the hell don't we have a HG Khronos?:confused::mad:

Highly recommend one of the AGE-2 kits, they're great

suiton629 2013-04-11 20:35

If you're going to get he Age HG kits, I would suggest you stick with the leads since they've now all been release (almost).

Spoiler:

firefox 2013-04-12 06:02

Quote:

Originally Posted by Bonta Kun (Post 4631391)
Got me some spare cash, so decided to get me a couple of HGs and so thought I'd take my dive into AGE.
Atm decided on the AGe-1+razor parts and G-Exes but not sure what to get as a 3rd.
I want G-Bouncer but it's outta stock, Legilis also wanted but also out of stock, Spallow took my fancy as well but figure I'd leave that for a sale I think.
So looking at whats available, Ghirarga looks pretty cool, whats that like?

And also why in the hell don't we have a HG Khronos?:confused::mad:

i've built 6 1/144 HG AGE models this far, they are all very good! I have 15 in the closet waiting till i retire to get built :D.

Least good, but still a nice model was the shadoll custom.
I really love the adel, even if it's a retool mass production age-1.
I'm also a big fan of the genoace, if you like MP suits.

AGE-1 is a good choice it's a great, easy model, very well posable. G-exes is also cool, but G-boucer is a beter model.

Overall AGE doesn not have any bad models, just pick the design you like and that's available :)


All times are GMT -5. The time now is 10:09.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.