AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Akuma_Blade 2009-12-26 12:27

Quote:

Originally Posted by Akuma_Blade (Post 2833008)
1- I'll plan to buy Force Impulse and Sword Impulse, but I was heard so both units Core Splender's not-pre paint. I haven't a airbrush or garage equipment. Can I'll paint them only with "Gundam pen sets"?

2- If I will buy Gryphios War Set ( special box for Gundam MK II , Zeta and Hyaku Shiki ) and Super Gundam, can I combine Super Gundam's G Defenser with Gryphios War Set's Gundam MK II?

Please help :(

Lime soda 2009-12-26 12:54

I wouldn't go and use the Gundam marker's tip to paint but the actual paint in it should be decent. A brush would do a better job but there's a long list of tips that you should probably check into before trying right away. There should someone here who can link you to a guide.

If you're gonna get a MG Force and Sword impulse, you wouldn't really see the core splendor if you're going to display the Gundam in normal mode. From what I've seen, the Sword and Force impulse look good without much paint. You could buy a cheap HG kit along with them and experiment on that. You can paint a MG once you're confident in your skills.

I don't know anything about the second question though.

Akuma_Blade 2009-12-26 13:39

Thanks for answering 1st question, Lime_Soda, but MG kits very expensive for me. I think, I'll persuade ones for painting or I'll quit buy Impulse kits :(

Super Gundam set includues Gundam MK II and G Desenser unit ( perhaps, G Defenser + MK II = Super Gundam ) but Gryphios War Set's MK II new production model. I'm not know combining possibility of Gryphios War Set's MK II and G Defensor

Grphios War Set, produced March 2006

MK II + G Defenser, produced November 2002

Sir Dearka 2009-12-26 18:22

Quote:

Originally Posted by Akuma_Blade (Post 2838729)
Please help :(

MG Impulse (both Force and Sword) are still my favorites among the MGs. They look amazing even without paint. A bit of panel lining is just enough.

Un1ver5e 2009-12-26 18:33

Bandai Action Kit Universal Cup (Bakuc) 2009 Finalists

Champion - Singapore
http://img.photobucket.com/albums/v2...Bakuc09023.jpg

1st Runner up - Italy
http://img.photobucket.com/albums/v2...Bakuc09036.jpg

2nd Runner up - China
http://img.photobucket.com/albums/v2...Bakuc09025.jpg

More pictures: http://www.netmorks.org/forum/viewtopic.php?id=2319

The Italy entry is so epic, lol.

GN0010 Nosferatu 2009-12-26 19:15

Isn't this the same girl from last year?

http://img.photobucket.com/albums/v2...Bakuc09018.jpg

GN0010 Nosferatu 2009-12-26 20:24

Quote:

Originally Posted by Rising Dragon (Post 2839181)
Yeah, looks like it.

I'd like to view her Twin Drive System.:p

Rising Dragon 2009-12-26 20:29

... ignore that, Nosferatu. This damn forum just warped my post AGAIN.

kk2extreme 2009-12-26 20:29

Spoiler for size:


the italian one looks like my room :D

GN0010 Nosferatu 2009-12-26 23:19

Quote:

Originally Posted by Rising Dragon (Post 2839254)
... ignore that, Nosferatu. This damn forum just warped my post AGAIN.

I find it highly irregular that this only seems to happen to you. From what I've seen that is.

rocawarde 2009-12-26 23:49

Great detail on the Models :D:D:D

RAVNEN 2009-12-27 03:22

http://img163.imageshack.us/img163/2...oto0381.th.jpg

Hmmm...so simple..i wonder how the articulation would fare..

atlans89 2009-12-27 06:17

This year ends up with MG Victory ver Ka, I wonder what will be the next MG ver Ka? Maybe GP03, Ex-s or at worst Nobel Gundam.... If it will be something new, I'm looking for MG Deathscythe Hell in my wishlist

Lime soda 2009-12-27 08:19

With Unicorn Gundam approaching, maybe he'll do another MS from there. Maybe a grunt suit since they seem to get alot of attention recently. BUT, I hope it's the Delta Plus because it's been getting nothing at all lately.

And, it seems the MG Red Frame's Tactical arms can be positioned straight up when its docked on its back pack, like how Infinite Justice can do with its own flight-thingy. They haven't shown a picture of it with the sword arms. Maybe that'll be exclusive to the Blue frame.

WaytoDawn 2009-12-27 08:36

Hey guys, I need some urgent help here. I've heard someone said that it is possible to de-can a spray can in order to use the paint inside of it. Any ideas how to do so? You see, the only topcoats I have are all in spray can form. After using an airbrush, I realized that its much better to use the airbrush to apply the topcoat instead of using it directly from the spray can. I need to complete my model before the year ends, so can anyone give me some assistance? Thanks in advance!

Sworra 2009-12-27 09:25

Quote:

Originally Posted by WaytoDawn (Post 2839975)
Hey guys, I need some urgent help here. I've heard someone said that it is possible to de-can a spray can in order to use the paint inside of it. Any ideas how to do so? You see, the only topcoats I have are all in spray can form. After using an airbrush, I realized that its much better to use the airbrush to apply the topcoat instead of using it directly from the spray can. I need to complete my model before the year ends, so can anyone give me some assistance? Thanks in advance!

I seen a pic of someone de canning some spray out into a bottle.. here is the link, just scroll down you will find the pic.

http://www.dannychoo.com/post/en/213...+Tutorial.html

i never tried it myself but it depends on the spray can aswell.. good luck.

darkstrife 2009-12-27 09:58

Quote:

Originally Posted by supremeGUndam (Post 2838181)
Hey thanks a lot. also did you prime the areas you painted? also is the brilliant blue a close match to the original blue? thanks and sorry for all the questions :p

nah i dont prime at all, i only do it when the colour that i want is very different from the colour on the runners (i.e. i want to paint blue over red for example). if i'm just trying to paint a colour the closest to the runners i cant be bothered priming, to be honest i dont think there will be a huge difference at all.

the brilliant blue is 'slightly' darker then the blue on the runners, although i do like the darker tone as it makes the gundam stand out a bit, i normally always use brilliant blue if i'm painting it over a blue runner

hope this helps :)

also really looking forward to the MG red frame, so far it looks pretty badass. also did anyone know that 2010 is the '30th anniversary of Gunpla'? so expect some surprises from Bandai :p

darkstrife 2009-12-27 10:04

speaking of the MG Red frame, heres a pic of it:

Release: 02/10, Price:5250 yen (slightly pricey for MG but so much armaments :) )

http://farm3.static.flickr.com/2732/...1a8ac8b8_o.jpg

Okamidum 2009-12-27 11:51

Now we can replicate all 30 gn tau drives! :D
http://farm5.static.flickr.com/4011/...959ddb12_o.jpg

JackRydden224 2009-12-27 15:17

Quote:

Originally Posted by Okamidum (Post 2840129)
Now we can replicate all 30 gn tau drives! :D
http://farm5.static.flickr.com/4011/...959ddb12_o.jpg

So Bandai clearly wants us to buy multiple GN-Xs to fill up the drive holders...

I guess people wouldn't mind as long as we are talking about variations.


All times are GMT -5. The time now is 09:04.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.