Haha MG Ex-S.
The mother of all bricks!

I want a MG Kshatriya (or when I land a better job and it wont come ill get the resin I geuss)

Don't care if it lacks posability and whatnot, it's big, has loads of detail, and a truckload of parts. It will take at least a week to build, and building it is the fun part!

Is there *any* hope whatsoever of a HGUC V2 Gundam in the relatively near future? Sure, I could get the 1/144 no grade, but that's a fifteen+ year old kit that won't look very good next to the HGUCs I want to display it with...


SP

Bandai usually release the Condenser Blades in green, so I think THAT is safe at least. The visor I think is more unlikely.

That doesnt mean they wont. Bandai was just in the middle of milking some of those who compatible runners. I'm hoping they'd do more too.

Its cool then, two is good enough even if its an accident. I just want mine to be able to do it.

I think I'd cut the pegs and use the modeling cement on them. And if cement wont work I can just paint the surface and stick it before it dires right. I swear paint is the strongest permanant glue I've seen........

-----------------



By the way, if its not mentioned yet, there's an add on set for the HG 00Q in the February issue of the Hobby Japan. The official release date for the mag is on Christmas aka 12/25. News and pic credit goes to Homeless plus wherever she gets it from.

http://img294.imageshack.us/img294/6...1535151492.jpg

00Q for nearly half it's price slashed. Only at premier of the movie. Is Bandai trolling at the mainstream consumers or what ?

give me the metallic ver & i will buy =x

More like trolling western fans, we already pay shitloads of money to import/ship them over.

anyway I think the rumored 2010 PG will be 00Qan[T] due to PG 00raiser having chest space for a GN drive and all.

Has anyone tried Krylon Acrylic Crystal Clear Satin as a topcoat before? If anyone has used it, what is the quality like? And what is the difference between Satin and Flat? I'm looking for a matte finish so which one would be best? And also, if I am going to spray this over just panel lines and decals (no paint) to make plastic seem/feel less plastic-y is this the right choice?

I would prefer to use this than Mr. Topcaot since the Krylon is in a local store near me. =D
Here is the website for it: http://www.krylon.com/products/acrylic_crystal_clear/ (i'm referring to the flat/satin colors even though the website image says gloss =D )
Thanks in advance.

That Krylon is a gloss coat so you wont get a matt finish. If there is another Can of that stuff that says Clear and Flat then id say try it out. I for one have no used the product but i thought id give you a heads up from the webpage you linked us. Good luck.

Haha i looked back at that webpage link and they do have the Flat clear coat. Don't bother with Gloss or Satin, I think satin is a semi gloss.. but i could be wrong.

not really, I never like the clear see through models. I only care about the special addons versions.

I don't see the point in clear HGs, there's not really any frame to see...

HG 1/144 GNT-0000 00 QAN[T]
Now wait for 3 others partners mobile suits.....
Zabanya,Harute, Raphael.......
Don't know later will got any adding weapons or not?
http://i900.photobucket.com/albums/a...8/DSC01137.jpg
http://i900.photobucket.com/albums/a...8/DSC01139.jpg
http://i900.photobucket.com/albums/a...8/DSC01141.jpg
http://i900.photobucket.com/albums/a...8/DSC01145.jpg
http://i900.photobucket.com/albums/a...8/DSC01148.jpg
http://i900.photobucket.com/albums/a...8/DSC01149.jpg

Project that I've been currently working on, a Gouf Custom resin conversion kit for the Gouf 2.0 frame. Here's the progress details: http://gamerabaenre.com/gouf_conv_prog.htm

The kit is still in progress so here's a teaser picture:


Baring anything catastrophic happening, I should have this sucker completely by the end of this weekend...

Beautiful Gouf. It looks really menacing.

Both Braves get a November release! WOOT!

http://ngeekhiong.blogspot.com/2010/...dam-super.html

Does anyone have Angelo Sauper's Geara Zulu yet?

Wahhhhh I'm so jealous......my store does not have it yet -_-

Yea, there confirmation of an addon. Its coming with the Hobby Japan February Issue as a limited release.

The release date officially is 25/12 2010, aka Christmas.

Just finished this guy: http://gamerabaenre.com/?p=1073

Completed page: http://gamerabaenre.com/gouf_conv.htm
Progress page: http://gamerabaenre.com/gouf_conv_prog.htm

Another fine one I must say.

Someone should try modding the 00 Quanta shield so that it can hold 00 Gundam equipment, such as 0 Raiser wing binders, 00 Seven Sword/G equipment, etc.

Anyone have a suggestion for a conventional/easily available glue-ish thing that I can use for tightening ball joints? I'm not very experienced with super glue and cement, so I'm not that keen on using those.

Someone used blu-tack...

As for super glue - what kind do I use, and how do I use/apply it? The super strong version?

I guess you could use any super glue really, as long as it doesn't melt/mold the plastic peices together. I'd apply a thin layer on the ball, let it dry and see if it's tight enough then, don't put it in the socket while it's not dry, to be safe.

New official images of the HG Gundam Harute:

http://img834.imageshack.us/img834/3482/toygdm1244.jpg
http://img295.imageshack.us/img295/4...ygdm124402.jpg

Flawless victory.

That is one sexy beast!

How's the estimated ETA to the 1/100 releases? I must own Zabaniya and Harute in their full glory. Wallet be damned, I want them with full gimmicks!

Pure badass!

It'd be cool if they have the 6-eyes gimmick for the 1/144 Harute

Probably not, even if it does, it'll be part-swapping with a new head. 1/144's too small to do this...

Anyway, I LOVE the Harute. Can't wait to get my grubby paws on it... :D

im so gonna get harute :love: maybe 2? =x

Personally, I'd recommenda againts using superglue. I've personally had bad experience with them as far as ball joints are concerned. They can stick, problem is that that once you forcibly move them around the cohesion breaks and they become even looser than before. Thats just my experience however. Maybe my superglue just sucks, I'm sure different ones would work differently in practice but its just the experience I have with mine.

My prefered solution is painting the surface of the joint and then wait for it to dry. It makes it a stronger joint in general. I've only used black however, I remember reading that advice once on this thread and it has work wonders for me personally. Painting the inside part of where the joint connects to helps too.

Just dont connect when its still wet, otherwise its impossible to remove. Wait till it dried completely. Just painting with a brush is enough.





NOW THIS IS THE REASON IVE CHOSEN YOU AS MY FAVOURITE TRAILBLAZER DESIGN ALL THIS TIME!!!!!!

I can't take my eyes away from that red crotch...

Anyway, how much sticker do you guys think this model have?

Why did they wait this long to make an awesome entry into the Kyrios line?

Kyrios = awesome, Arios = meh (even with GNHW/M), Harute = fantastical.

I'm guessing the cockpit, chest, eyes, arm circles, and maybe even the yellow pieces on the head (hopefully not)


On a side note, if i were to spray the inner frame of the MG Red Frame Astray with topcoat, if some of the topcoat were to go into the joints, would it cause the joints to seize up and not move anymore once its dried?

Wow. :love: Damn, I can't choose between Harute and Zabanya :( :( So does Harute definitely stand on its own then? Cause its butt still looks huge but there doesn't seem to be that base any more.

Though, it might be standing because of the support from the two large guns.

The yellow "v-fins" on the head would definitely be molded in color, since they're large visible items afterall.

From previous pics the large grey sliver on the middle of the rifles (on the "blade" ) are definitely stickers, and they'll be using a sticking for the flight module "cockpit" (although unlike the Kyrios and Arios the part is made of glass now, so the sticker goes underneath).

Definitely Harute's Fighter mode look the best compared to Allelujah's previous Gundams

just need to see when it will be in action

I placed the QAN[T]'s binder on my 00 XN Raiser Eleven Sword G for some lulz.

http://www.daviddino.com/00qant01.JPG