AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

Kuroi Hadou 2010-09-19 12:37

Quote:

Originally Posted by RAVNEN (Post 3254522)
I got the kit,I'll say its a very good kit. For the action base you have to buy it seperately. Many MG does'nt need painting, panel lining would make kit standout more. Painting will surely bring more awesomeness to any kit.

That reminds me: What do you guys recommend for panel lining?

Sir_e 2010-09-19 13:12

im sorry to bother you al, but i have a (kinda noobish) question >_<
can I use any (wire) cutter for the sprues?
I recently received the HG 00 gundam+0raiser+gn sword III as a present, but I do not have any prior experience with plastic models and i'm kinda afraid that I will terribly mess up the kit and render it useless...
if anyone has any tips for this kit or what equipment i should get, it will be greatly appreciated

Kuroi Hadou 2010-09-19 13:30

Quote:

Originally Posted by Sir_e (Post 3254619)
im sorry to bother you al, but i have a (kinda noobish) question >_<
can I use any (wire) cutter for the sprues?
I recently received the HG 00 gundam+0raiser+gn sword III as a present, but I do not have any prior experience with plastic models and i'm kinda afraid that I will terribly mess up the kit and render it useless...
if anyone has any tips for this kit or what equipment i should get, it will be greatly appreciated

That depends on your patience. The quickest way would be to use a pair of scissors as far away from the piece as possible then use a pair of nail clippers to remove the nub. The most effective way would be to cut out the piece, wire cutters will work if there is enough space between the piece and the frame, and then just file the nub away. Either way, be sure to hold onto the piece with one hand while you're cutting the pieces away, otherwise they will either go flying or snap in half.

RAVNEN 2010-09-19 13:37

Quote:

Originally Posted by Kuroi Hadou (Post 3254564)
That reminds me: What do you guys recommend for panel lining?

Gundam markers would do the job. Maybe others can give u more info.

@Sir_e

I have never use wire cutter on gundam kit before,but its safer to use plastic nippers. Coz the plastic nippers cut through the plastic,so it give a clean cut & leave minimal sprue. Here a quick rundown on basic tool for gundam modeler by a famous Gundam reviewer on Youtube http://www.youtube.com/user/rrobbert...67/qT4a0G-2o7Y

Sir Dearka 2010-09-19 13:45

Quote:

Originally Posted by Beruko08 (Post 3254250)
Hi, everyone. I guess this is my first post here and i want to ask you some question about this guy
http://cgi.ebay.com/MG-Master-Grade-...f008f437c#shId
Is the kit good? Is it included its action base or i have to buy it separately? (because it's my first time to buy a MG kit). Also, does it look good without painting? :heh:

As RAVNEN said. I got the kit, too and I only used a Gundam marker for additional panel-lining. It remains one of my favorite MGs next to the Infinite Justice and Force Impulse.

Beruko08 2010-09-19 13:55

So, what kind of action base should i get? I'm going to get this one
http://www.1999.co.jp/eng/10057474
Does this support the kit?

GrimmReaperNL 2010-09-19 15:55

Quote:

Originally Posted by Beruko08 (Post 3254669)
So, what kind of action base should i get? I'm going to get this one
http://www.1999.co.jp/eng/10057474
Does this support the kit?

action base 2 you use for HG, 1/144 and such kits

for MG's you should use action base 1

GN0010 Nosferatu 2010-09-19 18:41

Ya know, seeing that Setsuna had a Flag, this might be our once chance to get a Robot Damashii figure of a NON GNMS.

I was also thinking about getting merchandise from the ELS. Anyone think we might get anything for them? Assimilated GN-XIV and Brave at the most?

Kuroi Hadou 2010-09-20 10:06

Quote:

Originally Posted by GN0010 Nosferatu (Post 3255046)
I was also thinking about getting merchandise from the ELS. Anyone think we might get anything for them? Assimilated GN-XIV and Brave at the most?

At the most. Given that they released the Season 1 & 2 Trans-Am suits (except Gadessa and Garazzo) I'm expecting at least a Trans-Am GN-XIV and Brave Commander-Type (and the Gundams of course). Still hoping for a Gadelaza though...

Do you guys think they'll release an HG 1/144 Qan[T] in Quantum Burst Mode, or do you think that will be solely an MG feature like Exia Ignition Mode? By the way, any confirmation on the HG 1/144 Raphael release date yet?

LoweGear 2010-09-20 13:28

Quote:

Originally Posted by Kuroi Hadou (Post 3256130)
By the way, any confirmation on HG 1/144 Raphael release date yet?

It'll be released on the 22nd, which is a day away.

Kuroi Hadou 2010-09-20 13:47

Quote:

Originally Posted by LoweGear (Post 3256368)
It'll be released on the 22nd, which is a day away.

The 22nd is Wednesday;) So its coming out the same day as the OST? They totally planned that:p

LoweGear 2010-09-20 13:48

Quote:

Originally Posted by Kuroi Hadou (Post 3256385)
The 22nd is Wednesday;) So its coming out the same day as the OST? They totally planned that:p

Well, it's 21 here in the Philippines as of right now, so to me it's only a day away. :heh:

Kuroi Hadou 2010-09-20 14:03

Quote:

Originally Posted by LoweGear (Post 3256387)
Well, it's 21 here in the Philippines as of right now, so to me it's only a day away. :heh:

That explains it then. It's two days away in the US... :frustrated::frustrated::frustrated:

GN0010 Nosferatu 2010-09-20 18:21

Quote:

Originally Posted by Kuroi Hadou (Post 3256130)
At the most. Given that they released the Season 1 & 2 Trans-Am suits (except Gadessa and Garazzo) I'm expecting at least a Trans-Am GN-XIV and Brave Commander-Type (and the Gundams of course). Still hoping for a Gadelaza though...

Do you guys think they'll release an HG 1/144 Qan[T] in Quantum Burst Mode, or do you think that will be solely an MG feature like Exia Ignition Mode? By the way, any confirmation on the HG 1/144 Raphael release date yet?

Dude, the Gadelaza is NOT going to happen, at least not in Robot Damashii scale, which is all about giving larger MS/MAs proper scale. There is a small chance it could get a model kit release, the but the scale would be extremely botched.

Kuroi Hadou 2010-09-20 18:32

Quote:

Originally Posted by GN0010 Nosferatu (Post 3256727)
Dude, the Gadelaza is NOT going to happen, at least not in Robot Damashii scale, which is all about giving larger MS/MAs proper scale. There is a small chance it could get a model kit release, the but the scale would be extremely botched.

I'm perfectly aware of that, but that doesn't mean I can't have hope.:mad: On another note, I'm surprised they haven't announced a GN-XIV kit yet.

GN0010 Nosferatu 2010-09-20 18:33

It's a given, all we need is just a confirmation. We'll get one before the year is out.

Kuroi Hadou 2010-09-20 19:06

Quote:

Originally Posted by GN0010 Nosferatu (Post 3256745)
It's a given, all we need is just a confirmation. We'll get one before the year is out.

No doubt. I'm just somewhat surprised that it wasn't announced with the Brave kits.

GN0010 Nosferatu 2010-09-20 19:11

Well the Braves are entirely new MS. The GN-XIV is an inevitable entry to the GN-X lineage. The Braves have more importance over the GN-XIV.

Kuroi Hadou 2010-09-20 19:13

Quote:

Originally Posted by GN0010 Nosferatu (Post 3256793)
Well the Braves are entirely new MS. The GN-XIV is an inevitable entry to the GN-X lineage. The Braves have more importance over the GN-XIV.

Makes sense... but if that's the case then why release the 00 Condenser Type so early?

GN0010 Nosferatu 2010-09-20 19:29

Quote:

Originally Posted by Kuroi Hadou (Post 3256797)
Makes sense... but if that's the case then why release the 00 Condenser Type so early?

Because it's a Gundam. Gundams will always take priority over grunts in terms of release.


All times are GMT -5. The time now is 14:12.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.