AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

GameraBaenre 2007-05-16 13:59

Quote:

Originally Posted by subaruhess (Post 949041)
Impressive, I really like the chrome red you used on the first one I take it these have been built for fitchenfoo's kampfer competition?

Thanks. Actually the Metallic red was a commission piece that I just turned over to the customer. The White one was built about 2 years ago so it doesn't qualify for FF's competition. And I'm still debating if I should bother entering the Desert one or not :) That said, I could also enter the metallic one, but I don't think I did too great a job on it anyways...

gummybear 2007-05-16 14:48

Quote:

Originally Posted by LoweGear (Post 944217)
Talk about fast... someone just made a resin kit of the Evolve 15 RX-78-2...

http://i6.photobucket.com/albums/y20...8987700528.jpg
http://i6.photobucket.com/albums/y20...8987773597.jpg



OMG I am in love again, That Gundamn was one of the best looking one I seen so far. It has so much "character" to it. But then it's a resine kit... *cries*

reivaj 2007-05-16 19:26

i think gamera should totally paint one for me lol

Shinji103 2007-05-16 19:44

Aaaaaand, Master Grade #100 is:

Turn A Gundam, slated for an August release.

http://aeug.blogspot.com/
http://happy.ap.teacup.com/runchickens/
http://happy.ap.teacup.com/runchickens/476.html


Can't say I'm overjoyed, but I'm not dissappointed at least. Far better than another rehash of the RX-78-2, imo.

aardvark 2007-05-16 19:48

Quote:

Originally Posted by Shinji103 (Post 949459)
Aaaaaand, Master Grade #100 is:

Turn A Gundam, slated for an August release.

http://aeug.blogspot.com/
http://happy.ap.teacup.com/runchickens/
http://happy.ap.teacup.com/runchickens/476.html

I can't believe it :D :D

RX-93 HI-NU 2007-05-16 20:15

Best gundam news I have heard in a while.

dodgethis_sg 2007-05-16 20:24

I am crying tears of joy. My faith in Bandai has been restored.

thephreak 2007-05-16 20:30

while i dont share the enthusiasm as dodgethis_sg, i think its alrite. something about the turn A design just doesnt work for me

mangatron 2007-05-16 20:42

While I have nothing against the Turn A MG, I was hoping for a all in one Rx-78 lol. Well, kinda :heh:

Guess that TV colors Rx-78 will do.

But putting the Turn A MG aside, that HGUC Zock rocks! Check out those schematics lol :heh:

Shinji103 2007-05-16 21:17

One point of note is that the actual picture in my previous post doesn't say that it's an MG, only that it's a 1:00. So to keep wannabe bubble bursters quiet before they even start :p :

http://pam.main.jp/cgi/mailbbs/mailbbs.php (second picture down)

Meehlimo 2007-05-16 21:19

UGH im not happy wanted sumthing better that gundam hurts the eyes

theOtherGuy 2007-05-16 21:26

I'm not impressed... IMO, V2 Assault-Buster > Turn-A

Shinji103 2007-05-16 21:41

Quote:

Originally Posted by theOtherGuy (Post 949616)
IMO, V2 Assault-Buster > Turn-A

Agreed, but it could have been worse.

LoweGear 2007-05-16 21:58

Not exactly a Turn A fan, but this is good news at least to quell the unbelievers :D

Nightengale 2007-05-16 22:11

Does this mean we'll be getting MG dirt along with MG missiles along with Turn-A?

LoweGear 2007-05-16 22:20

Or even better, Moonlight Butterfly effects parts... *drools*

thephreak 2007-05-17 00:44

on a different note, i really think they need to make a MG of Justice or Infinite J. but thats me, some of u may have had enough with SEED, but i just think Bandai has gone too far with so many Freedom models (even though its popular).

aikming 2007-05-17 01:13

Quote:

Originally Posted by thephreak (Post 949841)
on a different note, i really think they need to make a MG of Justice or Infinite J. but thats me, some of u may have had enough with SEED, but i just think Bandai has gone too far with so many Freedom models (even though its popular).

agreed, there should be at least one for MG grade.


By the way, MG 100th is Turn A gundam as of this ????? Hope I'm wrong.

dodgethis_sg 2007-05-17 01:25

The perfect Turn A diorama: The scene where they use it to dry thier laundry.

LoweGear 2007-05-17 05:02

Quote:

Originally Posted by aikming (Post 949869)
agreed, there should be at least one for MG grade.


By the way, MG 100th is Turn A gundam as of this ????? Hope I'm wrong.

Yep, THAT Turn-A, that has a love/disgust relationship with alot of Gundam fans. At least we didn't get another RX-78 as most people thought, and it'll be nice to know see how they manage the frameless Turn-A.

I now want to see those MG production sketches in their glory. :heh:

dodgethis_sg 2007-05-17 06:47

http://happy.ap.teacup.com/runchickens/490.html

They're including the cow that Loran transported in his chest silos in the middle of the show.

LightningZERO 2007-05-17 06:53

Turn-A??? That's disappointing. Well, at least I can save money

mangatron 2007-05-17 07:38

Quote:

Originally Posted by LightningZERO (Post 950094)
Turn-A??? That's disappointing. Well, at least I can save money

lol this has to be the most smartest comment about the Turn A MG yet :heh: :heh:

I didn't realize I could save money by not buying it, but then again I normally buy things with little disregard to the cost so.....:heh:

duotiga 2007-05-17 09:03

is it me or i find the refine Turn A lookable?

Archer 2007-05-17 09:30

Please note that the Turn A used for that display is not the actual MG Turn A.

W-General 2007-05-17 10:27

YESSSSS!!!
THANK YOU BANDAI!!!!!

Now both my favorite mech of all time in Gundam will be/have been released:
Hi-Nu and Turn A.

While I haven't gone out of my way to buy the Hi-Nu, you bet I will be getting Turn A as soon as it comes out.

TURN A TURN.....TURN A TURN......TURN AAAAAAAAAAAAAAAAAA

OMFG, even with cow part and missile part!
Looks like I'll have to go outside and dig up some dirt to store the missile :D

Moonlight Butterfly parts would be cool too Bandai ;)

aikming 2007-05-17 20:51

Does Turn A looks nice??? or is it just because of the anime that fans like it. It looks quite horrible to me to have an MG for turn A. Though fans of turn A would love it.

Critias 2007-05-17 21:29

Meh, Turn A...that's ok I suppose.

Although I feel it is somewhat...anticlimatic.

So fine fine, release Turn A.

No give me my damn MG Gundam X!

W-General 2007-05-17 21:59

I like Turn A not because it looks 'awesome' 'cool' 'badass' or anything. If I want the above qualities, there's already MG 1-99 for that (minus stuff like Acguy, which is still cute in its own way).

Turn A has this down-to-earth warmth to it...when I get my Turn A MG, I want to re-enact all the famous scenes in the anime. Like using the heat dissipators to dry clothing lines, or hold the cow in its missile silo, or store nuclear missile using dirt...:)

Of course if Turn A comes out, Turn X should also be released eventually. Now no one will complain that Turn X is a totally excellent design.

Treize Khushrenada 2007-05-18 00:31

Whew now that they've made Turn A we can stop talking about it.

Now let's get on that MG Hamma Hamma.

DangerousK 2007-05-18 01:01

The Turn-A is nice, but it would've been cool to see them make the Xi into an MG; that would've been enormous.

U<3Anime 2007-05-18 03:45

Wow pretty unique for Bandai. I already digged the original turn A design as a kid. This MG redesign makes it even look cooler : D.

duotiga 2007-05-18 08:40

wonder if got moonlight butterfly effects or not :D

mdauben 2007-05-18 08:51

I'm still rather new to Gundam modeling (atlhough not to plastic models themselves) and had a question.

I'm a fan of the Gundam Wing series (I know, don't hate me for it!;) ) so I've been collecting the 1:100 HG models of the Gundams from that show. I have most of them now, except the Heavyarms and Sandrock. I can't find either of these except in the "Custom" version (the upgrade that took place about half-way through the series). I prefer the original versions of both these Gundams (especially the Heavyarms). Was there ever a 1:100 scale model of these original suits done?

I know the 1:100 HG model of the Tallgeese III can acutally be built as either Tallgeese III or the original Tallgeese I, are the models for the Heavyarms Custom and Sandrock Custom by any chance the same, and have the parts to build them as the original versions from the beginning of the series too? :confused:

Thanks! :)

Catalyst_87 2007-05-18 09:35

Hi, i'm new to this forum, i just got into gundam modelling last yr and are enjoying it, the building, air brushing the lot!!!!!!.

I'm currently working on a MG F91 Harrison's custom verion, and i was wondering if the MG Crossbone Full Cloth ver is any good???, there arn't very much reviews on it on the internet. Can anyone tell me if it has any flaws, like the HG freedoms and the strike freedoms which looked funny except the MG ver of those.

What i know of is that it's like the f91 models it dosen't have any polycaps like all other models does, and are smaller than the regular MG models.

Any opinions would be helpful as i don't wanna waste money and time on something that looks crappy at the end!!!!

mangatron 2007-05-18 10:40

Quote:

Originally Posted by mdauben (Post 951704)
I'm a fan of the Gundam Wing series (I know, don't hate me for it!;) ) so I've been collecting the 1:100 HG models of the Gundams from that show. I have most of them now, except the Heavyarms and Sandrock. I can't find either of these except in the "Custom" version (the upgrade that took place about half-way through the series). I prefer the original versions of both these Gundams (especially the Heavyarms). Was there ever a 1:100 scale model of these original suits done?

Thanks! :)

In a 1/100 size, I don't think so. According to this store their complete set doesn't have them, and several searches online doesn't show any either. I do believe they were in 1/144 size, but then again there's always a 1/144 size :heh:

And about HeavyArms Custom and Sandrock Custom being interchangeable, no I believe not. It's not like the Tallgeese that has one major color for both versions, whilst HeavyArms was red, HeavyArms Custom is green. Sandrock Custom, I think it had a radical change in design that doesn't allow it to look like the Sandrock, but then again I wouldn't know as I don't have those. Hope that helps.

Sety 2007-05-18 10:51

Quote:

Originally Posted by LightningZERO (Post 950094)
Turn-A??? That's disappointing. Well, at least I can save money

Silence you. Turn-A is superior.

Instant pre-order for me period.

mdauben 2007-05-18 10:53

Quote:

Originally Posted by mangatron (Post 951816)
In a 1/100 size, I don't think so.

I've done a fair amount of on-line searching, so I was pretty sure that was the answer. I just figured it didn't hurt to ask. :(

Thanks! :)

dodgethis_sg 2007-05-18 11:34

I'm certainly enjoying the bitchfests on various forums about Turn A being the 100th MG.

subaruhess 2007-05-18 11:44

Quote:

Originally Posted by mdauben (Post 951704)
Was there ever a 1:100 scale model of these original suits done?

There were version KA resin kits to convert the old gundam wing 1/100s into their original/katoki designs but they are long since discontinued. You'd have to do a bit of research to find out if anyone can do a recast of them. Hobby link japan still have them in their catalog but you cant order them any more. Or you could just wait till bandai release a master grade version, seems everyone is.

http://www.hlj.com/product/BCL1990
http://www.hlj.com/product/BCL1979


All times are GMT -5. The time now is 10:26.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.