AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

suiton629 2013-07-30 14:31

Quote:

Originally Posted by Providenceangle (Post 4776369)
My thoughts are that, it's simply a recolour. That's why it's not getting anything new. Just recolour it and put it out as, an online exclusive to make some added cash.

Maybe they're gonna release the Assault Jacket as online exclusive as well?

Providenceangle 2013-07-30 14:49

Quote:

Originally Posted by suiton629 (Post 4776372)
Maybe they're gonna release the Assault Jacket as online exclusive as well?

Make a complete new mold for an online exclusive, for an online exclusive... I wonder? Derp.

Skye629 2013-07-30 14:50

Quote:

Originally Posted by duotiga (Post 4775926)
the base is call damashii stage 5 clear ver . is actually for damshii figurines
now this stand is pretty rare

Dang, do you know which other Damashii stands work with gunpla?

Quote:

Originally Posted by suiton629 (Post 4776372)
Maybe they're gonna release the Assault Jacket as online exclusive as well?

Probably not, because if they were planning to, now would have been the time. Instead they opted for the cheaper recolor (understandable)

suiton629 2013-07-30 15:07

How come we don't have anything on MG Freedom RM Ver. or MG Justice?

Providenceangle 2013-07-30 15:19

Quote:

Originally Posted by suiton629 (Post 4776407)
How come we don't have anything on MG Freedom RM Ver. or MG Justice?

Because there is a high chance, it's not going to happen. I could understand the mg release of the strike rm. It was there for the release with the other suits but, I can't see this happening. The Freedom is really good. Especially since I just built it for the first time recently. A proper justice would be nice but, the ∞Justice is very good.

Looking at the Zero Proto... I think I'll get it. Depending on how the finished product looks, I'm pretty much sold on it.

suiton629 2013-07-30 16:01

http://1.bp.blogspot.com/-q6tOfLCfrc...jc/s1600/1.jpg

So then what was this all about?

Providenceangle 2013-07-30 16:46

Quote:

Originally Posted by suiton629 (Post 4776453)

The katakana says erusutoraiku gundam? lol I think it's talking about the strike RM... It's talking about the Strike RM, promoting Seed HD.

This would be MGフリーダムガンダム" MG freedom gundam"

Wow they really pronounce strike as Sutoraiku. lol

suiton629 2013-07-30 16:48

Quote:

Originally Posted by Providenceangle (Post 4776486)
The katakana says erusutoraiku gundam? lol

So Aile Strike Gundam?
So why is the Freedom there?

Providenceangle 2013-07-30 17:00

Quote:

Originally Posted by suiton629 (Post 4776490)
So Aile Strike Gundam?
So why is the Freedom there?

They are showing a MG Freedom gundam. It's clearly the original as well. It's the perfect Strike with, freedom.

I'm not in charge of the magazine so I can't say why they are showing it.

the headline is 機動戦士ガンダムseed= Kidou Senshi gundam seed. It's clearly and ad for Gundam Seed.

StrikeFreedomV2 2013-07-30 19:00

So, seems I will try GGinfinite soon. I want that red Legilis, and was thinking about painting one, but the official Bandai release is way cheaper than I expected. It even sells for the same amount as the regular Legilis on Bandais hobby shop. It really sucks that that shop is for Japan only :(

MoonLightShadows 2013-07-30 20:07

So Bandai's shop wont send anywhere else and is for Japan only. I was wondering about that, Was interested in getting that HGUC Base Jabber the MG Full armor Unicorn was released with or the operation capture of Jaburo color Zogok. :upset:

StrikeFreedomV2 2013-07-30 20:13

Quote:

Originally Posted by MoonLightShadows (Post 4776643)
So Bandai's shop wont send anywhere else and is for Japan only. I was wondering about that, Was interested in getting that HGUC Base Jabber the MG Full armor Unicorn was released with or the operation capture of Jaburo color Zogok. :upset:

I was trying to register at their site, and one of the first things they ask is where in Japan you live :upset: Its a shame, really. I would love to get some of their exclusive kits

panzerfan 2013-07-30 21:43

Speaking of Unicorn... I am wondering whether or not if there will be a Ver.Ka of Heavy Weapon System loadout for Nu, or Hi-Nu, just so that the retcon connection from Nu to Unicorn will be complete.

Another thing is the curious omission of mass production Nu by UC 96. Will Delta Plus and Sinanju Stein be pretty much it?

Skye629 2013-07-31 01:17

Quote:

Originally Posted by panzerfan (Post 4776717)
Speaking of Unicorn... I am wondering whether or not if there will be a Ver.Ka of Heavy Weapon System loadout for Nu, or Hi-Nu, just so that the retcon connection from Nu to Unicorn will be complete.

Another thing is the curious omission of mass production Nu by UC 96. Will Delta Plus and Sinanju Stein be pretty much it?

Nu never had a full mass produced mainstay MS last I checked, it did have a limited production run though for normal? forces. Delta Plus is not really related to it in any way and Stein as we know is a one-of prototype unit which ultimately got stolen

Im sure most ppl would be happy with a MG FA Nu Ka. :), though the chances of it are a bit low atm as I would assume a followup Sazabi would be the next highest priority kit

panzerfan 2013-07-31 03:53

Quote:

Originally Posted by Skye629 (Post 4776855)
Nu never had a full mass produced mainstay MS last I checked, it did have a limited production run though for normal? forces. Delta Plus is not really related to it in any way and Stein as we know is a one-of prototype unit which ultimately got stolen

Im sure most ppl would be happy with a MG FA Nu Ka. :), though the chances of it are a bit low atm as I would assume a followup Sazabi would be the next highest priority kit

Come to think of it, there is no official MG Nightingale at all... it's kind of a shame.

Skye629 2013-07-31 13:03

Quote:

Originally Posted by panzerfan (Post 4776922)
Come to think of it, there is no official MG Nightingale at all... it's kind of a shame.

To make it worse there is NO official kit for Nightingale in any scale whatsoever (excluding the resin kit)

Its quite tragic imo

Bonta Kun 2013-07-31 13:51

Quote:

Originally Posted by Skye629 (Post 4777302)
To make it worse there is NO official kit for Nightingale in any scale whatsoever (excluding the resin kit)

Its quite tragic imo

Not quite, it's hugely tragic!

The Nightingale is such a awesome MS, it really is a wonder why they haven't given us it yet even tho we got that BIG THE-O thing.
OK sure I'm guessing there will be some issues with it's size which would lead to high price but I'm sure people would be willing to pay for it no matter how much it cost.

Providenceangle 2013-07-31 16:26

Quote:

Originally Posted by Bonta Kun (Post 4777337)
Not quite, it's hugely tragic!

The Nightingale is such a awesome MS, it really is a wonder why they haven't given us it yet even tho we got that BIG THE-O thing.
OK sure I'm guessing there will be some issues with it's size which would lead to high price but I'm sure people would be willing to pay for it no matter how much it cost.

Maybe because it "sucks"? lol Who knows? When it comes to bandai, they often leave you scratching your head.

firefox 2013-08-01 01:00

Quote:

Originally Posted by Providenceangle (Post 4777439)
Maybe because it "sucks"? lol Who knows? When it comes to bandai, they often leave you scratching your head.

Why make one of the worst looking MS designs in the gundam universe into a kit that is gonna cost a fortune to please 5 desperate fans?

Nightingale is something that should have ended up in the paper recycling machine.

Luckily we got Shinanju :) Now that's design :)

duotiga 2013-08-01 07:36

Quote:

Originally Posted by Skye629 (Post 4776389)
Dang, do you know which other Damashii stands work with gunpla?

from what i know damashii stand should not have any issues with HG gunpla kits

Providenceangle 2013-08-01 08:10

Quote:

Originally Posted by firefox (Post 4777794)
Why make one of the worst looking MS designs in the gundam universe into a kit that is gonna cost a fortune to please 5 desperate fans?

Nightingale is something that should have ended up in the paper recycling machine.

Luckily we got Shinanju :) Now that's design :)

I agree... I wouldn't say it like that though. I prefer not to step on anyone's toes.

panzerfan 2013-08-01 12:43

This is what I've done so far. I suck in building models :(

http://s11.postimg.org/q8nojbc1v/gundam.jpg

I think I need to change the yellow part's color to a light haze grey.

Providenceangle 2013-08-01 12:50

You rushed the paint. When it comes to painting, you've got to be super patient. A good paintjob takes days! Average MG will take 5 days... That's without prep. Prep can take months!

Sworra 2013-08-01 12:55

Keep the yellow in there, Purple, violet goes good with yellow. I like it so far, keep up the good work!

panzerfan 2013-08-01 12:59

Quote:

Originally Posted by Providenceangle (Post 4778273)
You rushed the paint. When it comes to painting, you've got to be super patient. A good paintjob takes days! Average MG will take 5 days... That's without prep. Prep can take months!

Ok. Need to learn from this when I go into building the next parts. I also did the mistake of painting the runners directly. Thank goodness that the quality of the kit's just superb. This is miles ahead of the Tamiya 1:350 Yamato that I built a while back...

(at least I did sand and apply primer)

Providenceangle 2013-08-01 14:46

Quote:

Originally Posted by panzerfan (Post 4778283)
Ok. Need to learn from this when I go into building the next parts. I also did the mistake of painting the runners directly. Thank goodness that the quality of the kit's just superb. This is miles ahead of the Tamiya 1:350 Yamato that I built a while back...

(at least I did sand and apply primer)

Don't paint runners. I know it seems easier, but it's not. Just buy bamboo skewers. You can get them at places like walmart or zel... target? lol Lots of places. Then look at some crafting stores for alligator clips. Finally save a big piece of styrofoam. Or you could do something like this:

http://www.gamerabaenre.com/images/h...%20118_jpg.jpg

When it comes to painting on the runners, it's not going to turn out pro. You need to have the parts put together. Once they are fit then you sand based on the fitment. Then take apart, prime, paint, wait at least 24 horus, carefully snap fit, sticker, clearcoat, wait a few days. Then you can handle it, without too much risk of scratches. If you use acrylic you've got to be fairly careful, either way.

Also Sworra is correct. Leave the yellow. If anything just paint it a similar yellow.

panzerfan 2013-08-01 16:24

Quote:

Also Sworra is correct. Leave the yellow. If anything just paint it a similar yellow.
The yellows are actually painted yellow as well. About the only thing not painted is the inner frame.

Providenceangle 2013-08-01 16:25

Quote:

Originally Posted by panzerfan (Post 4778448)
The yellows are actually painted yellow as well. About the only thing not painted is the inner frame.

I know they are painted. The kit's original is orange-yellow, but if you're going to repaint it, go with a similar yellow at the most.

Obelisk ze Tormentor 2013-08-01 16:30

@panzerfan Nice color-combination. I agree with Sworra & Prov, the yellow goes well with the purple. Still, I thought you were gonna paint it in Hi-Nu's color scheme? Did you change your mind?

panzerfan 2013-08-01 16:43

Quote:

Originally Posted by Obelisk ze Tormentor (Post 4778454)
@panzerfan Nice color-combination. I agree with Sworra & Prov, the yellow goes well with the purple. Still, I thought you were gonna paint it in Hi-Nu's color scheme? Did you change your mind?

Kind of. I saw the original color for the Hi-nu, and I liked it better than the blue that Bandai chose for it.

Providenceangle 2013-08-01 16:54

Quote:

Originally Posted by panzerfan (Post 4778475)
Kind of. I saw the original color for the Hi-nu, and I liked it better than the blue that Bandai chose for it.

You painted it with spray cans?

panzerfan 2013-08-01 17:30

Quote:

Originally Posted by Providenceangle (Post 4778490)
You painted it with spray cans?

Yes. I think I need to get a real paint gun one of these days though.

Providenceangle 2013-08-01 18:36

Quote:

Originally Posted by panzerfan (Post 4778525)
Yes. I think I need to get a real paint gun one of these days though.

Airbrushes are pricy. You will pay around 300 for a full set... 3 tips I can give you... 1.)Gravity feed is your best bet 2.)Dual action for models is best 3.)Compressor should have a air tank.

Now from my experience, you don't need to get a special air compressor. Even a cheap one from an automotive place is good(Canadiantire has deals on them). You only need 3 things for it. Pressure regulator, water trap, fitting for your airbrush. All can be got for cheap, at the same place.

Now in terms of an airbrush. Iwata make decent dual action, gravity feed brushes, for around 140 dollars. I think it's the HC CP or whatever? It's a good one... It will be good enough for your needs throughout your skill level. You can buy paints at low cost, at the dollar store even(acrylic). You can use windex to thin them! Cheaper then paint thinner. NO! The blue colour won't ruin your paints.(it's soap and actually helps the paint flow better. Just make sure you mix it well.)

Don't let the price fool you either. You'll save a lot of money on paint. One of those small tamiya paints, will paint 2-3 MG, when your skill level improves. With an airbrush, you can paint layers as thin as paper, uniformly, good coverage, low waste.

panzerfan 2013-08-02 09:41

The hands on this kit are really unbelievable. This level of articulation is utterly amazing.

http://s21.postimg.org/q6njvpk87/hands.jpg
jpg images

(Going through fitting now. cleaning up as well)

Skye629 2013-08-02 14:58

Quote:

Originally Posted by duotiga (Post 4778014)
from what i know damashii stand should not have any issues with HG gunpla kits

So would any Damashii stand work with Gunpla then? What sort of connection does it uses? Same sort of peg?

Quote:

Originally Posted by Providenceangle (Post 4778581)
Airbrushes are pricy. You will pay around 300 for a full set... 3 tips I can give you... 1.)Gravity feed is your best bet 2.)Dual action for models is best 3.)Compressor should have a air tank.

Now from my experience, you don't need to get a special air compressor. Even a cheap one from an automotive place is good(Canadiantire has deals on them). You only need 3 things for it. Pressure regulator, water trap, fitting for your airbrush. All can be got for cheap, at the same place.

Now in terms of an airbrush. Iwata make decent dual action, gravity feed brushes, for around 140 dollars. I think it's the HC CP or whatever? It's a good one... It will be good enough for your needs throughout your skill level. You can buy paints at low cost, at the dollar store even(acrylic). You can use windex to thin them! Cheaper then paint thinner. NO! The blue colour won't ruin your paints.(it's soap and actually helps the paint flow better. Just make sure you mix it well.)

Don't let the price fool you either. You'll save a lot of money on paint. One of those small tamiya paints, will paint 2-3 MG, when your skill level improves. With an airbrush, you can paint layers as thin as paper, uniformly, good coverage, low waste.

Dont you also need one of those ventilation painting booth thingies?

Providenceangle 2013-08-02 19:33

Quote:

Originally Posted by Skye629 (Post 4779590)
Dont you also need one of those ventilation painting booth thingies?

A spray booth is nice. It's going to help with painting too. It not only helps to protect your lungs(wear a respirator anyway), It helps prevent over-spray. Do you need it? Yes/no. Yes, if you intend to use lacquer paints or other harsh chemicals. Yes, if you want to keep paint from going everywhere in your house. Yes, if you care about your health. You don't "need" it. You can use a cardboard box to prevent the over-spray from making a mess. Spray one colour at a time, to help prevent over-spray.

It's generally a good idea to have one, but so long as you work in a well ventilated area, are careful, don't paint hash paints indoors. You'll be fine.

bio9205 2013-08-03 00:12

So I've just tried doing the enamel wash method to panel line my RG Justice. I've encountered a problem, though: Every time I try to clean off the excess enamel paint with a cotton bud that I've dabbed in lighter fluid, there's always spots or even splashes of excess paint that I can't remove. Either that, or I accidentally remove the paint in the panels that I've already filled. Is there a better way to do this?

Also: RG SF and MG Sazabi Ver Ka announced! :D Both were kinda inevitable but it's nice to have confirmation.

Skye629 2013-08-03 00:28

Hooray! Said nobody ever, these two were the most predictable kits ever

http://4.bp.blogspot.com/-9aoPnbE273...4/s640/1ga.jpg

http://2.bp.blogspot.com/-9jCArHVgoW...s1600/1ggw.jpg

Skye629 2013-08-03 00:33

Quote:

Originally Posted by bio9205 (Post 4780110)
So I've just tried doing the enamel wash method to panel line my RG Justice. I've encountered a problem, though: Every time I try to clean off the excess enamel paint with a cotton bud that I've dabbed in lighter fluid, there's always spots or even splashes of excess paint that I can't remove. Either that, or I accidentally remove the paint in the panels that I've already filled. Is there a better way to do this?

Where are those excess parts located? Are you talking about hard to clean areas like near crevices or the inner parts of a raised section? Or just excess paint along the panel lines? Perhaps you are not using enough pressure while rubbing or the buds you are using are too dirty to clean properly? I tend to switch cotton buds for every segment (eg thighs, lower legs, feet, upper arms/shoulders, fore arms, etc)

Maybe you should also try dedicated enamel thinner for cleaning?

bio9205 2013-08-03 01:18

Quote:

Originally Posted by Skye629 (Post 4780125)
Where are those excess parts located? Are you talking about hard to clean areas like near crevices or the inner parts of a raised section? Or just excess paint along the panel lines? Perhaps you are not using enough pressure while rubbing or the buds you are using are too dirty to clean properly? I tend to switch cotton buds for every segment (eg thighs, lower legs, feet, upper arms/shoulders, fore arms, etc)

Maybe you should also try dedicated enamel thinner for cleaning?

What I'm referring to is the excess that flowed out of the panels on the parts itself or I dabbed on by accident, that I'm trying to clean off.


All times are GMT -5. The time now is 05:19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.