AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

theOtherGuy 2006-04-18 20:44

Oh, my mistake. Didn't make the browser go all the way down. :D

OmegaZEROCustom 2006-04-18 22:56

Quote:

Originally Posted by infested_ysy
Don't get this.

It doesn't fit properly on most 1/144 kits, though it perfectly fits the 1/144 Wild Falken kit I have.

Shit. Wish I'd seen this before I placed my order over the weekend, and it already shipped. Oh well. I can always mod the mounting point with some styrene pieces.

Oh, and Post 1000 of this topic! Yay! lol.

Akyra 2006-04-18 23:32

Quote:

http://www.hlj.com/product/HSGTT-29


However, I just saw these today, and while they aren't taking any orders right now, since they are like the larger MS Stands, I may get these instead when I can for my 1/144s:

http://www.hlj.com/product/YLSPPC-28

Has anyone tried the stands above? Infested has tried one of them, and it doesn't seem to fit the majority of 1/144 kits I presume?

Also, anyone know the site that has a the black/gold destiny? That guy has used a few stands for their 1/144s, wonder where they get those from...

infested_ysy 2006-04-19 00:11

Quote:

Originally Posted by OmegaZEROCustom
Oh well. I can always mod the mounting point with some styrene pieces.

Good luck with that. The mounting pieces are split into two, each part with half the ball joint. I have no idea how one can mod that.

Quote:

Also, anyone know the site that has a the black/gold destiny? That guy has used a few stands for their 1/144s, wonder where they get those from...
Which site? Japanese or English? If it's the former then you're a master of the obvious for wondering where they get them from.

OmegaZEROCustom 2006-04-19 01:19

Quote:

Originally Posted by infested_ysy
Good luck with that. The mounting pieces are split into two, each part with half the ball joint. I have no idea how one can mod that.

Elbow grease and a little bit of luck. Worst case scenario is I can create a peg on the end of the strut if I destroy the brace (assuming I mess it up) and use them for the Destiny 1/144's I have that don't have stands. And if all else fails, at least I didn't pay much for them. I'll just toss the struts, fill in the mounting slot and use them as regular bases.

Shinji103 2006-04-19 01:28

I take it this stand is supposed to keep it standing in a precarious position, since it doesn't look like it could hold up the full weight of a full model off the ground? :heh:

Btw, this thread hit 1,000 posts three posts ago. CHEERS! :D

OmegaZEROCustom 2006-04-19 01:37

If teh Mini-MS stand has proportionate holding power compared to it's big brother, it'll hold a 1/144 with no trouble at all. The bigger ones hold up MG's quite well, and seeing as how they have internal skeletons and the armor cover, the MG's are quite weighty compred to the HG 1/100's (at least I think so). Those wood posing dummies are not a good representative since they are solid wood and the models are hollow plastic.

Shinji103 2006-04-19 01:41

Hmm, pretty cool. I was judging more from the fact that it appears to be wire-metal in the supports, which is obviously less suitable for fully supporting models than a solid-base stand. But cool. It's nice and cheap, too. :)

Optimaximal 2006-04-19 08:00

It all depends on the quality and tensile strength of said wire... some of the thinest stuff around can also be the most rigid - then it comes down to centre of gravity.

duotiga 2006-04-19 08:56

Wednesday, April 19, 2006

Gunpla rumors
According to Plamoya-san's Useless Diary, following are rumors of future Gunpla releases after June.
Below are considered somewhat reliable:
HGUC Zudah (from MS IGLOO)
HGUC Zaku I (color variation)
MG Gundam F91

These are rumors:
HGUC Nu Gundam
HGUC ZZ Gundam
MG Guntank

Again take this with grain of salt.
¶ 4:16 AM

from gunota........

SlugZilla 2006-04-19 08:58

Quote:

Originally Posted by gunota
According to Plamoya-san's Useless Diary, following are rumors of future Gunpla releases after June.
Below are considered somewhat reliable:
HGUC Zudah (from MS IGLOO)
HGUC Zaku I (color variation)
MG Gundam F91

These are rumors:
HGUC Nu Gundam
HGUC ZZ Gundam
MG Guntank

http://d.hatena.ne.jp/MSA-011Ext/20060417 They say they are SOLID on Zudah, Zaku I and the F91!
As for the Nu Gundam and ZZ Gundam which are RUMORED, that would just make it even more interesting. They say that the Guntank rumor is unreliable but we'll see.

The_Marshal_AEB 2006-04-19 11:16

COMMON another ZUDAH 1/144 damn I want a MG of that, and I would really like to get HGUC ZZ and a MG GUNTANK

Shinji103 2006-04-19 12:20

The MG F-91 was announced (well, sorta) a while back by Bandai. They showed a blacked-out image of their next MG model, but you could clearly see it was the F-91.

Shinji103 2006-04-19 13:17

Btw, has anybody heard any planned release date or anything for the MG F-91? Its release was semi-announced a while ago, but since it's still said to be a rumor, I guess a release date is a bit much to ask. :/

What I want to see is an MG V2 Assault/Buster Gundam. :D :D :D It'll be expensive because of all the armor parts, but it'll be worth it. :D

OmegaZEROCustom 2006-04-19 14:16

It technically was never announced. It was shown as NOW PLANNING? Which Bandai did in the past with the Zeong and 2 others, and of them, only the Zeong actually was made. I can't recall what the other 2 were though.

That said, the reaction to the MG F-91 was so high, they'd be dumb not to makeone, but it still was never officially announced.

Meehlimo 2006-04-19 20:13

I want a MG F-91 a MG guntank would be cool cuz of the tanktred gimick.

Astronopolis 2006-04-19 20:13

Quote:

Originally Posted by Shinji103
What I want to see is an MG V2 Assault/Buster Gundam. :D :D :D It'll be expensive because of all the armor parts, but it'll be worth it. :D

i highly doubt the production of a MG from the V series, due to the extremely small size of the ms of that era. a master grade would be a little bit bigger than a 1/144, and to make it the same relative size to other ms in the series it would have to be in a different scale, so due to this i dont think bandai will ever touch the subject with a 50' pole

DarkWarrior 2006-04-19 20:20

Quote:

Originally Posted by Astronopolis
i highly doubt the production of a MG from the V series, due to the extremely small size of the ms of that era. a master grade would be a little bit bigger than a 1/144, and to make it the same relative size to other ms in the series it would have to be in a different scale, so due to this i dont think bandai will ever touch the subject with a 50' pole

Uh, you do realize that Gundam F91 is just as small as the Gundams from V right? If they release a MG F91, I don't see why they wouldn't make a MG from Victory later on.

Quote:

Originally Posted by Akyra
Has anyone tried the stands above? Infested has tried one of them, and it doesn't seem to fit the majority of 1/144 kits I presume?

The Hasegawa Flexible Stand for Robots is pretty good IMO. It's clear, so it doesn't quite stand out like those black stands, and has worked fine with the 1/100 kits I've tried. The only issue I have with it is the price.. seems a little expensive.

SlugZilla 2006-04-19 20:49

The MG F91 might be 1/72 to offset the size difference. I'm hoping it were 1/100 just for continuity but the extra detail in a 1/72 would be sweet.

Shinji103 2006-04-19 20:50

Quote:

Originally Posted by Astronopolis
i highly doubt the production of a MG from the V series, due to the extremely small size of the ms of that era. a master grade would be a little bit bigger than a 1/144, and to make it the same relative size to other ms in the series it would have to be in a different scale, so due to this i dont think bandai will ever touch the subject with a 50' pole

The mobile suits in Gundam F-91 and on in UC are are small-types (with the exception of heavy suiits like the Zanneck from V Gundam), so if they're going to make MG F-91, it won't be any real problem to make an MG V2. Basically, just what DW said. :heh:


All times are GMT -5. The time now is 17:58.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.