AnimeSuki.com Forum

AnimeSuki Forum (http://forums.animesuki.com/index.php)
-   Gundam (http://forums.animesuki.com/forumdisplay.php?f=40)
-   -   Gundam Models Discussion Thread (http://forums.animesuki.com/showthread.php?t=23320)

bio9205 2009-09-16 22:28

Hey guys! Anyone know where to get Gundam 00 character figurines?

vektar 2009-09-16 23:13

Quote:

Originally Posted by bio9205 (Post 2648959)
Hey guys! Anyone know where to get Gundam 00 character figurines?

try ebay they sometimes have them, i seen a setsuna a few times there.

darkstrife 2009-09-18 06:18

Can anyone provide any tips to how to join the wing section of the MG Freedom Gundam? I'm referring to the two long pieces (one light blue and the other dark blue) that snap together to form part of the wing section. It keeps snapping or falling off and if i want to adjust the wings a little a bit it always falls off, if anyone can provide some tips, that would be great!!!

SonicSP 2009-09-18 06:58

Does the HG Gadessa come with saber hilts?It dont remember any but it would have been great if it did,so one can use it.

Also,is HG Reborns sabers detachable or is it like the Ahead simultron where its just connected to the hilt?

pumpkins 2009-09-18 08:21

Quote:

Originally Posted by SonicSP (Post 2651469)
Does the HG Gadessa come with saber hilts?It dont remember any but it would have been great if it did,so one can use it.

nope, the beam sabers are moulded into the side armours. :)

Nerroth 2009-09-18 08:36

I gave my Gadessa the spare beam saber from the Ahead... or was it the GNX-III? Can't remember.


EDIT: Oh, and apparently the beam sabers are removable on the Reborns, as are the Large GN Fin Fangs - but not the 8 Small GN Fin Fangs.

Doesn't look like you can do the grappling thing with the Egner Whips, either.

vektar 2009-09-18 09:06

Quote:

Originally Posted by darkstrife (Post 2651432)
Can anyone provide any tips to how to join the wing section of the MG Freedom Gundam? I'm referring to the two long pieces (one light blue and the other dark blue) that snap together to form part of the wing section. It keeps snapping or falling off and if i want to adjust the wings a little a bit it always falls off, if anyone can provide some tips, that would be great!!!

mine did the same thing glue is your best bet, thats what i did to fix it with no problems. Just dont get any glue on the moving parts.

darkstrife 2009-09-18 09:21

Quote:

Originally Posted by vektar (Post 2651625)
mine did the same thing glue is your best bet, thats what i did to fix it with no problems. Just dont get any glue on the moving parts.

thanks for the tip vektar, are u referring to super glue or a special type of hobby clue?

vektar 2009-09-18 16:07

Quote:

Originally Posted by darkstrife (Post 2651651)
thanks for the tip vektar, are u referring to super glue or a special type of hobby clue?

i dont think it matters as long as its glue. i use testors cement for plastic models.

bio9205 2009-09-18 22:13

Quote:

Originally Posted by Nerroth (Post 2651588)
I gave my Gadessa the spare beam saber from the Ahead... or was it the GNX-III? Can't remember.


EDIT: Oh, and apparently the beam sabers are removable on the Reborns, as are the Large GN Fin Fangs - but not the 8 Small GN Fin Fangs.

Doesn't look like you can do the grappling thing with the Egner Whips, either.

They're detachable for the transformation, so if you play around with some wires, you'll be able to get the grappling effect.

Reborns is sounding better and better to me :D Can't wait for hobby shops to get it.

darkstrife 2009-09-18 22:14

Quote:

Originally Posted by vektar (Post 2652234)
i dont think it matters as long as its glue. i use testors cement for plastic models.

i heard cement is quite strong, the gaps between the two wing parts (where they snap together) is quite small, when you applied the adhesive, what did u do to prevent the glue from 'overflowing' onto the surface of the wing parts?

vektar 2009-09-18 23:56

Quote:

Originally Posted by darkstrife (Post 2652728)
i heard cement is quite strong, the gaps between the two wing parts (where they snap together) is quite small, when you applied the adhesive, what did u do to prevent the glue from 'overflowing' onto the surface of the wing parts?

i just added a small amount and there was no real run off
Spoiler for the glue'n of the wing:

bio9205 2009-09-19 00:16

Hey guys, for the clear part on 00 S2 weapons, what do you use to paint them blue? Highlighters work for me, but they take eons to dry =.=

Also, how do you keep the red "crystal" on Cherudim's forehead on? it keeps dropping off.

darkstrife 2009-09-19 05:37

Quote:

Originally Posted by vektar (Post 2652861)
i just added a small amount and there was no real run off
Spoiler for the glue'n of the wing:

thanks for the pics vektar, it would really help. i'm trying to fix up my Freedom MG in the upcoming uni holidays as it was my first MG and i dont think i did a very good job with it lol ><

duotiga 2009-09-19 07:12

more on MG Blue Frame 2nd Revise
http://farm4.static.flickr.com/3491/...762ec86c_o.jpg
http://farm4.static.flickr.com/3469/...04757c37_o.jpg
http://farm4.static.flickr.com/3482/...0e6d62c1_m.jpg

LordStrike 2009-09-19 08:54

yay i finally got the reborns gundam :)

duotiga 2009-09-19 10:05

Quote:

Originally Posted by LordStrike (Post 2653418)
yay i finally got the reborns gundam :)

bought 2 ...but have yet to start =x

astranagun 2009-09-19 10:12

So... is the original mode the twin Beam blade tonfa?

atlans89 2009-09-19 10:39

I like its design. I'm growing tired of Seed backpack design, so the Astray are the only Seed's gundam still attract me over this time.

Sir Dearka 2009-09-19 11:29

Quote:

Originally Posted by yusawateva (Post 2640269)
how are the articulations of the new seed gundams? are they as good as the new ones or as bad as the old seed 1/100s?

Quote:

Originally Posted by ~Destiny~ (Post 2640919)
Exactly the same as the old 1/100's afaik

Then you don't know "as far" ;) The new Buster has an upgraded leg joint so they can move vertically.



All times are GMT -5. The time now is 11:40.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.