2006-02-04, 22:21 | Link #1 |
Senior Member
Join Date: Dec 2005
Location: US
|
What happens when you poke the IDE cable?
So I just found out I don't have much luck when cleaning my computer.
3 years ago I ruined my ATI 9700 pro. (never hold the freaking air can upside down. -_-;;;;) And this time I somehow managed to put some nice dents in my IDE cable while I had the drives out. Anywho now the CD/DVD drives are going really, REALLY slow (like ~45s from disk recognition to opening explorer). While I'm 99% sure this is because of the cable can anyone confirm? It's not at the point where there's a see-through hole in the cable but it's nicely dented. Shaped like the lead tip of a pencil, a little smaller in size. |
2006-02-04, 23:06 | Link #4 |
Gao~ a sound for the ages
Join Date: Nov 2003
Location: I live in a relm of swirling of thought and emotion, Ever lost in the relm of infinite possiblities.
Age: 37
|
Skip a couple of lunches. Or if its on a card sell your lunch to a friend.
I've done that a couple of times it hasnt had that much effect on me. *Body type info* 6 foot tall 130 Pounds Well... I definitely didnt do it often enough to get these kind of results. |
2006-02-05, 18:03 | Link #5 | |
Love Yourself
Join Date: Mar 2003
Location: Northeast USA
Age: 38
|
Quote:
__________________
|
|
2006-02-06, 13:16 | Link #6 |
Senior Member
|
A damaged cable would result in data errors. Check the windows event log for read errors coming from a cdrom device. If you have this then swap out the cable and test again. A small dent or crimp won't have any effect on data transfer speeds, but significant damage will (IE it's been badly mashed or the insulation is ripped.)
If you've got lots of read errors in the event log, even after you replace the cable, check if you've installed any games that use "StarForce" copy control, as that's known to deliberately damage CD-Rom performance over time. If that's not the case, then it's quite possible that your drive is damaged. Test it in someone else's system before replacing it. Also, it's not foam. The same material that blows out of the bottle when held properly is the same stuff that comes out when you hold it upside down. The only difference is that upside down it comes out super-cold, causing it to come out as a liquid. It expanding outside the can drops the temperature in that area so much that carbon dioxide will condense and solidify on whatever you hit, and that also leaves lots of moisture behind. |
2006-02-06, 19:45 | Link #7 | |
Animeblogger
|
Quote:
Just go to a dump, and rip one out of an old pc, or find another computer that someone is chucking out. (just dont get a floppy drive one) They are incredibly easy to get and i'd consider them worthless. On the other hand, it would probably cost about $5us to get a nice rounded IDE cable - they are worth it ^^ |
|
2006-02-09, 22:31 | Link #8 | |
Senior Member
Join Date: Dec 2005
Location: US
|
Quote:
|
|
2006-02-10, 17:28 | Link #9 |
~DESU
Join Date: Feb 2004
Location: Vancouver, Canada eh?
Age: 37
|
twisting and bending IDE cables shouldnt slow down transfer rates. I have crumpled IDE cables into more shapes and poses than a yoga master and I have never had a problem. Its a differrent story if the cables are physically broken however. Anyway, you can grab IDE cables for $1-2 so its not like its expensive to replace if there is something wrong.
|
|
|