AnimeSuki Forums

Chiu_fan · 2012-11-04, 02:46

Quote:

Originally Posted by Skye629

Anyone know a good tool with a sharp/fine tip that helps scrape away paint/gundam marker that is not sharp enough to damage plastic and maintain its point?

(trying to clean excess on Sleeve parts ;_

Try using a simple toothpick with a little thinner. That's what I do when cleaning up those kinds of cases.

Skye629 · 2012-11-04, 03:16

Quote:

Originally Posted by Chiu_fan

Try using a simple toothpick with a little thinner. That's what I do when cleaning up those kinds of cases.

Thats what I am currently doing, however the points always end up blunting after about 3-5 uses >_<

Thats y I am trying to see if I can find some sort of metal or plastic replacement that will last

bio9205 · 2012-11-04, 04:41

Toothpicks work great for me too. My guess is that metal or plastic is more likely to scratch the plastic.

suiton629 · 2012-11-04, 09:17

Quote:

Originally Posted by bio9205

As much as I'd like to see some GSD suits get the RG treatment, they're unlikely to happen unless we see a GSD remaster, probably next year. A safer bet is, say, Providence?

Ah, those annoying Sleeves markings.

I use a white paint marker to add details on some of my kits, and I'm planning to do the same for the Rozen Zulu. I use a few layers so I don't use silver as a base, but I guess I'm an amateur painter.

I guess that's true. But we do have all of Kira's suits in RG minus the Strike Freedom which I think is kind of a given considering how popular it is. Then we have the RG Justice that just came out with the MG Aegis. So maybe we will see a RG Aegis, then later an RG Infinite Justice?

Then I think if we get a Seed Destiny Remaster (which I don't see why they wouldn't since it'd give Bandai an excuse to release the episodes on overpriced BluRay which people will buy in Japan..lol), we will see Shinn's suits in RG..

Or am I being too crazy?

maknaedik · 2012-11-04, 09:27

Quote:

Originally Posted by suiton629

I guess that's true. But we do have all of Kira's suits in RG minus the Strike Freedom which I think is kind of a given considering how popular it is. Then we have the RG Justice that just came out with the MG Aegis. So maybe we will see a RG Aegis, then later an RG Infinite Justice?

Then I think if we get a Seed Destiny Remaster (which I don't see why they wouldn't since it'd give Bandai an excuse to release the episodes on overpriced BluRay which people will buy in Japan..lol), we will see Shinn's suits in RG..

Or am I being too crazy?

RG Impulse? How much of a nightmare will it be then? If they pull of the RG Zeta well, then I think it's is possible for them to do so.

suiton629 · 2012-11-04, 09:29

Quote:

Originally Posted by maknaedik

RG Impulse? How much of a nightmare will it be then? If they pull of the RG Zeta well, then I think it's is possible for them to do so.

Maybe they can make it a parts-former?

LoweGear · 2012-11-04, 09:31

Quote:

Originally Posted by maknaedik

RG Impulse? How much of a nightmare will it be then? If they pull of the RG Zeta well, then I think it's is possible for them to do so.

If they can make the RG Zeta, then an RG Impulse is a piece of cake in comparison. The Core Fighter system has been implemented on smaller scales before with other Gundam designs, and the Impulse itself doesn't have a particularly difficult transformation.

maknaedik · 2012-11-04, 09:43

Quote:

Originally Posted by LoweGear

If they can make the RG Zeta, then an RG Impulse is a piece of cake in comparison. The Core Fighter system has been implemented on smaller scales before with other Gundam designs, and the Impulse itself doesn't have a particularly difficult transformation.

Why haven't I thought of that? Thanks for the info. My only worry now is the core fighter. It has small pieces in MG and if they really are going stickerless here, then I that will be an interesting sight to see.

Chiu_fan · 2012-11-04, 09:50

Quote:

Originally Posted by Skye629

Thats what I am currently doing, however the points always end up blunting after about 3-5 uses >_<

Thats y I am trying to see if I can find some sort of metal or plastic replacement that will last

Simple solution: get a hobby knife and re-sharpen the toothpick.

suiton629 · 2012-11-04, 10:00

Quote:

Originally Posted by maknaedik

Why haven't I thought of that? Thanks for the info. My only worry now is the core fighter. It has small pieces in MG and if they really are going stickerless here, then I that will be an interesting sight to see.

We could get 2..?

1 as a core block and 1 as the actual plane.

Skye629 · 2012-11-04, 15:43

Quote:

Originally Posted by Chiu_fan

Simple solution: get a hobby knife and re-sharpen the toothpick.

Mind blown I never thought of that xD Thanks!

bio9205 · 2012-11-05, 01:04

RG Aegis won't happen. RG Justice was easy because they reused Freedom's frame, Aegis is more complex (easier than Zeta, granted) plus it's less popular. Really interesting to see where Bandai goes with the RG line from here.

maknaedik · 2012-11-05, 01:16

Quote:

Originally Posted by bio9205

RG Aegis won't happen. RG Justice was easy because they reused Freedom's frame, Aegis is more complex (easier than Zeta, granted) plus it's less popular. Really interesting to see where Bandai goes with the RG line from here.

I'd say Providence is next

Skye629 · 2012-11-05, 01:56

I want some RG's from the Gundam Project (0083)

RG GP-01, 02, 03, and 04/Gerbera Tetra would be sick

StrikeFreedomV2 · 2012-11-05, 02:34

Quote:

Originally Posted by Skye629

I want some RG's from the Gundam Project (0083)

RG GP-01, 02, 03, and 04/Gerbera Tetra would be sick

You have good taste, sir

maknaedik · 2012-11-05, 02:58

Quote:

Originally Posted by StrikeFreedomV2

You have good taste, sir

Those, I think, have high chances of getting RG treatment.

LoweGear · 2012-11-05, 05:03

Quote:

Originally Posted by suiton629

We could get 2..?

1 as a core block and 1 as the actual plane.

A fully transformable core fighter is perfectly doable with the RG series. Look at the RG RX-78-2 Gundam: it has a more complex Core Block system, yet it managed to do so on that scale perfectly without parts swapping, and the Impulse's Core Splendor has a much simpler system. That said, the RG RX-78-2 does include a separate non-transforming Core Block so you can display the Core Fighter separately from the Gundam.

suiton629 · 2012-11-05, 11:41

Um.. Is the RG Strike Rogue and RG Strike (Deactivated Mode) worth the money?

RX93-2 · 2012-11-05, 15:49

They have some flaws so I'd wait for a 2.0 if I where you.

suiton629 · 2012-11-05, 17:58

Quote:

Originally Posted by RX93-2

They have some flaws so I'd wait for a 2.0 if I where you.

RG kits get 2.0...?

2012-11-05, 11:41	Link #27978
suiton629 Master Grade Master Join Date: Jul 2011	Um.. Is the RG Strike Rogue and RG Strike (Deactivated Mode) worth the money? __________________ 水遁六百二十九

2012-11-04, 04:41	Link #27963
bio9205 Reborn Join Date: Sep 2009 Age: 29	Toothpicks work great for me too. My guess is that metal or plastic is more likely to scratch the plastic.

2012-11-05, 01:04	Link #27972
bio9205 Reborn Join Date: Sep 2009 Age: 29	RG Aegis won't happen. RG Justice was easy because they reused Freedom's frame, Aegis is more complex (easier than Zeta, granted) plus it's less popular. Really interesting to see where Bandai goes with the RG line from here.

2012-11-05, 01:56	Link #27974
Skye629 Senior Member Join Date: Sep 2011	I want some RG's from the Gundam Project (0083) RG GP-01, 02, 03, and 04/Gerbera Tetra would be sick

2012-11-05, 15:49	Link #27979
RX93-2 White Unicorn Join Date: Jan 2012	They have some flaws so I'd wait for a 2.0 if I where you.