Gundam Models Discussion Thread

[LoweGear]

Originally Posted by Awrya

The handle resembles AGE-2 beam rifle more then GN Sword II. GN Sword II is a bit slimmer than this.

It doesn't resemble the AGE-2 beam rifle. IT IS the AGE-2 Hyper Dods Rifle, just heavily modified into a Lance.

Originally Posted by Detective-san

^ The MG Ground Gundam is weeping a corner right now.

It's cried an ocean for the last several years with all the poseable MG's that came out. There are only a few modern MG's that the MG Gundam Ground Type can honestly out-pose, including the MG Unicorn.

[casval cehack]

The Ground Gundam had its time. Now, some newer HG can bet it too, kneeling wise.

Who would buy the MG Blitz just to transplant its right arm to the Gold Amatsu, making it more accurate?

[LoweGear]

Originally Posted by casval cehack

The Ground Gundam had its time. Now, some newer HG can bet it too, kneeling wise.

Hell, the HGUC Gundam Ground Type kneels better than the MG.

[MakubeX2]

Originally Posted by casval cehack

Who would buy the MG Blitz just to transplant its right arm to the Gold Amatsu, making it more accurate?

I'm not sure if the new MG Blitz's right arm will fit onto the old Amatsu. It's just might be a tad smaller given the downsizing from the old 1/100 line.

[Obelisk ze Tormentor]

Originally Posted by MakubeX2

I'm not sure if the new MG Blitz's right arm will fit onto the old Amatsu. It's just might be a tad smaller given the downsizing from the old 1/100 line.

But both arms are connected by the same polycap connector, right?

[MakubeX2]

Originally Posted by Obelisk ze Tormentor

But both arms are connected by the same polycap connector, right?

It does not matter. My point is the are might look out of place here :-



A more apt choice will be to put it onto the MG Red/Blue frame and work it from there.

[Butagami]

Blitz is Sexy! Do want.

Finally saw Unicorn ep 5 the other day. It just keeps getting better and better, doesn't it?

Spoiler for Thoughts about it:

Cringed when Delta PLus got owned by Banshee. Especially when it got Clawed and sort of 'recoiled' back up. Story-wise, it was all well executed, loved Zinnerman hamming it up to get Marida back. One of the best parts was when Audry called out to Banagher while jumping out of the plane, and the scene that followed that

Can anyone tell me what that suit that Angelo was piloting was?
EDIT: Nevermind, it was the Rozen Zulu.

I'm wondering if they'll release a MG ReZEL commander type General Revil color... It looked nice on them.

[Obelisk ze Tormentor]

Phew... I finally finished this dude:

Spoiler for More:

A lot of people complain about Exia’s legs, but mine doesn’t have any problem at all. It’s solid and can stand easily. The legs don’t split on their own. It can even stand on one leg/foot without falling unless you shake it.



The real problem with this kit is the wrist. I hate it . Thanks to the weak wrists, the hands always pop out whenever I fiddle it to hold the swords.

Spoiler for Comparison:

Brosword ^_^

All in all, it’s a decent kit. The color is gorgeous and the articulation is good. I like it very much. I’m glad I bought this with a bargain price.

[Appel]

i must say that the chrome plated pieces do look really awesome on this version of the exia^^

[casval cehack]

Originally Posted by MakubeX2

I'm not sure if the new MG Blitz's right arm will fit onto the old Amatsu. It's just might be a tad smaller given the downsizing from the old 1/100 line.

Isn't making them look out of place the point of the Amatsu mod? I did check, both the gold Amatsu and the MG Blitz (assuming it's based on the MG Duel frame) uses a polycap and peg arm joint, PC6 for the former and PC12 for the latter. The MG Red/Blue frames use a more different PC2. These polycap differences are nothing a "saw and hammer" couldn't fix.

[MakubeX2]

Originally Posted by casval cehack

Isn't making them look out of place the point of the Amatsu mod? I did check, both the gold Amatsu and the MG Blitz (assuming it's based on the MG Duel frame) uses a polycap and peg arm joint, PC6 for the former and PC12 for the latter. The MG Red/Blue frames use a more different PC2. These polycap differences are nothing a "saw and hammer" couldn't fix.

I'm sure the joints will be compatiable. Just that the MG Blitz's right arm might look a little thinner and shorter on the 1/100 Amatsu.

[firefox]

I finished 2 1/144 HG's this weekend



http://i18.photobucket.com/albums/b1...-10Gundam3.jpg

http://i18.photobucket.com/albums/b1...-10Gundam4.jpg

http://i18.photobucket.com/albums/b1...-10Gundam5.jpg

http://i18.photobucket.com/albums/b1...-10Gundam6.jpg

http://i18.photobucket.com/albums/b1...-10Gundam7.jpg

http://i18.photobucket.com/albums/b1...10Gundam10.jpg

http://i18.photobucket.com/albums/b1...10Gundam11.jpg

http://i18.photobucket.com/albums/b1...10Gundam12.jpg

http://i18.photobucket.com/albums/b1...10Gundam13.jpg

[casval cehack]

Originally Posted by firefox

I finished 2 1/144 HG's this weekend

They're fighting over which 1/144 gunpla in more articulated.

[Obelisk ze Tormentor]

Originally Posted by casval cehack

They're fighting over which 1/144 gunpla in more articulated.

It's more like they're fighting over which one looks closer to the original Gundam .

[LoweGear]

Originally Posted by Obelisk ze Tormentor

It's more like they're fighting over which one looks closer to the original Gundam .

And the HGUC RX-78-2 wept because its descendants have better poseability than it

At least the RX-78-2 has the G-Armor XD

[firefox]

Originally Posted by casval cehack

They're fighting over which 1/144 gunpla in more articulated.

That would be a tough battle as they have nearly identical posability as their construction is very much alike

Will be cool when my RG Strike wil be build, then we have a trio of super posable RX-78 decendants.

[kaizerknight01]

Originally Posted by casval cehack

They're fighting over which 1/144 gunpla in more articulated.

Bah then enter the AGE 2 Dark Hound problem solved

[suiton629]

I hope we get a:

MG Age-2 Normal (white)
MG Age-2 Dark Hound

[bio9205]

Originally Posted by xxnike629xx

I hope we get a:

MG Age-2 Normal (white)
MG Age-2 Dark Hound

Yeah, a MG Dark Hound seems quite possible and would be totally awesome. Doubt it for the white AGE-2, though. Minor appearance and can be easily painted from the original MG.

[suiton629]

Originally Posted by bio9205

Yeah, a MG Dark Hound seems quite possible and would be totally awesome. Doubt it for the white AGE-2, though. Minor appearance and can be easily painted from the original MG.

Can't Bandai just release it as a "limited" kit? I mean it's just a repaint of the armor pieces in white. Very little cost to them, and they can add a slight premium (aka profits).