AnimeSuki Forums

Register Forum Rules FAQ Members List Social Groups Search Today's Posts Mark Forums Read

Go Back   AnimeSuki Forum > Support > Tech Support


Thread Tools
Old 2010-07-05, 20:05   Link #1
v イイエイイエイイエ!!!v
Join Date: Jun 2008
Location: C Natural, B Natural
Age: 24
Hot-Swapping Drives Concern

I was doing a transfer of HDDs earlier today and I, being the general idiot that I am, unplugged the SATA power cable that goes to my system drive. I was pretty sure it was the system drive because an I/O device error popped up in Windows and it locked up and froze. I switched the PSU off and plugged the power cable back in and now the HDD won't spool up or power on.

iirc hot-unplugging hard drives can fry a PSU or mobo from a small power surge that comes in when plugging in the hard drive.

HDD in concern: HITACHI Deskstar HD30500 IDK/7K (0S00161) 500GB 7200 RPM 16MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive

I'm worried about this because IT IS MY SYSTEM DRIVE

Posts in reference:

Last edited by Ota-kun; 2010-07-05 at 20:21.
Ota-kun is offline   Reply With Quote
Old 2010-07-05, 22:23   Link #2
*IT Support
Join Date: Feb 2009
Location: Pennsylvania , United States
Age: 29
Although SATA can be hotswapable, it's never a good idea to hotswap a SATA drive that is connected directly to the PSU and motherboard. If you are temporarily transferring data to another drive, you should use a SATA to USB 2.0 adapter or enclosure. This ensures safe hot swapping of drives.

My suggestion is to get an adapter I have mentioned and try connecting the drive from there. If your drive power up and mounts to the computer, the PSU/motherboard may need replacing. To be sure, try hooking up a different drive directly to the motherboard and PSU. If you are unable to get the drive mounted to the computer with a SATA/USB 2.0 adapter, the drive is pretty much dead. If that is the case, you need to sent it in for data recovery, which can cost a lot of money.

Next time, make sure you have a full backup of your system drive before doing anything risky. This way, you can just get a new drive and restore with minimal data loss.
chikorita157 is offline   Reply With Quote
Old 2010-07-05, 22:48   Link #3
v イイエイイエイイエ!!!v
Join Date: Jun 2008
Location: C Natural, B Natural
Age: 24
Alright I'll try it out using a SATA adapter I have lying around in another room. If that doesn't work I can try doing a PCB swap with an extra dead drive I have that has the same PCB code as the hard drive that won't power on. Though I'll only do that if the SATA adapter solution doesn't work since the PCB swap is kind of a last resort option.
Ota-kun is offline   Reply With Quote

hard drive, hardware, problem

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 14:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
We use Silk.