Gundam Models Discussion Thread

[StrikeFreedomV2]

Originally Posted by Shinobi2013

Anyway I like to show off my customized HG 1/144 Gundam Wing EW series:

Spoiler:

Wow man, just... wow How did you get your hands on those? Are these resin kits or how did you make them? I would love to get HGs of the EW line, if they look like yours

[suiton629]

Originally Posted by StrikeFreedomV2

Wow man, just... wow How did you get your hands on those? Are these resin kits or how did you make them? I would love to get HGs of the EW line, if they look like yours

Those look really nice, but the MG versions just look so epic. I really want Bandai (as you know) to remaster the Wing EW and Wing Zero EW to match the quality of the other Wing EW kits. And then finish up by releasing the movie suits.

Mainly my issue is lack of full frame and crappy hands and not being able to hold weapons.

[Skye629]

Originally Posted by Shinobi2013

To be frank, posting your beloved wishlist all over again will make the name 'suiton' even worse than posting your actual built kits, you should also understand why people make negative comments about you and realize your faults by now but it seems that you're still ignorant about it.


Anyway I like to show off my customized HG 1/144 Gundam Wing EW series:

Spoiler:

O_O

I think Sei and Mao just found another rival in building gunpla

Seriously, those are amazing

[suiton629]

Spoiler:

Are these silver, gray, or chrome parts?

[Yye1]

Originally Posted by suiton629

J

Wing EW
Seed
Seed Destiny
G
X
Age
00

Those are my favorites, and more than likely that'll be it for me as far as GunPla goes. So that's why I end up getting multiples of MGs to display all variations possible.

Age?! So somebody actually like Age? Also, dude, get some UC kits like Nu or Unicorn, they are pretty epic

[Rising Dragon]

... a lot of people liked AGE. Last I checked that wasn't a crime.

[ZeroXSEED]

To be fair, AGE model is rather good...

[Shinobi2013]

Originally Posted by StrikeFreedomV2

Wow man, just... wow How did you get your hands on those? Are these resin kits or how did you make them? I would love to get HGs of the EW line, if they look like yours

Those are scratchbuilt parts, made from plaplates and putty with the exception of Heavyarms' gatling gun and shield, the gatling gun came from a very cheap china toy which I found from a warehouse store while the shield came from 1/144 bootleg Heavyarms TV by Bendi ^_^

Originally Posted by suiton629

Those look really nice, but the MG versions just look so epic. I really want Bandai (as you know) to remaster the Wing EW and Wing Zero EW to match the quality of the other Wing EW kits. And then finish up by releasing the movie suits.

Mainly my issue is lack of full frame and crappy hands and not being able to hold weapons.

When it comes to MG or 1/100, I only bought the lead/main units and not counting the secondary units. Also like the newer EW kits, the old MG Wing EW/Custom looks very close to Hajime Katoki's lineart so it still match up with the newer EW kits appearance wise.
And do you think a full frame kit will entirely depends on a much better kit? Fitting the newer EW frame on Wing EW or Custom will make it look even worse especially the arms which the upper shoulder's frame is more exposed, someone already did it and it looks Goddamn awful. Also I like the articulated hands better than swapping hands since it's given a lot more purposes so you don't need to replace them.

[n0m@n]

Bandai has yet to release a perfect Zeta Gundam kit without any flaws. Zeta is indeed the best Gundam out there, so that's the only kit I want Bandai to rebuild for MG along with God Gundam (Yeah, the other two MG Zeta model kit is average or good, but not great).

[Knight-of-Gold]

Originally Posted by n0m@n

Bandai has yet to release a perfect Zeta Gundam kit without any flaws. Zeta is indeed the best Gundam out there, so that's the only kit I want Bandai to rebuild for MG along with God Gundam (Yeah, the other two MG Zeta model kit is average or good, but not great).

Its VERY hard to make a flawless Zeta. Its transformation is too complex.
The MG 2.0 is the closest to perfect as i've come across.

[n0m@n]

Originally Posted by Knight-of-Gold

Its VERY hard to make a flawless Zeta. Its transformation is too complex.
The MG 2.0 is the closest to perfect as i've come across.

Yes, MG2.0 was good. Even better than PG Zeta.
I still havent bought RG Zeta. Has it improved compared to MG2.0 in terms of transformation?

[Skye629]

Originally Posted by n0m@n

Yes, MG2.0 was good. Even better than PG Zeta.
I still havent bought RG Zeta. Has it improved compared to MG2.0 in terms of transformation?

Dont even consider the RG unless you want every scale of Zeta or are collecting RG's

The smaller scale = way more fragile and difficult to transform than even the 2.0



@Suiton on Exia R2

I dont know, do those LOOK like chrome or silver parts to you? Get some glasses/contacts man, they're straight normal innerframe gray


@ZeroXSEED: Indeed, the AGE kits are very good kits from a modeling perspective, though personally some of the designs dont quite hit it for me

[RX93-2]

Originally Posted by Yye1

Age?! So somebody actually like Age? Also, dude, get some UC kits like Nu or Unicorn, they are pretty epic

The show was terrible, gen 2 was so-so, and the show was downright insulting for the female gender.
The designs are pretty solid and the kits are good.

[Knight_SV]

Originally Posted by Shinobi2013

Those are scratchbuilt parts, made from plaplates and putty with the exception of Heavyarms' gatling gun and shield, the gatling gun came from a very cheap china toy which I found from a warehouse store while the shield came from 1/144 bootleg Heavyarms TV by Bendi ^_^



When it comes to MG or 1/100, I only bought the lead/main units and not counting the secondary units. Also like the newer EW kits, the old MG Wing EW/Custom looks very close to Hajime Katoki's lineart so it still match up with the newer EW kits appearance wise.
And do you think a full frame kit will entirely depends on a much better kit? Fitting the newer EW frame on Wing EW or Custom will make it look even worse especially the arms which the upper shoulder's frame is more exposed, someone already did it and it looks Goddamn awful. Also I like the articulated hands better than swapping hands since it's given a lot more purposes so you don't need to replace them.

surprisingly proto zero upper torso frame wasn't different from wing ew and wing zero custom. so i think they only need to fix the groin leg joint to be like what in proto zero

[firefox]

Originally Posted by Yye1

Age?! So somebody actually like Age? Also, dude, get some UC kits like Nu or Unicorn, they are pretty epic

yes i like AGE!

The show was not the best but the 1/144 HG models are top class. Their biggest pro's are easy, fun, smooth build, not alot of paint required and super posability.
I tried some 1/144 HGUC models, those are frustrating to build and require alot of paint. I trew them away and will get MG's for those i like from that universe.
I've been building since Wing came out, so almost 20 years and i love these AGE models.

Besides what i've seen from Unicorn it's not that great in terms of story, action wise it on par with AGE.

[Obelisk ze Tormentor]

Originally Posted by Shinobi2013

Anyway I like to show off my customized HG 1/144 Gundam Wing EW series:

Images

Sorry; dynamic content not loaded. Reload?

My god! Those are impressive ! I can't stop staring at them .

Yeah, as you can see, I'm kinda late to the party .

Originally Posted by suiton629

You can thank all the trolls, haters, and flamers for that.

Again, I just felt like posting it in my 'suiton' places was a waste of time as it just attracted a lot of negativity.

Dude, there's an old saying from my country "there will be no smoke if there's no fire". People will not hate you for nothing. The "fire" is your attitude in various Gunpla-related forums that caused all the "smoke" you get in the form of people who dislike you.

"You reap what you sow" or so they say. If you constantly and ignorantly do things that annoy people just for your self-satisfaction, then the said people will never see you in a positive light untill you change that habit of yours.

[StrikeFreedomV2]

Originally Posted by Shinobi2013

Those are scratchbuilt parts, made from plaplates and putty with the exception of Heavyarms' gatling gun and shield, the gatling gun came from a very cheap china toy which I found from a warehouse store while the shield came from 1/144 bootleg Heavyarms TV by Bendi ^_^

Amazing job man, really impressive^^

[suiton629]

Originally Posted by Yye1

Age?! So somebody actually like Age? Also, dude, get some UC kits like Nu or Unicorn, they are pretty epic

Age was and is good.

a. story was simple but well constructed (a bit rushed though towards the end)
b. mecha designs were great
c. animation was top notch
d. the whole multi-generation thing was interesting
e. the HGs and MGs were well put together, easily to build, and low cost

[maknaedik]

Originally Posted by Shinobi2013

To be frank, posting your beloved wishlist all over again will make the name 'suiton' even worse than posting your actual built kits, you should also understand why people make negative comments about you and realize your faults by now but it seems that you're still ignorant about it.


Anyway I like to show off my customized HG 1/144 Gundam Wing EW series:

Spoiler:

Welcome Ronald )

[ZeroXSEED]

I wish I can pain t well....