Burning [ANBU-AonE] Naruto 41 and 42

[vertue]

Hello, I have downloaded all of [ANBU-AonE]'s torrents up to ep 90.

Note: Episode 41 and 42 play fine on my computer but Nero told me 41 and 42 were no good... so thats what caused the error but.....

I am now trying to burn it onto DVD because I am low on space, I was able to burn 1-25 fine. But I when I burned 26-50 I get errros. I've realized that epidoe 41 and 42 are the cause of me wasting 5 DVD's. I've resumed bittorent [ANBU-AonE] Naruto 41-50, reburned and still got the error. Has anyone else had trouble burning episode 41 and 42, any help would be appreciated
- vErtuE

[_Sin_]

Since you are creating a Data DVD Nero shouldn't complain if the file can be played back on your PC.

What did the error message say exactly? (You can most likely reproduce the error by burning the files to the Image Recorder so you don't have to waste a DVD if you can't remember)

[vertue]

Originally Posted by _Sin_

Since you are creating a Data DVD Nero shouldn't complain if the file can be played back on your PC.

What did the error message say exactly? (You can most likely reproduce the error by burning the files to the Image Recorder so you don't have to waste a DVD if you can't remember)

Well I just used the Image Recorder and it suceeded successfully, on tht note, im going to use the image and attempt to burn the DVD, if it fails I will record the Error message back here.
Thanks again for your help

-vErtuE

[vertue]

Ok... I attempted to burn from the Image and I got
*Error reading Data
Note: 7 mintues 30 seconds into burning the DVD @ 2X, thought it would help if I burned it at 2X instead of 4X. It only got 24% done before the error, usually it gets to 80% or so *shurgs*. Incase this doesnt help below is a detailed explanation (log).
----------------------
vErtuE

150300016379928083316987

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 4:03:36 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM
Nero Version: 5.5.10.42 (Nero Express)
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0A - HA 3 TA 0 - 5.5.10.42
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Generic STEALTH DVD> Version: - HA 0 TA 0 - 5.5.10.42
Adapter driver: <St323dk> HA 0
Bus Type : default (0) -> SCSI, detected: ?

=== Scsi-Device-Map ===
CdRomPeripheral : Generic STEALTH DVD St323dk Port 0 ID 0 DMA: ?
DiskPeripheral : FUJITSU MHT2060AT atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TEAC DW-224E atapi Port 2 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 72351744 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 494MB (506288kB)
Free physical memory: 203MB (208324kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

11.9.2004
Burn DVD Image
6:31:51 PM #1 Text 0 File Reader.cpp, Line 115
Reader running

6:31:51 PM #2 Text 0 File Writer.cpp, Line 125
Writer _NEC DVD_RW ND-1300A running

6:31:51 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.

DAOI:
MediaCatalogNumber=''
TocType=0x00
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2048:
TrackMode='TRM_DATA_MODE1'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=274227200
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=495:45.27 ( 2230902)

6:31:51 PM #4 Text 0 File Burncd.cpp, Line 3745
Turn on Disc-At-Once, using DVD media

6:31:51 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CD-ROM Mode1, Joliet)
2 indices, index0 (150) provided
original CD pos #0 + 2230902 (2230902) = #2230902/495:45.27
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------

6:33:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 225
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 2230901 (495:45.26)

6:33:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 230
Write in overburning mode: FALSE

6:33:19 PM #8 Text 0 File DlgWaitCD.cpp, Line 1700
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193

6:33:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder _NEC DVD_RW ND-1300A for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 274227200

6:33:19 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CD-ROM Mode1, Joliet)
2 indices, index0 (150) provided
original CD pos #0 + 2230902 (2230902) = #2230902/495:45.27
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2230902 blocks [_NEC DVD_RW ND-1300A ]
--------------------------------------------------------------

6:33:19 PM #11 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

6:33:19 PM #12 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

6:33:19 PM #13 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 2x (2,760 KB/s)

6:33:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0

6:33:19 PM #15 Text 0 File DVDR.cpp, Line 1443
Recording mode: Sequential Recording Mode

6:33:19 PM #16 Text 0 File Mmc.cpp, Line 18419
Set BUFE: JustLink -> ON

6:33:19 PM #17 Text 0 File DVDR.cpp, Line 1557
Start write address at LBA 0
DVD high compatibility mode: Yes

6:33:19 PM #18 Text 0 File Cdrdrv.cpp, Line 7929
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:33:34 PM #19 Text 0 File Writer.cpp, Line 316
18:33:34.078 - _NEC DVD_RW ND-1300A : Queue again later (Intervall : 23msec)

6:40:51 PM #20 TRANSFER -25 File Reader.cpp, Line 348
Error reading Data

6:40:54 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

6:41:22 PM #22 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 2x (2,760 KB/s)

6:41:22 PM #23 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 4:03:36 PM
File 'Drivers\st323dk.sys': Ver=3.23.0.0, size=88736 bytes, created 10/13/2002 8:24:30 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)