AnimeSuki Forums

Register Forum Rules FAQ Members List Social Groups Search Today's Posts Mark Forums Read

Go Back   AnimeSuki Forum > Support > Tech Support


Thread Tools
Old 2013-06-28, 14:15   Link #1
Bittersweet Distractor
Join Date: Nov 2007
Age: 25
Graphics Card Question

So I was cleaning my computer yesterday and in my negligence I bumped by graphics card and knocked off what I believe is a capacitor. Sorry for the image quality here but this is what the damage looks like:


It says C502 next to the tiny little block (Well where it's supposed to be anyways). My computer refuses to turn on with this graphics card in it, so it obviously isn't working. The graphics card in question is the GTX GeForce 470.

So my question(s), would be the following....

1. Can this be soldered back on? If so, how easy would it be for me to do this on my own? I tried calling around locally for soldering, but basically nowhere offers such service that I know of. Any suggestions?

2. If this is not possible then I guess I have to get a new videocard. Problem is my motherboard has PCI 2.0 slot. Are 3.0 really backwards compatible with 2.0? Is there any noticeable performance difference if I stick a 3.0 card into a 2.0 slot?
Reckoner is offline   Reply With Quote
Old 2013-06-28, 14:29   Link #2
Urzu 7
Join Date: Apr 2006
Location: New England
Age: 33
What about getting a PCI 2.0 card? Did you try ebay?

I found this on newegg.

Geforce GTX 560 Ti. 2 GB card and PCI 2.0. $169.99.
Urzu 7 is offline   Reply With Quote
Old 2013-06-28, 14:59   Link #3
temporary safeguard
Join Date: May 2004
Location: Germany
Age: 36
If you own a soldering station, you can of course solder it back on.
How easy it is depends on the placement on the card.
If there is a lot of other stuff and contacts around the spot, it's harder to do.
If there is enough free space around it, you can't do much wrong. In any case make sure you got a voltmeter and after soldering check if you did not short circuit the connection.

But what exactly are we seeing on that picture? I dont see a graphics card nor a cap.

Is it one of those IC caps? Maybe 2x1mm squared, light brown color code.
Or is it one of those round caps on two legs? In that case it is most likely broken.
The number most likely identifies the C on the graphic card's blueprint and does not say anything about type of C itself.

It just loaded up the first pic.

for soldering that, apply a bit of solder to both contacts on the board (it will stick because of adhesive forces, but make sure you do not heat it up too much and do not apply too much solder, keep it kind of 'flat').
Then put the C on top in the right position (orientation does not matter for Cs), press it down with squeezers and heat up both sides one after the other. Let it cool down before you release the pressure.
Check the connection with the voltmeter.

btw. I can not clearly see it in the picture, but if the connector plate (little silver squares in the board, where ICs are supposed to go) got ripped out with the C, you may be screwed

Last edited by Dhomochevsky; 2013-06-28 at 15:12.
Dhomochevsky is offline   Reply With Quote
Old 2013-06-28, 17:11   Link #4
Bittersweet Distractor
Join Date: Nov 2007
Age: 25
Thanks for the response . I don't think the plates got ripped off, just the cube. Well I'm going to give it a try. Better than not doing anything and wasting $200 >.>
Reckoner is offline   Reply With Quote
Old 2013-06-30, 14:41   Link #5
Senior Member
Join Date: Oct 2007
Location: Philippines
Age: 40
Not much of a problem to put the capacitor back onto the board with a good soldering iron, or replace it (provided that you jotted down the full info on the capacitor in question; I once did replaced several capacitors on a video card after they suffered from bloating).
sa547 is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 13:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2017, vBulletin Solutions Inc.
We use Silk.