AnimeSuki Forums

justsomeguy · 2009-04-15, 14:47

Quote:

Originally Posted by JayCee

Tamiya epoxy putty is relatively quick and cures fully within 5-6 hours

Thanks. I'll see how it turns out.

Sworra · 2009-04-15, 18:33

Hi I'm new to this forum page but i have been reading a lot of the posts that people have been posting.. I have a quick question but just wanted more opinions about my question. Is it true that you can use Mr.Surfacer 500 as a primer. or is it a putty? I'm a bit confused to what you can use it for? both or one or the other.

Thanks.

JayCee · 2009-04-16, 02:09

Quote:

Originally Posted by Sworra

Hi I'm new to this forum page but i have been reading a lot of the posts that people have been posting.. I have a quick question but just wanted more opinions about my question. Is it true that you can use Mr.Surfacer 500 as a primer. or is it a putty? I'm a bit confused to what you can use it for? both or one or the other.

Thanks.

You're on the right track. Some people use it as an alternative to a primer. In general Mr surfacer is used to fill in surface imperfects and defects as you prime. However it shouldn't be used as a general primer. You should see Mr filler as a filler of convenience where using putty might be too much.

In a nutshell:
Primer = painting adhesive/defects spotter
Mr surfacer = filler .

Hope that helps

muffinkevin · 2009-04-16, 02:58

Quote:

Originally Posted by M_Flores

Still a work in progress...

Spoiler:

Where did you find that wallapaper for your PS3? Can you post it?

Astrana · 2009-04-16, 04:02

Quote:

Originally Posted by muffinkevin

Where did you find that wallapaper for your PS3? Can you post it?

i think thats a modded PS3 since all the icon are custom as well

duotiga · 2009-04-16, 07:38

release today

http://www.1999.co.jp/eng/10083921

http://www.1999.co.jp/eng/10083918

http://www.1999.co.jp/eng/10083869

LightningZERO · 2009-04-16, 08:08

Sword Impulse!!! Amazing!!!

duotiga · 2009-04-16, 08:16

teaser for 1/100 00 raiser designer color + gn sword III rear view

Tormenk · 2009-04-16, 08:20

*bellows an almighty roar at Bandai*

Quote:

Originally Posted by JayCee

Yes it is possible. Though spray cans are much easier to use for a good levelled layer.

(Though I cannot confirm if Gunze has liquid topcoats. I know there are some out there of a different brand.)

*edit: If you ever find any resources on handpainting topcoats I'm more than interested on hearing about it. To be honest it's almost unheard of as it's just uncommon to handpaint topcoats. About the only thing I can think of is women who do nail varnishes that applies liquid topcoats. Although suitable for their purpose not for gunplay of course*

Sure thing.

Well at least it confirms that possibility. I've been turning over the idea of spraying the topcoat into a jar and applying it on by hand since I tend to miss out spots when spraying. Not entirely sure how viable it is though.

LoweGear · 2009-04-16, 08:27

Spoiler for GN-005/PH Gundam Virtue Physical:

LordStrike · 2009-04-16, 08:51

hey all i got one question is there an HG 1/100 Gundam Exia (Roll-out Color) out already or is it going to come out? any one knows?

Tormenk · 2009-04-16, 08:55

There is a NG 1/100 Exia in roll-out colors already available.

kakakka · 2009-04-16, 08:56

You mean No Grade 1/100? I think they already released it. I remember seeing one from the store I usually look for Gundam Models.

EDIT: Late ><

LordStrike · 2009-04-16, 08:58

ok cool thx for the info im sooo going to get the exia roll-out colors

C.A. · 2009-04-16, 09:02

Hmmm there's the Gundam Unicorn Titanium Finish Version, is there any news for a special finish Sinanju?

I'm thinking of buying both Unicorn and Sinanju, but I like to be consistent in versions. I'll either buy both normal versions of if there's a special finish Sinanju, I'll get both special finish versions.

Tormenk · 2009-04-16, 09:10

None so far but given Bandai's tendencies, a special finish Sinaju is still possible.

Though I'm not sure how appealing it would be after having to put a ton of stickers onto a special finish Sinaju. But that's just me.

Edit: and to share the general idea how a special version Sinaju might look like here's two examples. Not to worry the second image is shown upright despite the thumbnail preview.

C.A. · 2009-04-16, 09:17

Hmmm I'm mostly considering Titanium Unicorn because I heard it has the gatling gun, or some other extra weapon.

I'm also fine with saving some bucks with the normal Unicorn though.

Tormenk · 2009-04-16, 09:22

That would be incorrect. The Titanium finish does not come with the gatling gun(s).

C.A. · 2009-04-16, 09:33

Quote:

Originally Posted by Tormenk

That would be incorrect. The Titanium finish does not come with the gatling gun(s).

I see lol, I think I'll stick with normal versions then.

I think Sinanju looks better in metallic than Unicorn.

M_Flores · 2009-04-16, 09:54

Quote:

Originally Posted by muffinkevin

Where did you find that wallapaper for your PS3? Can you post it?

I found the wallpaper in this forum, actually. It's in the Image Thread, in one of the pages (I'll try and find the page and throw you a PM later).

2009-04-16, 08:08	Link #12587
LightningZERO You are Dominated! Author Join Date: Dec 2004 Location: Earth Age: 35	Sword Impulse!!! Amazing!!! __________________ その再生を破壊する Destroy This Rebirth

2009-04-16, 08:27	Link #12590
LoweGear Secret Society BLANKET Graphic Designer Join Date: Oct 2006 Location: 3 times the passion of normal flamenco	Spoiler for GN-005/PH Gundam Virtue Physical: __________________ Against all the evil that hell can conjure, all wickedness that mankind can produce... We will send unto them, only you.

2009-04-16, 08:51	Link #12591
LordStrike Gundam Meister Join Date: Nov 2008 Location: USA-Florida	hey all i got one question is there an HG 1/100 Gundam Exia (Roll-out Color) out already or is it going to come out? any one knows? __________________

2009-04-16, 08:55	Link #12592
Tormenk Senior Member Join Date: Jul 2007 Location: Gaf's Room	There is a NG 1/100 Exia in roll-out colors already available. __________________ "Are you afraid of change? Or are you afraid to change?" "Wheel turns, river flows and life goes on." "Best way to kill a man, is to leave him alone." "Until you come, until we close our eyes."

2009-04-16, 08:58	Link #12594
LordStrike Gundam Meister Join Date: Nov 2008 Location: USA-Florida	ok cool thx for the info im sooo going to get the exia roll-out colors __________________

2009-04-15, 18:33	Link #12582
Sworra Senior Member Join Date: Apr 2009 Location: Alberta, Canada Age: 44	Hi I'm new to this forum page but i have been reading a lot of the posts that people have been posting.. I have a quick question but just wanted more opinions about my question. Is it true that you can use Mr.Surfacer 500 as a primer. or is it a putty? I'm a bit confused to what you can use it for? both or one or the other. Thanks.

2009-04-16, 07:38	Link #12586
duotiga Zander Yuusha Kyorugold Join Date: May 2003 Location: Singapore Age: 40	release today http://www.1999.co.jp/eng/10083921 http://www.1999.co.jp/eng/10083918 http://www.1999.co.jp/eng/10083869

2009-04-16, 08:16	Link #12588
duotiga Zander Yuusha Kyorugold Join Date: May 2003 Location: Singapore Age: 40	teaser for 1/100 00 raiser designer color + gn sword III rear view

2009-04-16, 08:56	Link #12593
kakakka Senior Member Join Date: Sep 2008	You mean No Grade 1/100? I think they already released it. I remember seeing one from the store I usually look for Gundam Models. EDIT: Late ><

2009-04-16, 09:02	Link #12595
C.A. Absolute Haruhist! Artist Join Date: Mar 2006 Age: 37	Hmmm there's the Gundam Unicorn Titanium Finish Version, is there any news for a special finish Sinanju? I'm thinking of buying both Unicorn and Sinanju, but I like to be consistent in versions. I'll either buy both normal versions of if there's a special finish Sinanju, I'll get both special finish versions. __________________ No longer a NEET so I'll not be online as often. Ignore gender and kick sexuality to the curb! I'm a big mecha fan, who keeps playing the SRW series. When I say 'My god...', god refers to Haruhi-sama. My art album updated 11th May 2013, Science. Deviant Art: http://ca0001.deviantart.com/

2009-04-16, 09:10	Link #12596
Tormenk Senior Member Join Date: Jul 2007 Location: Gaf's Room	None so far but given Bandai's tendencies, a special finish Sinaju is still possible. Though I'm not sure how appealing it would be after having to put a ton of stickers onto a special finish Sinaju. But that's just me. Edit: and to share the general idea how a special version Sinaju might look like here's two examples. Not to worry the second image is shown upright despite the thumbnail preview. __________________ "Are you afraid of change? Or are you afraid to change?" "Wheel turns, river flows and life goes on." "Best way to kill a man, is to leave him alone." "Until you come, until we close our eyes."

2009-04-16, 09:17	Link #12597
C.A. Absolute Haruhist! Artist Join Date: Mar 2006 Age: 37	Hmmm I'm mostly considering Titanium Unicorn because I heard it has the gatling gun, or some other extra weapon. I'm also fine with saving some bucks with the normal Unicorn though. __________________ No longer a NEET so I'll not be online as often. Ignore gender and kick sexuality to the curb! I'm a big mecha fan, who keeps playing the SRW series. When I say 'My god...', god refers to Haruhi-sama. My art album updated 11th May 2013, Science. Deviant Art: http://ca0001.deviantart.com/

2009-04-16, 09:22	Link #12598
Tormenk Senior Member Join Date: Jul 2007 Location: Gaf's Room	That would be incorrect. The Titanium finish does not come with the gatling gun(s). __________________ "Are you afraid of change? Or are you afraid to change?" "Wheel turns, river flows and life goes on." "Best way to kill a man, is to leave him alone." "Until you come, until we close our eyes."